Kk-Industries Cy3R-Hhs 460-40/25 kúpiť použité (57 848)

Stav: nový, Punching force: 55 t Approx. weight: 1,520 kg Height: 1,880 mm Motor: 5.5 kW Width: 1,500 mm Blade length: 317 mm Throat depth: 255 mm Stroke: 60 mm - With one cylinder - 5 workstations: Punching, notching station, and flat, bar, and angle steel shearing stations. Configured as follows: - Hydraulic and electrical components from renowned manufacturers - Support table at the punching station with scales and stops - Support table at the notching and flat bar stations with stops - Electric longitudinal stop 1,000 mm for automatic cutting release - Selector switch for setup and operation modes - Technical documentation - Lighting - 2 foot pedals - CE-compliant design Djdpfxsttc Upo Afqskn FEATURES / SPECIFICATIONS Punching force: 55 t Throat depth: 255 mm Stroke: 60 mm Strokes per min. (at 20 mm stroke): 25 Max. sheet thickness: Ø 20 x 20 mm Working height: 900 mm Shearing capacity: 300 x 15 mm, 200 x 20 mm Angle steel 45° (one leg): 70 x 70 x 10 mm Angle steel 90°: 120 x 120 x 12 mm Blade length: 317 mm Round: 40 mm Square: 40 mm Material thickness: 10 mm Width: 1,500 mm Depth: 950 mm Motor power: 5.5 kW Supply voltage: 400 V, 50 Hz Height: 1,880 mm Weight: 1,520 kg

Stav: nový, Punching force: 65 t Weight approx.: 1,600 kg Height: 1,880 mm Motor: 5.5 kW Width: 1,700 mm Blade length: 380 mm Throat depth: 305 mm Stroke: 55 mm Dkjdsttc Utopfx Afqjn - Equipped with one cylinder - 5 work stations: punching station, notching station, as well as flat, round, and angle steel cutting stations. Configuration includes: - Technical documentation - Hydraulic and electrical components from renowned manufacturers - Foot pedal - Mode selector switch for setup and operational mode - Support table with stops at the notching and flat steel stations - Support table with stops at the punching station - CE-compliant version TECHNICAL SPECIFICATIONS / VALUES Punching force: 65 t Throat depth: 305 mm Stroke: 55 mm Strokes per minute (at 20 mm stroke): 25 Max. sheet thickness (Ø 26 x 20 mm): 20 mm Working height: 900 mm Cutting capacity: 375 x 15 mm; 300 x 20 mm Angle steel 45° (one leg): 70 x 70 x 10 mm Angle steel 90°: 120 x 120 x 12 mm Blade length: 380 mm Round: 45 mm Square: 45 mm Material thickness: 10 mm Width: 1,700 mm Depth: 950 mm Motor power: 5.5 kW Mains voltage: 400 V, 50 Hz Height: 1,880 mm Weight: 1,600 kg

Stav: nový, Bending length: 3100 mm Sheet thickness: 5 mm Top roll diameter: 190 mm Technical data: Dkjdjd Ab Nispfx Afqen - Rear roll motorized drive - Cone bending device - Hardened and polished rolls - Entire frame made of St 52 steel - Asymmetric design for perfect bending - Top and bottom rolls driven by brake electric motors and planetary gearbox - Portable control panel - In compliance with CE standards Options: - Bottom roll motorized by electric motor EURO 1,925.00 - Digital display for rear roll position indication EURO 1,010.00 - Extended rolls EURO 966.00 - Profile bending rolls EURO 1,190.00 We have numerous references!

Stav: nový, Shaft diameter: 30 mm Upper roll diameter: 148 mm Lower roll diameter: 118 mm Working speed: 2–4 m/min Motor power: 0.7 – 0.85 kW Length: 600 mm Width: 800 mm Approx. weight: 220 kg Height: 1450 mm Technical Specifications: - Steel frame - Two lower rolls are driven - Direct drive system with gears - Upper roll runs idle (free turning) - Hardened rolls - Roller shafts are hardened and ground - Two-speed motor - Standard rolls - Adjustable guide rolls - Horizontal and vertical working position Options: Dedpfjd Eqqzsx Afqskn - Digital display EUR 600,-- - Angular side guide rolls EUR 900,-- - Double speed STANDARD - Brake motor EUR 150,-- PK 30 file Type Size Min. Dia Notes 150x10 20x6 1800 300 Standard Rolls 280x15 30x6 700 400 Standard Rolls 330x30 10x10 900 200 Standard Rolls 4Ø 30 Ø 10 900 200 Optional Rolls 5Ø 60x1.5 Ø 25x1.5 1000 600 Optional Rolls 61 1/2”x2.9 1/4”x1.8 600 300 Optional Rolls 750x30x3 40x20x2 1200 800 Optional Rolls 840x3 30x2 1200 800 Optional Rolls 940x40x5 30x30x4 600 300 Optional Rolls 1035x35x5 30x30x4 600 400 Optional Rolls 1150x6 20x3 600 400 Standard Rolls 1250x6 20x3 600 400 Standard Rolls 1350x6 20x3 600 400 Standard Rolls * Special washer (spacer) may be required / Only with special beam bending attachment • Capacities are given for 260 N/mm² plate yield strength

