Tecnica Industrial Oswaldo Filizola Ltda.

Rok výroby: 2022, stav: takmer ako nový (použitý), Komora Memmert ICH 750 z roku 2022, w stanie jak nowa. Redpfxjzam H Ae Anusu Urządzenie wystawowe, oferowane z roczną gwarancją na części zamienne. Opis: Zakres regulacji temperatury: -10 do +60 °C Zakres temperatur roboczych: -10°C do +60°C bez nawilżania (nieprzeznaczona do długoterminowego przechowywania poniżej 0°C; podczas długotrwałej pracy może pojawić się oblodzenie szklanych drzwi) +10°C do +60°C przy pracy z wilgotnością i/lub oświetleniem Dokładność nastawy temperatury: 0,1 °C Czujnik temperatury: 2x czujnik Pt100 DIN Klasa A w układzie 4-przewodowym, do wzajemnego monitorowania oraz automatycznego przejęcia funkcji w razie awarii Wilgotność: Zasilanie wodą destylowaną z zewnętrznego zbiornika przy użyciu pompy samozasysającej Nawilżanie: generator pary wodnej Zakres kontroli wilgotności: aktywne nawilżanie i osuszanie powietrza, regulowane w zakresie 10–80% wilgotności względnej, z cyfrowym wyświetlaczem (rozdzielczość 0,1%, dokładność nastawy 0,5%)

Rok výroby: 2021, stav: takmer ako nový (použitý), Komora Memmert ICH 260 z roku 2021, ako nová. Zariadenie po výstavnej ukážke. Ročná záruka na náhradné diely. Popis výrobcu: Teplotný rozsah prevádzky bez vlhkosti: 0 až +60 °C Nastaviteľný teplotný rozsah 0 až +60 °C Teplotný rozsah prevádzky od +10°C do +60°C pri kontrole vlhkosti a/alebo osvetlení Presnosť nastavenia teploty 0,1 °C Teplotný senzor Rodpfx Anjzam Hvjusu 2 senzory Pt100 DIN trieda A, štvorkáblové zapojenie na vzájomnú kontrolu, preberajú funkcie v prípade poruchy Vlhkosť Zásobovanie vodou cez destilovanú vodu z vonkajšej nádrže pomocou samonasávacieho čerpadla Zvlhčovanie zvlhčovanie pomocou generátora horúcej pary Vlhkosť Aktívne zvlhčovanie a odvlhčovanie vzduchu regulovateľné v rozsahu 10–80% relatívnej vlhkosti s digitálnym displejom – rozlíšenie displeja 0,1%, presnosť nastavenia 0,5%

Rok výroby: 2021, stav: veľmi dobrý (použitý), Komora Memmert ICH 260L z roku 2021. Zariadenie s jednoročnou zárukou na náhradné diely. Popis výrobcu: Teplota Rsdpfxjzam Hij Anuou Prevádzkový rozsah teplôt: bez vlhkosti: 0 až +60 °C Nastaviteľný rozsah teplôt: 0 až +60 °C Prevádzkový rozsah teplôt: od +10°C do +60°C pri vlhkosti a/alebo svetle Presnosť nastavenia teploty: 0,1 °C Snímač teploty: 2 snímače Pt100 DIN triedy A v 4-vodičovom zapojení na vzájomné monitorovanie, ktoré v prípade poruchy preberajú funkcie navzájom Vlhkosť Doprava vlhkosti pomocou destilovanej vody z vonkajšej nádrže prostredníctvom samonasávacieho čerpadla Zvlhčovanie pomocou generátora horúcej pary Aktívne zvlhčovanie a odvlhčovanie vzduchu riadené v rozsahu 10-80% relatívnej vlhkosti s digitálnym displejom relatívnej vlhkosti – rozlíšenie displeja 0,1%, presnosť nastavenia 0,5% Svetlo Denné a ultrafialové svetlo je možné programovať individuálne cez regulátor Studené biele svetlo +/- 6 %, pre UV svetlo +/- 10 % Svetelná jednotka pozostáva zo 4 žiariviek so studeným bielym svetlom (štandardné osvetlenie D65, 6500 K) a 2 UV lámp v spektre 320-400 nm.

Rok výroby: 2024, stav: takmer ako nový (použitý), Memmert HPP 1060 eco chamber, year of manufacture: 2024. Ex-demo device with a one-year spare parts warranty. Manufacturer’s description: Temperature setting range Rodpfxszam E Sj Anueu without light, with humidity: +5 to +70 °C Temperature setting range without light, without humidity: 0 to +70 °C Working temperature range without light, with humidity: +5 (at least 20 below ambient temperature) to +70 °C Working temperature range without light, without humidity: 0 (at least 20 below ambient temperature) to +70 °C Temperature setting accuracy 0.1 °C Temperature sensor 2 x Pt100 sensors, DIN Class A, 4-wire circuit for mutual monitoring; override function in case of fault Humidity Humidity setting range: 10 – 90% relative humidity Humidity supply supplied via distilled water from external tank using a self-priming pump Humidification humidification by hot steam generator Dehumidification dehumidification by refrigeration dryer using Peltier technology Humidity control accuracy 0.5% relative humidity

Stav: veľmi dobrý (použitý), Weiss Spray Water Test System Model: SWT 600/800-S Manufacturer: Weiss Umwelttechnik GmbH For sale is a professional spray water test unit manufactured by Weiss Umwelttechnik. The unit is designed for standardized water, spray water, and ingress protection testing according to IPX1, IPX2, IPX3, IPX4, IPX4K, and IPX9K standards. Ideal for industrial, automotive, electronics, quality assurance, development, test laboratories, research, and material testing applications. Operation is via an integrated touch panel. Test procedures can be performed automatically. Unit Details Manufacturer: Weiss Umwelttechnik GmbH Model: SWT 600/800-S Spray Water Test Unit Test Types: - IPX1 - IPX2 - IPX3 - IPX4 - IPX4K - IPX9K Features: - Stainless steel test chamber - Rotating test table - Swivel arm system - Water circulation - Existing test accessories Electrical Data Supply voltage: 3/N/PE AC 400 V ±10% Frequency: 50 Hz Rated power: 17 kW Rated current: 30 A Wiring diagram no.: 82962 CE marking present Water Supply Water inlet: R 3/4" Water outlet: R 1 1/4" Supply pressure: approx. 2 to 6 bar Test pressure IPX9K: adjustable, approx. 80 to 100 bar Technical Data Rsdpfx Anszachceuou Turntable speed: approx. 1 to 5 rpm Swivel speed: approx. 60°/s Permissible ambient temperature: approx. 10°C to 35°C Noise level: approx. 88 dB(A) Heat emission to environment: On average approx. 1 kW Maximum approx. 3.5 kW Equipment - Touch control panel - Stainless steel test chamber - Rotating test table - Swivel arm - Water circulation pump - Nozzle ring / spray ring - High pressure unit - Flow meter - ESD earth bonding point - CE marking - Robust industrial design Dimensions / Weight Test chamber SWT 600/800: approx. 2,350 x 2,400 x 2,650 mm Test chamber without hinges and door lock: approx. 2,350 x 2,400 x 1,850 mm Test chamber weight: approx. 650 kg Dimensions high pressure unit: approx. 850 x 1,200 x 800 mm Weight high pressure unit: approx. 380 kg Total weight: approx. 1,030 kg Documentation - Operating manual - EC declaration of conformity - Quality inspection certificate - Technical documentation as per images Accessories - Nozzle ring / spray ring - Testing and spraying components - Swivel arm accessories - Flow meter - Connecting components - Tools and keys - Documentation and papers Condition Used system from industrial operation. Visual condition as per images. The system can be powered on. Display and control interface are functional and visible. No further technical inspection, calibration, or full functionality test has been performed. Inspection and testing on site possible and recommended by appointment. Scope of delivery - Weiss Umwelttechnik SWT 600/800-S spray water test system - High pressure unit - Rotating table and swivel arm - Testing and spraying accessories as per images - Operating manual and documentation - Accessories as shown in images The table shown in the photos is not included in the scope of delivery. Loading by arrangement possible. Transport and shipping by suitable forwarding agent required. Dimensions, weights, and technical data are partly taken from the documentation. Data may vary. Commercial sale without warranty. Subject to change, errors, and prior sale.