Stav: nový, Pressure: 65 Bending length: 2550 mm Distance between uprights: 2550 mm Installation height: 590 mm Djdpfx Aed Etfxefqokn Stroke length (max.): 300 mm Dimensions (LxWxH): 3680x1960x2500 mm Weight approx.: 5500 kg Motor power: 11 kW CNC Servo Electric Press Brake KKI Model: REVOLUTION DDM-6525 Servo-driven Press Brake REVOLUTION Servo-electric press brakes contain no hydraulic system and are the technology of tomorrow thanks to their flexibility and reliability. The increased speed and precision of this new generation of machines provide higher efficiency, ergonomic features, and an eco-friendlier production technology. As the first manufacturer of servo-electric press brakes in various models and tonnages, Dener is a pioneer in this technology, backed by extensive experience and quality. Standard Equipment: KK-Industries is the exclusive representative of the DENER group. We have developed a high-quality model for Europe: The CNC Servo Electric Press Brake by KK-Industries, manufactured by DENER: Technological Advantages – Model: REVOLUTION DDM The CNC Servo Electric Press Brake stands out for its high precision, accuracy, and versatile application capabilities. - 100% electric, 0% hydraulic oil - Up to 50% lower energy consumption compared to conventional hydraulic press brakes - High efficiency and accuracy - High bending speed and significantly quieter - Full frame length usable - Reduced maintenance costs - Environmentally friendly - User-friendly control panel - Automatic calculation of bending steps directly from STEP or DXF files - Up to 35% faster than hydraulic press brakes Standard Equipment: - 3D color graphic control Delem 66T 17" touchscreen - Y1, Y2, X, and R axes CNC-controlled - CNC crowning via the 3D controller - X-axis 500 mm, R-axis stroke 150 mm on 1.5 m and 2 m versions - X-axis 750 mm, R-axis stroke 250 mm for all other press brakes We also make no compromises with the upper tool and die and equip the CNC Servo Electric Press Brake KKI DENER REVOLUTION with quality tooling from EUROSTAMP Italy: - Segmented gooseneck upper tool - 4-V die block 60x60 (V = 16, 22, 35, and 50 mm) - Backgauge driven by servomotors on linear guides and ball screws Naturally, any machine is only as good as its service. For this reason, we focus on highly qualified staff with extensive experience in CNC sheet metal processing. - Laser safety system on the upper beam - CE-compliant safety equipment - Operating manual in GERMAN and ENGLISH Options: - Additional backgauge-controlled axes: X1, X2, R, Z1, Z2, Delta X - ATF type 6-axis backgauge, X1, X2 – R type backgauge - X-Prime type backgauge - Hydraulic upper and lower tool clamping for tools - CNC 3D touchscreen controller DELEM DA-69T KK-Industries GmbH