Rok výroby: 2026, stav: takmer ako nový (použitý), Binder KB PRO 130 z 2026, zariadenie ex demo ako nové. 2-ročná záruka na náhradné diely. Redpfjy Urc Hjx Anusu Popis produktu: POPIS PRODUKTU Univerzálny génius medzi termostatickými skriňami: KB PRO je náš najvýkonnejší inkubátor s chladením. Teplotný rozsah od -20°C do +100 °C a rozsiahle programové možnosti umožňujú široké spektrum využitia, ktoré ďaleko presahuje inkubáciu. HLAVNÉ VLASTNOSTI Teplotný rozsah: -20 °C až 100 °C Osvedčená technológia predohrevnej komory APT.line™ Energeticky úsporné chladenie vďaka modernému inverterovému chladiacemu agregátu Chladenie s použitím ekologického chladiva R-290 Vyhrievanie dvier na zabránenie kondenzácie Nastaviteľná rýchlosť ventilátora Odolná konštrukcia plášťa s HIT sendvičovou technológiou Vnútorná komora z nerezovej ocele Vnútorné dvere zo skla bezpečnostného pokrytého kovovým oxidom Dve drôtené police z nerezovej ocele Prístupový port Ø 30 mm so silikónovou zátkou Možnosť stohovania viacerých jednotiek Intuitívny ovládač s dotykovým displejom umožňuje segmentové aj reálne časové programovanie Vnútorný dátový záznamník, merané hodnoty v otvorenom formáte čitateľné cez USB Nezávislá teplotná poistka triedy 3.3 (DIN 12880) s optickým a akustickým alarmom Automatický autotest zariadenia na komplexnú analýzu stavu Konektory na výmenu dát: Ethernet, USB Softvér BINDER Multi Management Software APT-COM™ Basic Edition Voliteľné plynové moduly CO₂: pre rastlinné kultúry (0-1%) a bunkové kultúry (0-20%)

Rok výroby: 2002, stav: použitý, Hans Hoffmann SA-TP/4 Tester nárazov 400V/50Hz; 6,5A Rodsy Ul A Tepfx Anuou Maximálne pracovné zaťaženie: 5000 Joule

Stav: použitý, LDS V790 Shaker System LDS V790-335T Air-Cooled Vibrator + LDS HPA-K CE Amplifier + Control and test accessories Professional electrodynamic vibration testing system Manufacturer: Ling Dynamic Systems Ltd. / LDS Industrial equipment for environmental simulation and vibration testing For sale is a pre-owned LDS V790 vibration test system from industrial commercial use. The system is suitable for vibration tests, oscillation tests, environmental simulation, research & development, quality assurance, electronic testing as well as industrial stress testing. LDS Shaker / Vibrator Manufacturer: Ling Dynamic Systems Ltd. / LDS Product: Air-Cooled Vibrator Model: V790-335T Armature diameter: 335 mm Frequency range: DC to 3000 Hz Resonant frequency: approx. 2250 Hz Max. continuous displacement: 50.8 mm pk-pk Max. velocity: 1.5 m/s Sine force peak: approx. 6.67 kN / 1500 lbf Random force RMS: approx. 6.67 kN / 1500 lbf Half-sine shock force peak: approx. 26.69 kN / 6000 lbf Effective moving mass: approx. 13.08 kg Internal load capacity: approx. 160 kg Compressed air supply required: Load support approx. 5.52 bar / 80 psi Optional air isolation approx. 5.52 bar / 80 psi Rsdpfxoy Uigce Anueu LDS Power Amplifier Manufacturer: Ling Dynamic Systems Ltd. / LDS Product: HPA-K Amplifier Model: HPA K CE Input voltage: 50 Hz: 380 / 400 / 415 / 440 V 60 Hz: 380 / 400 / 415 / 440 / 460 / 480 / 500 V Current factory setting: 400 V Max. connected load: 9.3 kVA Type: HPA-K CE Power Amplifier Matching the LDS V790 Shaker System Weight: approx. 750 kg Control / Accessories According to the images, the system includes among others: LDS amplifier unit / control cabinet Control and rack units PC workstation with monitor, keyboard, and mouse Cables and connection accessories as shown Emergency stop units / safety accessories A functional test under load has not been documented. Inspection and testing on-site by appointment possible and encouraged. Condition Used industrial system. Cosmetic condition as shown in images. Normal signs of use and storage present. Partially scratches, paint chips, dirt, and usage marks visible. The system comes from industrial commercial use. All information given to the best of our knowledge based on the visible nameplates, images, and available documentation. Scope of delivery LDS V790-335T Air-Cooled Vibrator LDS HPA-K CE power amplifier Control / rack units as per images PC workstation as per images Cables and accessories as per images Available documentation / manual Items not explicitly mentioned are not included in the scope of delivery. Delivery exclusively as pictured or by prior arrangement. Transport / Collection Heavy industrial equipment. Transport only via suitable freight forwarding or industrial loading. Collection and loading by prior appointment only. Inspection, testing, and on-site measurement explicitly possible by prior arrangement. Sales information Sale exclusively to commercial customers. Used equipment from industrial use. Sale without warranty, without guarantee, and without returns. Subject to errors, prior sale, and technical changes. All technical data without guarantee. We are happy to answer further questions by message.