Stav: nový, Pressure: 175 Bending length: 3570 mm Distance between side frames: 3570 mm Installation height: 590 mm Stroke length (max.): 300 mm Dimensions (LxWxH): 5340x2100x2680 mm Weight approx.: 11,500 kg Motor power: 22 kW CNC crowning via control: yes CNC Servo Electric Press Brake KKI Model: REVOLUTION DDM-17535 Servo-driven Press Brake REVOLUTION Servo-electric press brakes do not contain a hydraulic system and, due to their flexibility and reliability, represent tomorrow's technology. The higher speed and precision of this new generation of machines offer you improved efficiency, ergonomic features, and eco-friendly production technology. As the first manufacturer of servo-electric press brakes with various models and tonnages, Dener is a pioneer of this technology, backed by extensive experience and quality. Standard equipment: KK-Industries holds the exclusive representation for the DENER group. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER offers: Dkjdod Etf Dspfx Afqen Technological advantages: Model REVOLUTION DDM - 100% electric, 0% hydraulic oil - Up to 50% lower energy consumption compared to conventional hydraulic press brakes - High efficiency and accuracy - High bending speeds and significantly quieter operation - Full-length utilization between the frames - Lower maintenance costs - Environmentally friendly - User-friendly control panel - Automatic calculation of bending sequences directly from STEP or DXF files - Up to 35% faster than hydraulic press brakes Standard features: - 3D color graphical control Delem 66 T 17" touch screen - Y1, Y2, X, and R axes CNC-controlled - CNC crowning via the 3D control - X-axis 500 mm, R-axis stroke 150 mm on 1.5 m and 2 m machines - X-axis 750 mm, R-axis stroke 250 mm on all other press brakes - No compromises when it comes to top tools and dies: fitted with premium tooling from EUROSTAMP Italy - Segmented gooseneck upper tool - 4-V die block 60x60 (V= 16, 22, 35, and 50 mm) - Back gauge with servo motors, linear guides, and ball screw - Laser safety device on the upper beam - CE-compliant safety equipment - Operating manual in GERMAN and ENGLISH Of course, every machine is only as good as its service. For this reason, we focus on highly qualified staff with extensive experience in CNC sheet metal processing. Options: - Additional controlled axes for the back gauge: X1, X2, R, Z1, Z2, Delta X - ATF type 6-axis back gauge, X1, X2, R type back gauge - X-Prime type back gauge - Hydraulic upper and lower tool clamping for tools - CNC 3D touchscreen control DELEM DA-69T KK-Industries GmbH

Stav: nový, Pressure: 40 Bending length: 1300 Distance between uprights: 1300 Installation height: 375 Dodod H Hh Hspfx Afqjkn Stroke length (max.): 150 Dimensions (LxWxH): 1880 x 2435 x 2320 mm Weight approx.: 3400 Motor power: 2 x 3.8 Electric Ball Screw CNC Press Brake KKI Model: REVOLUTION B-Servo 1550 mm x 40 t Standard equipment: KK-Industries is the general representative for the DENER group of companies. We have assembled a high-quality model for Europe. The CNC servo-electric press brake from KK-Industries, manufactured by DENER: Technological advantages: Model REVOLUTION B-Servo 1550 mm 40 t High speeds with ball screw drive The CNC servo-electric press brake is characterized by its high precision, accuracy, and versatile range of applications. - 100% electric, 0% hydraulic oil - Up to 40% lower energy consumption compared to conventional hydraulic press brakes - High efficiency and accuracy - High bending speed and significantly quieter - Lower maintenance costs - Environmentally friendly - User-friendly control panel - Automatic calculation of bending steps directly from STEP or DXF files - Up to 35% faster than hydraulic press brakes Technical Specifications Bending Length (B) 1550 mm Bending Capacity (press force) 40 tons Maximum Stroke 150 mm Daylight Opening (installation height, Q) 375 mm Approaching Speed 150 mm/s Bending Speed 20 mm/s Return Speed 150 mm/s Power 2 x 3.8 kW Weight 3400 kg Overall Length (A) 1880 mm Width (C) 2435 mm Height (D) 2320 mm KK-Industries GmbH There’s something for everyone!

Stav: nový, Hrúbka plechu: 1,8 mm Dĺžka ohybu: 2050 mm Priemer horného valca: 95 mm Technické údaje: - liatinové telo - manuálne alebo motorové (voliteľné) ohýbanie - po ohýbaní je možné horný valec vyklopiť do strany pre jednoduché vybratie materiálu - zariadenie na kužeľové ohýbanie - pohyb zadného a spodného valca hore-dolu manuálne pomocou ručného kolesa - prenosný ovládací pult - v súlade s normami CE Voliteľné príslušenstvo: Dodpfxod Ab Tvj Afqokn - zadný valec s pohonom, EURO 825,-- - digitálny ukazovateľ polohy zadného valca, EURO 1.010,-- - kryt tela, EURO 432,-- - tvrdené valce, EURO 940,-- Máme množstvo referencií!