Stav: veľmi dobrý (použitý), LDS Dactron COMET USB Shaker Control System Type: COM 200 Manufacturer: Brüel & Kjaer / LDS Dactron For sale is a used LDS Dactron COMET USB Shaker Control System Type COM 200 for controlling electrodynamic vibration test systems. The system is suitable for random, sine, and shock testing in laboratory, industrial, automotive, as well as research and development environments. Manufacturer / Model Manufacturer: LDS Dactron / Brüel & Kjaer Type: COMET USB Model: COM 200 Serial Number: 11303191 Made in U.S.A. Technical Specifications - 2-channel shaker control system - USB interface - Supply voltage: 100 – 240 V - Frequency: 47 – 63 Hz - Current consumption: 0.5 A Suitable for: - Random tests - Swept sine tests - Shock tests - Electrodynamic vibration test systems Software / Features Installed software as per system display: - Shaker Control Version 8.1001 Rjdpfjy Ugrpsx Anusu - Library Version 6.3120 Activated module: - Value Swept Sine Enabled option: - Real Time Data Exchange Connections - USB port - BNC connectors - Power connection - Further connections, see images Calibration Calibration data according to label: - Calibration Date: 2010-09-21 - Due Date: 2011-09-21 The calibration has expired. Recalibration can be carried out by the buyer if required. Condition Used device from industrial application. Visual condition as shown in the images. Normal signs of use and storage present. The device has been powered on. Indicator light and software display are active. No further functional or calibration testing was performed. Scope of delivery - LDS Dactron COMET USB COM 200 controller - Power cable / connection cables as shown - Accessories as shown in the images Scope of delivery as pictured only. Notes Inspection possible by appointment. Loading and shipping by arrangement. Commercial sale without warranty. Subject to changes, errors, and prior sale.