Stav: nový, Dĺžka ohybu: 1250 mm Hrúbka plechu: 3 mm Priemer hornej valcovej rolky: 90 mm Technické údaje: - Liatinové telo - Manuálne alebo motorové (voliteľné) ohýbanie - Po ohýbaní je možné hornú valcu vyklopiť na stranu pre jednoduché vybratie materiálu - Zariadenie na kužeľové ohýbanie - Pohyb zadnej a spodnej valce manuálne ručne kolesom hore a dolu - Prenosný ovládací pult - V súlade s CE normami Voliteľná výbava: - Motorizovaná zadná valca - Digitálny displej na zobrazenie polohy zadnej valce - Kryt tela EURO 314,-- - Kalené valce EURO 550,-- - Premenlivá rýchlosť otáčania Dsdpfx Aod Ab Tyefqekn Máme veľa referencií!

Stav: nový, Dĺžka plechu: 1360 mm Hrúbka plechu: 6 mm Rozmery (D x Š x V): 2050 x 2250 x 1400 mm Motor: 7,5 kW Hmotnosť cca: 2300 kg Štandardné príslušenstvo: - NC riadenie - Programovateľný, motorizovaný zadný doraz s pojazdom 750 mm - Osvetlenie tieniacej línie - 1 kus dorazovej lišty s meradlom - 2 kusy podperných ramien na plechy - 1 kus podperného ramena na plechy (pri modeloch 1106, 1306, 1505) - Ochrana prstov - Guľôčkový transportný pás - Jednoduché nastavenie medzery nožov spredu - Guľôčkový skrutkový mechanizmus - Počítadlo rezov - Prenosný nožný pedál s havarijným vypínačom - Svetelná závora na zadných bezpečnostných krytoch Dsdpfx Afsgickkoqskn

Stav: nový, Working area: 2000 x 6000 Loading capacity: 1450 X-axis travel: 2020 mm Y-axis travel: 6050 mm Laser power: 4 kW Positioning accuracy: 0.05 mm Repeatability: 0.03 mm Weight approx.: 11,500 kg Dimensions (LxWxH): 10,000 x 4,400 x 2,120 mm The FLC series is a fast, precise, reliable, and cost-effective fiber laser cutting machine. It is a high-efficiency laser cutting machine with premium-class standards. Capable of handling up to 30,000 W laser power, it is an excellent choice for cutting thick plates. FLC fiber laser cutting machines are commonly used in the manufacturing of agricultural machinery, textile machines, food processing equipment, construction machinery, elevators, and other large-scale machines and systems. It is an ideal cutting machine for anyone looking to outsource cutting operations. Features wireless remote control for easy blowing, cutting, pausing, calibration simulation, and more. Standard nesting software quickly and automatically prepares parts for cutting without operator intervention. It also includes a flycut function. Equipped with a dual exchange table, enabling continuous operation without downtime. All our machines are manufactured to European standards and come with a CE certificate. FLC-type machines feature nozzle cleaning and a dual camera system. Available with cutting areas of 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. The laser head offers auto-focus and active anti-collision functionality, as well as Auto-View for obstacle recognition and automatic movement. Cutting heads have automatic cooling. Dodpfx Aeruwccofqjkn All our machine bridges are made from single-piece, welded aluminum alloy sheet construction. This design ensures stiffness and maintains shape under shocks, overlaps, or heavy loads. Compared to steel profile bridges, they are three times lighter, allowing for higher speeds and acceleration with lower motor power demand. Included accessories: - Water chiller - Control cabinet cooling - Automatic focus head - Nesting software - 19-inch touchscreen CNC control - Fly cutting - Nozzle and lens starter kit - Parts debris drawers - Automatic table changer - Automatic nozzle cleaning - CE compliance - On-site machine training - Wireless remote monitoring - Automatic lubrication system - Dual camera system

Stav: nový, Sheet length: 3,200 mm Sheet thickness: 10 mm Cutting width: 3,200 mm Total power requirement: 15 kW Weight approx.: 7,700 kg Dimensions (LxWxH): 3,800 x 1,820 x 1,920 mm Technical Data: Sheet thickness: 10 mm Cutting length: 3,200 mm Cutting angle: 1.30° Back gauge: motorized, 1,000 mm Motor power: 15 kW Length: 3,800 mm Width: 1,820 mm Height: 1,920 mm Weight: 7,700 kg Equipment: Swing cut design NC pre-selection control ELGO P 40 T with back gauge and cutting gap adjustment from the front via the controller motorized back gauge up to 1,000 mm clearly arranged control panel mounted on swing arm hydraulic hold-downs positioned close to the cutting edge foot pedal cutting gap adjustment cutting line illumination wide support table with ball inserts Dkedpfevap Thex Afqon foldable finger guard, 1,000 mm 1 side stop with T-slot 2 sheet support arms with T-slot simple blade changing and regrinding adjustable cutting length for efficient processing lower blade with 4 cutting edges upper blade with 2 cutting edges qualified customer service Operating manual ENGLISH Machine and equipment comply with CE regulations