Stav: veľmi dobrý (použitý), Brüel & Kjaer LDS Dactron Laser USB LAS 200 Type: LAS 200 LDS Dactron Vibration Test and Shaker Control System incl. Acer laptop with installed software For sale is a used LDS Dactron LASER USB Shaker Control System, type LAS 200. The system was last used in an industrial vibration testing facility and is suitable for electrodynamic shaker systems, vibration tests, resonance tests, random tests, and shock tests. Manufacturer / Model Manufacturer: LDS Dactron / Brüel & Kjær Type: LASER USB Model: LAS 200 Made in U.S.A. Software / Functions Installed Software: Shaker Control Version 8.1001 Library Version 6.3120 Modules enabled according to the software display: Random Sine on Random Random on Random Swept Sine Resonance Search, Track and Dwell Sine Oscillator Classical Shock Shock Response Spectrum Long Time History Other activated options: Automatic Drive Notching / Limiting Real Time Data Exchange High Frequency Control Amplifier Controller Technical Data 8 active input channels 2 output channels Rodpey T Iv Hsfx Anuju Sampling rate: 96 kHz A/D resolution: 24-bit USB mode: 2.0 Input type: Volt / ICP / TEDS Suitable for electrodynamic vibration test systems and industrial shaker units. Calibration Calibration data (as indicated by the system): Last calibration: 20.09.2023 Due date displayed: 19.09.2024 Dimensions / Weight Controller approx.: 430 x 350 x 90 mm (W x D x H) Controller weight: approx. 6 - 8 kg Scope of Delivery LDS Dactron LASER USB controller Acer laptop with installed software Connection cables / accessories as shown in the pictures Condition Used device from industrial operation. Visual condition, see photos. Normal signs of use and storage present. System starts, software can be opened, and hardware was detected. No further in-depth tests were performed. Notes Sale exclusively to businesses. No guarantee or warranty. Subject to prior sale, errors, and changes. Further questions will be gladly answered by phone or message.

Stav: veľmi dobrý (použitý), Memmert Forced Air Drying Oven / Heating Cabinet Manufacturer: Memmert GmbH + Co. KG Model: UFP 800 For sale is a used Memmert UFP 800, previously utilized in commercial applications. Technical Data Model: UFP 800 Protection class: IP20 Rjdpfxjy T Idwe Anuou Standard: DIN 12880-KI 3.1 Temperature range: up to approx. 250 °C Connection: 3N~ 400 V / 50-60 Hz Power consumption: approx. 4800 W Current consumption: approx. 7 A External dimensions: approx. 1190 x 750 x 1620 mm Internal dimensions: approx. 1040 x 600 x 1200 mm Volume: approx. 749 litres Weight: approx. 170 kg Features Stainless steel interior Forced air operation Digital control system Programmable operation possible Glass observation doors Multiple shelf positions Mobile on castors Condition Used device from commercial operations. For visual condition, please refer to the pictures. Normal signs of use and storage present. Scope of Delivery Memmert UFP 800 heating cabinet Shelves / accessories as shown in the pictures Delivery strictly as pictured. Notes Sale to business customers only. Used item without guarantee or warranty. Subject to prior sale, changes, and errors. We are pleased to answer further questions by phone or message.

Stav: veľmi dobrý (použitý), Type: UF 450plus Air Circulation: Forced convection Temperature Temperature Range: +20 °C to +300 °C Operating Range: At least +10 °C above ambient temperature Setting Accuracy: – Up to 99.9 °C: 0.1 °C – From 100 °C: 0.5 °C Temperature Sensors: 2× Pt100 (DIN Class A, 4-wire) Interior and Capacity Volume: 449 liters Internal Dimensions (W × H × D): 1040 × 720 × 600 mm Maximum Number of Shelves: 8 Load per Shelf: 30 kg Maximum Total Load: 300 kg Chamber: Stainless steel, all-round heating External Dimensions and Weight External Dimensions (W × H × D): approx. 1224 × 1247 × 784 mm Net Weight: approx. 160 kg Gross Weight: approx. 185 kg Redpfxsy T Icte Anuou Electrical Data Voltage: 400 V, 3-phase Power: approx. 5800 W Control and Regulation Control Panel: ControlCOCKPIT TwinDISPLAY Controller: digital PID microprocessor Timer: 1 minute to 99 days Functions: SetpointWAIT, HeatBALANCE, calibration at 3 temperature points Adjustable Parameters: Temperature, fan speed, exhaust air flap, time programs Ventilation Recirculating Air: adjustable in 10% increments Fresh Air: electronically adjustable Exhaust Air: with throttle valve Communication Interfaces: Ethernet, USB Software: AtmoCONTROL Safety Temperature limiter (TB), protection class 1 Temperature monitor / limiter (TWW/TWB) selectable ASF system for over- and undertemperature monitoring Equipment Stainless steel door with 2-point locking Stainless steel housing Low-noise air turbine Rear side has 2 pass-throughs each with approx. 12 cm diameter Condition: used Scope of delivery: (see pictures) (Technical data subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Stav: veľmi dobrý (použitý), Rok výroby: 2014, Funkcionalita: nefunkčný, Röntgenový stroj Ishida model IX-G2-4027-H so systémom odmietnutia, rok výroby 2014. Rodpfx Ajy Tl Eronusu