Stav: nový, Sheet length: 3,200 mm Sheet thickness: 16 mm Cutting width: 3,200 mm Total power requirement: 22 kW Weight approx.: 10,600 kg Dimensions (LxWxH): 3,800 x 1,950 x 2,080 mm Technical data: Sheet thickness: 10 mm Cutting length: 3,200 mm Cutting angle: 1.30° Dsdpfevap Tnex Afqokn Back gauge: motorised, 1,000 mm Motor power: 22 kW Length: 3,800 mm Width: 1,950 mm Height: 2,080 mm Weight: 10,600 kg Equipment: Swing beam shear design NC preselection control ELGO P 40 T with back gauge and cutting gap adjustment from the front via the control unit Motorised back gauge up to 1,000 mm Clearly arranged control panel mounted on a swivel arm Hydraulic hold-downs positioned close to the cutting edge Foot switch Cutting gap adjustment Cutting line illumination Wide support table with ball transfers Folding finger guard, 1,000 mm 1 side gauge with T-slot 2 sheet support arms with T-slot Easy blade changing and regrinding Adjustable cutting length for cost-efficient machining Lower blade with 4 cutting edges Upper blade with 2 cutting edges Qualified customer service Operating manual in ENGLISH Machine and equipment compliant with CE regulations

Stav: nový, Sheet length: 4,000 mm Sheet thickness: 20.0 mm Cutting width: 4,000 mm Total power requirement: 22 kW Weight approx.: 20,000 kg Dimensions (LxWxH): 4,850 x 2,300 x 2,180 mm Technical Specifications: Sheet thickness: 20 mm Cutting length: 4,000 mm Djdjxxd D Uepfx Afqjkn Cutting angle: 2.30° Back gauge: motorized, 1,000 mm Motor power: 22 kW Length: 4,850 mm Width: 2,300 mm Height: 2,180 mm Weight: 20,000 kg Equipment: Swing beam design NC pre-selection control ELGO P 40 T Touch With back gauge and cutting gap adjustment from the front via the control unit Motorized back gauge up to 1,000 mm Clear control panel mounted on swivel arm Hydraulic hold-downs positioned close to the cutting edge Foot switch Cutting gap adjustment Cutting line illumination Wide support table with ball transfers Foldable finger guard, 1,000 mm 1 side gauge with T-slot 2 sheet support arms with T-slot Easy replacement and regrinding of blades Adjustable cutting length for efficient processing Lower blade can be used on 4 edges Upper blade can be used on 2 edges Qualified customer service Operating manual in ENGLISH Machine and equipment conform to CE regulations

Stav: nový, Tlak: 100 Valec: nehybný Zdvih: 350 Dsdpfx Aowwng Hofqokn Šírka stojana: 1050 Pracovná rýchlosť: 2 Rýchloposuv: 28 Dĺžka: 1900 Šírka: 850 Výška: 2250 Hmotnosť cca: 1030 Výškovo nastaviteľná pracovná doska – pohodlne nastaviteľná pomocou reťaze Bezpečné dvojručné ovládanie – komfortné ovládanie pomocou ručnej páky a tlačidla Nastaviteľný maximálny tlak – individuálne prispôsobiteľný pre rôzne aplikácie Integrovaný manometer – umožňuje presné sledovanie tlaku počas prevádzky Vyhotovenie v súlade s CE – vyrobené podľa aktuálnych bezpečnostných a kvalitatívnych noriem Prevádzkový návod – podrobný a zrozumiteľný, dostupný v nemčine a angličtine Dve pracovné rýchlosti – pre obzvlášť presnú a efektívnu prácu Obrázok je ilustračný

Stav: nový, Pressure: 1500 Cylinder: fixed Stroke: 350 mm Frame width: 1500 mm Working speed: 3 mm/s Rapid traverse: 22 mm/s Length: 2500 mm Width: 1200 mm Height: 2500 mm Weight approx.: 2450 kg Height-adjustable work table – convenient adjustment via chain Safe two-hand operation – comfortable control via hand lever and push button Adjustable maximum pressure – can be individually set for various applications Dkedpfewwnhdox Afqjn Integrated pressure gauge – enables precise pressure monitoring during operation CE-compliant design – manufactured according to current safety and quality standards Operating manual – comprehensive and easy to understand, available in German and English Two working speeds – for particularly precise and efficient operation The image is a sample photo.

Stav: nový, Pracovná plocha: 2000 x 6000 mm Nosnosť: 1850 kg Dedpfxotwtnzs Afqokn Osi zdvihu X: 2020 mm Osi zdvihu Y: 6050 mm Výkon lasera: 6 kW Presnosť polohovania: 0,05 mm Opakovateľnosť: 0,03 mm Hmotnosť cca: 16 000 kg Rozmery (DxŠxV): 13 200 x 2 800 x 2 300 mm Čas výmeny stola: 15 s Maximálna rýchlosť: 120 m/min FLC séria je rýchly, presný, spoľahlivý a nákladovo efektívny vláknový laserový rezací stroj. Ide o vysokoefektívne laserové rezacie zariadenie spĺňajúce štandardy vyššej triedy. Stroj umožňuje osadenie laserového výkonu až do 30 000 W, vďaka čomu je výbornou voľbou pre rezanie hrubých plechov. FLC vláknové lasery sa zvyčajne používajú na spracovanie strojov pre poľnohospodársku techniku, textilné stroje, potravinárske stroje, stavebné stroje, výťahy a iné veľké zariadenia a stroje. Ideálny rezací stroj aj pre zákazníkov, ktorí chcú výrobu outsourcovať. Umožňuje jednoduché fúkanie, rezanie, pauzovanie, kalibračnú simuláciu a ďalšie funkcie prostredníctvom bezdrôtového diaľkového ovládania. Štandardne používaný program na nesting pripraví diely na rezanie veľmi rýchlo a bez zásahu obsluhy. Navyše ponúka funkciu Flycut pre ešte rýchlejšie rezanie. Vďaka dvojitému výmennému stolu môžete rezať bez zbytočných prestojov. Všetky naše stroje sú vyrobené podľa európskych noriem a disponujú certifikátom CE. Stroje série FLC majú automatické čistenie dýz a dvojitý kamerový systém. K dispozícii sú pracovné rozmery 1,5 x 3 m, 2 x 4 m alebo 2 x 6 m. Náš laserový rezací hlava je vybavený automatickým zaostrovaním, aktívnou antikolíznou funkciou a funkciou Auto-View pre detekciu prekážok a automatický pohyb. Rezané hlavy majú automatické chladenie. Mosty použitých v strojoch sú vyrobené z jedného kusu z hliníkovej zliatiny, čo garantuje ich tuhosť a zabraňuje deformáciám pri nárazoch, preťažení či prekrývaní. Oproti mostom zo železných profilov sú 3x ľahšie, vďaka čomu umožňujú vyššiu rýchlosť a zrýchlenie pri nižšom výkone motora. Príslušenstvo v cene: - Vodný chladič - Chladenie rozvádzača - Automatická fokusačná hlava - Nesting-softvér - Dotykové 19'' CNC riadenie - Flycut rezanie - Dýzy a šošovky (štartovací kit) - Zásuvky na nečistoty z dielov - Automatický menič stolov - Automatické čistenie dýz - CE certifikácia - Školenie obsluhy na mieste - Bezdrôtové diaľkové ovládanie - Automatický mazací systém - Dvojitý kamerový systém

Stav: nový, Dĺžka ohybu: 1050 mm Hrúbka plechu: 1,8 mm Priemer hornej valca: 70 mm Technické údaje: - Teleso z liatiny - Ručné alebo (voliteľne) motorizované ohýbanie - Po ohýbaní je možné horný valec vyklopiť pre jednoduché vybratie materiálu - Zariadenie na kužeľové ohýbanie - Ručný pohyb zadného a spodného valca pomocou ručného kolesa - Prenosný ovládací panel - V súlade s normami CE Voliteľné príslušenstvo: - Zadný valec s motorovým pohonom - Digitálny displej na zobrazenie polohy zadného valca - Kryt stroja EURO 274,-- - Kalené valce EURO 392,-- - Premenlivá rýchlosť otáčania Dkodpfx Aod Ab T Refqsn Máme veľa referencií!