Stav: veľmi dobrý (použitý), LDS Vibration Test System / Shaker System Type: V8-440 HBT750C Combo + SPA56K v3 Manufacturer: LDS Test & Measurement / IMV For sale is a complete electrodynamic vibration test system, comprising LDS shaker system, SPA56K v3 power amplifier, matching transformer PT65.0/3E, hydraulic power unit, and IMV K2+ vibration control system. Suitable for vibration testing, shock testing, endurance testing, environmental simulation, automotive, aerospace, electronics testing, R&D, and industrial quality assurance. Shaker / Vibrator Manufacturer: LDS Test & Measurement Type: V8-440 HBT 750 COMBO Serial number: 1324-000010 Year of manufacture: 2007 Air-cooled electrodynamic shaker. Sine force peak: 57.8 kN Random force peak: 60 kN Shock force peak: 264 kN Frequency range: 5 – 2500 Hz Armature diameter: approx. 440 mm Air bearing and vibration-isolated heavy-duty system. Slip Table / Horizontal Table Type: HBT750C XX4 Clamping area: 750 x 750 mm 2 hydraulic bearings included. Max. pitch moment: 32.17 kNm Max. roll moment: 34.00 kNm Max. yaw moment: 24.69 kNm Thread pitch: 100 mm Thread inserts: M10 Power Amplifier Manufacturer: LDS Test & Measurement Type: SPA56K v3 Serial number: 1004913/1 Professional high-power switching amplifier. Supply voltage: 50 Hz: 380 / 400 / 415 / 440 V 60 Hz: 380 / 400 / 415 / 440 / 460 / 480 / 500 / 520 V Current setting: 415 V Rjdpfx Aoy S U Hienueu Max. connection power: 86.9 kVA Matching Transformer Manufacturer: LDS / Romarsh Ltd. Type: PT65.0/3E Serial number: 07001 Power: 56 kVA Input voltage range: 0 – 100 V AC Frequency range: 5 – 2500 Hz Controller IMV K2+ Vibration Control System Multi-channel vibration controller, including software, data carrier, license dongle, and documentation. Supported features according to documentation: - Sine - Resonance search - Random - Shock - Sine-On-Random - Random-On-Random - Shock Response Spectrum - Notching / Limiting Equipment Complete vibration and shock test system HBT750C slip table included Hydraulic system included Matching transformer included Software package included Documentation included Dimensions / Weight Large industrial unit / heavy-duty system Shaker weight: approx. 2,000 – 2,500 kg Power amplifier weight: approx. 800 – 1,200 kg Matching transformer weight: approx. 500 kg Total weight of the complete system: approx. 4,000 – 6,000 kg Transport exclusively via suitable heavy-load shipping company. Dimensions, weights, and technical data are partly estimated or not fully known. Condition Used system from industrial application. Cosmetic condition as shown in pictures. On-site inspection and testing possible by arrangement. Scope of delivery - LDS V8-440 HBT750C Combo shaker - LDS SPA56K v3 power amplifier - Matching transformer PT65.0/3E - Hydraulic power unit - HBT750C slip table - IMV K2+ control system - Software / data carriers / license dongle - Documentation and accessories as shown in pictures Loading possible by arrangement. Commercial sale without warranty. Subject to changes, errors, and prior sale.