Stav: nový, Stand Width: 2000 x 1000 mm Retraction Speed: 150 mm/s Weight Approx.: 35,000 kg Stroke: 800 mm Total Power Requirement: 30 kW Installation Height: 1000 mm Rapid Traverse: 120 mm/s Pressure: 500 bar Work Table: 2500 x 1500 mm Working Speed: 12 mm/s Dimensions (LxWxH): 2500 x 2700 x 5400 mm We also build special presses tailored to your application. DETAILS: 4-Column Hydraulic Press 500 t Capacity: 500 tons (at 250 bar – 510 tons) Control: Automatic via two-hand control with key switch selection 1. Manual operation via control panel as setup mode 2. Automatic single-stroke with two-hand control, without draw cushion Main Cylinder: Ø500 mm Auxiliary Cylinders: 2 pcs. Ø120 x 80 mm (move together with main cylinders) Motor: 37 kW – 50 HP Pump: 100 cc = 150 L/min, REXROTH axial piston pump Cylinder Speed: Forward: 150 mm/s, Retract: 170 mm/s, Pressure phase: 15–8 mm/s Dsdpsd Aca Asfx Afqekn Working Area: 2500 x 1300 mm (table & ram plate with T-slots) (Drawing of T-slot dimensions provided by customer) Distance between Columns: 2000 x 800 mm Installation Height: 1000 mm (max. distance between table & ram plate) Stroke Length: 800 mm (adjustable via linear scale) Columns: Ø180 mm Hydraulic Equipment: Hydraulic tank with control block & valves (completely REXROTH) Oil Tank Volume: 1500 L, Oil Content: 1200 L Forward Valve: 2 pcs. Hydraulic & mechanical ram safety device Pressure regulator via PLC (min. pressure 60 tons) Air cooler Hydraulic accessories mounted on top of the press Auxiliary motors Auxiliary pump Filter: Rexroth Additional valve for spring-loaded release Speed adjustment via touchscreen Hydraulic accessories on top of press Safety railing around hydraulic tank Side access ladder Control Equipment: Controller: SIEMENS S7 1214 Safety PLC: SICK Swiveling control panel Ethernet interface for remote maintenance Two-hand operation (mobile, sufficient cable length for front & rear operation) Main control cabinet 12" Beijer PLC display Light sensors on front & rear – SICK 1000 + 150 mm Linear scale to adjust stroke length (Novatechnik) Soft starter for main motor 8 free inputs & outputs Working area lighting Side windowed safety door with limit switch (400 x 600 mm) Table Height: 1000 mm (floor to top of table) Total Weight: approx. 35,000 kg Overall Dimensions (LxWxH): approx. 2500 (incl. hydraulics) x 2700 x 5400 (incl. railing) Foundation: Absolutely Required Price valid until 30/12/2022!! Training and commissioning are included in the price.

Stav: nový, Dĺžka plechu: 1360 Hrúbka plechu: 3 Štandardné príslušenstvo: - NC riadenie - Programovateľný motorizovaný zadný doraz s pojazdom 750 mm - Osvetlenie tieňovou čiarou - 1 ks dorazové rameno s meracou stupnicou - 2 ks podperné ramená na plechy - 1 ks dodatočné podperné rameno na plechy (pri modeloch 1106-1306-1505) - Ochrana prstov - Guľôčkový stôl (Ball Transfer Table) - Jednoduché nastavenie strihacej medzery z prednej strany - Guľôčkový skrutkový pohon - Počítadlo strihov Dkjdpfjgick Dsx Afqjn - Prenosný nožný spínač s núdzovým vypínačom - Svetelná závora na zadných ochranných zariadeniach

Stav: nový, Sheet length: 3,200 mm Sheet thickness: 6.0 mm Cutting width: 3,200 mm Total power requirement: 7.5 kW Approximate weight: 6,250 kg Dimensions (LxWxH): 4,180 x 2,150 x 2,000 mm Technical Data: Sheet thickness: 6 mm Cutting length: 3,200 mm Cutting angle: 1.30° Backgauge: motorized, 1,000 mm Motor power: 7.5 kW Length: 4,000 mm Width: 1,700 mm Height: 1,800 mm Weight: 6,250 kg Equipment: Swing-beam shear design NC pre-selection control ELGO P 40 T With backgauge and blade gap adjustment from the front via the control unit Motorized backgauge up to 1,000 mm Clearly arranged control panel mounted on a swivel arm Hydraulic hold-downs positioned close to the cutting edge Foot pedal Blade gap adjustment Cutting line illumination Wide support table with ball transfers Flip-up finger guard, 1,000 mm 1 side stop with T-slot 2 sheet support arms with T-slot Dodpfoh Talzex Afqskn Easy blade change and regrinding Adjustable cutting length for efficient operation Bottom blade with 4 usable edges Top blade with 2 usable edges Qualified customer service Operating manual in ENGLISH Machine and equipment in compliance with CE regulations

Stav: nový, Priemer hriadeľa: 480 mm Pracovná rýchlosť: 3–6 m/min Výkon motora: 22 kW Dĺžka: 2500 mm Šírka: 2200 mm Dkedpeh Alh Refx Afqen Výška: 2300 mm Hmotnosť cca: 9300 kg Technické údaje: - Zvarený rám z oceľovej konštrukcie - Poháňané 3 valce - Kalené a brúsené hriadele z vysokopevnostnej špeciálnej ocele - Valce sú kalené a brúsené - Horizontálna pracovná poloha - Kalené štandardné valce - Mobilný ovládací panel - Uhlové bočné vodiace valce - Brzdový motor pre presné ohýbanie - Digitálne displeje (2 kusy) Voliteľné príslušenstvo: - Štandardný digitálny displej - NC jednotka 10 Screen EUR 11 500,--

Stav: nový, Shaft diameter: 50 mm Upper roll diameter: 152 mm Lower roll diameter: 162 mm Dkodpjd Ab H Sofx Afqjn High-performance hydraulics: 8 Working speed: 4.5 m/min Motor power: 1.1 kW Length: 810 mm Width: 950 mm Height: 1500 mm Weight approx.: 500 kg Technical Specifications: - Welded steel frame - All 3 rolls are driven - Hardened shafts made of special steel - Top roll hydraulically adjustable - Horizontal and vertical working positions - Standard rolls - Guide rolls - Brake motor for precision bending - Portable control panel Options: - Digital display EUR 700 - NC unit EUR 7,000 - Angle side guide rolls EUR 1,400 HPK 50 File Type Size Min. Dia Notes 1. 60x10 20x10 600 300 Standard Rolls 2. 100x15 50x10 600 300 Standard Rolls 3. 35x35 15x15 600 300 Standard Rolls 4. Ø 35 Ø 20 600 300 Optional Rolls 5. Ø 70x2 Ø 25x1.5 1200 400 Optional Rolls 6. 2”x2.9 1/2”x2.3 1000 300 Optional Rolls 7. 70x30x3 30x15x2 1500 400 Optional Rolls 8. 50x3 20x2 1600 400 Optional Rolls 9. 50x50x6 30x30x3 600 400 Optional Rolls 10. 50x50x6 30x30x3 900 600 Optional Rolls 11. 60x7 30x4 600 400 Standard Rolls 12. 60x7 30x4 700 400 Standard Rolls 13. 60x7 30x4 700 400 Standard Rolls 14. UPN 80 UPN 30 800 400 Optional Rolls* 15. UPN 80 UPN 30 1200 600 Standard Rolls* * Special washer (spacer) may be required / Only with special beam bending attachment • The capacities are based on 260 N/mm² plate yield strength

Stav: nový, Bending length: 2100 mm Sheet thickness: 8 mm Top roll diameter: 200 mm Technical data: - Rear roll powered - Cone bending device - Hardened and polished rolls - Entire frame made of St 52 steel - Asymmetric design for perfect bending - Top and bottom rolls driven by brake electric motors and planetary gearboxes - Mobile control panel - In compliance with CE standards Options: - Bottom roll powered by electric motor EURO 2,200.– - Digital display for rear roll position EURO 1,010.– - Extended rolls EURO 966.– - Profile rolls EURO 1,190.– Dkjdpfx Ajd Ab Nhofqjn We have many references!

Stav: nový, Bending length: 2050 mm Sheet thickness: 4 mm Top roll diameter: 130 mm Technical data: - Rear roll motor-driven - Cone bending device - Hardened and polished rolls Dsdpfsd Ab Nwsx Afqokn - Entire body made of St 52 steel - Main motor with brake system - Top and bottom rolls driven by electric motor, gearbox, and gear system - Portable control panel - Cast iron body - Rear and lower rolls adjustable manually - In compliance with CE standards Options: - Top roll driven by electric motor: EUR 1,260 - Digital display for rear roll position: EUR 1,010 - Hardened rolls: EUR 1,352 - Special voltage: EUR 480 - Material feeding table - Bottom roll driven by electric motor We have numerous references!