Stav: dobrý (použitý), UNHOLTZ-DICKIE / HS-Simulatoren Vibration Test System Type: TA117SA-560 + HS 520 K 60 V Manufacturer: UNHOLTZ-DICKIE Corporation / HS-Simulatoren Horstmann GmbH For sale is a complete electrodynamic vibration test system consisting of UNHOLTZ-DICKIE shaker system, SALL50F power amplifier, VWIN II control system, and HS-Simulatoren climatic test chamber. Ideal for combined vibration and environmental testing in industry, automotive, aerospace, electronics testing as well as research and development. The overhead crane and other hall equipment visible in the photos are not included in the scope of delivery. Shaker / Vibrator Manufacturer: UNHOLTZ-DICKIE Corporation Type: 560 System: TA117SA-560 Serial number: 259 Air-cooled electrodynamic shaker Sine force: 6000 lbf peak / 26.7 kN peak Random force: 5200 lbf RMS / 23.1 kN RMS Max. Acceleration, bare table: 100 g / 981 m/s² Shaker stroke: 1 inch / 25.4 mm Axial resonant frequency: approx. 2200 Hz / approx. 2.2 kHz Armature effective weight: 45 lb / approx. 20.4 kg Driver coil: 200 A sine 140 A random Air-cooled and vibration-isolated system. Power Amplifier Manufacturer: UNHOLTZ-DICKIE Corporation Type: SALL50F Power Amplifier Serial number: 4414 Power module: PML-50-S Master controller: MCLL50 Supply voltage: 400 V / 3 phase / 50 Hz Power consumption: 41 kVA / 60 A Blower: 15 kVA / 22 A Maximum driver currents: 440 A RMS out sine 300 A RMS out random Forced air cooling / air-cooled. Control UNHOLTZ-DICKIE VWIN II DSP vibration control system, incl. industrial PC / monitor as shown in the images Control console: MA117SA-560 Serial number: 1838 Charge amplifier: Type 122P Serial number: 8963 Supported test modes: Random vibration Sine vibration Resonance dwell Classical shock pulse SRS shock & analysis Sine-on-random Random-on-random Gunfire Interfaces: TCP/IP RS232 Ethernet USB HS-Simulatoren Climatic Test Chamber Manufacturer: HS-Simulatoren Horstmann GmbH Type: HS 520 K 60 V Temperature range: -60 °C to +180 °C Electrical data: 380 V 17 A 10 kW Refrigerants: R13 R502 Features Combined environmental and vibration testing Complete electrodynamic test system DSP-based real-time control Forced air cooling system Fully wired test system Original documentation available: Operating manual Maintenance manual System specifications System diagrams Performance curves Dimensions / Weight Amplifier: approx. 1000 x 537 x 825 mm Climatic test chamber: approx. 1200 x 1800 x 2000 mm Total weight estimated: approx. 2500 – 4000 kg Transport only by suitable heavy-load forwarding agent. Technical data partly estimated. Data may vary. Condition Used system from industrial application. Cosmetic condition as per photos. Functionality not fully tested. Inspection by prior arrangement is possible and encouraged. Scope of delivery UNHOLTZ-DICKIE shaker model 560 SALL50F power amplifier Control console / regulation system Rsdpfxey S S Eio Anueu VWIN II controller system Charge amplifier HS-Simulatoren climatic test chamber HS 520 K 60 V Industrial PC / monitor as per images Documentation and accessories as per images Loading by arrangement possible. Commercial sale without warranty. Errors and prior sale excepted.

Stav: veľmi dobrý (použitý), LDS / CTS Vibration Test System Type: V850-440 LPT 750C + CTS CV-70/1100-5 Manufacturer: LDS / CTS / IMV For sale is a complete electrodynamic vibration testing system consisting of an LDS shaker system, LDS SPA30KCE power amplifier, IMV K2+ vibration controller, and CTS climate chamber. Suitable for combined vibration and climatic testing in automotive, aerospace, electronics testing, R&D, materials testing, as well as industrial quality assurance. The blue overhead crane / gantry crane shown in the pictures is not included in the scope of supply. Shaker Manufacturer: Ling Dynamic Systems Ltd. (LDS) Type: V850-440 LPT 750C Air-cooled electrodynamic shaker. Armature diameter: 440 mm Frequency range: DC – 3000 Hz Resonance frequency: approx. 2200 Hz Sine force: approx. 22.2 kN peak Random force: approx. 22.2 kN RMS Shock force: approx. 66.7 kN peak Max. velocity: 2.0 m/s Displacement: 50.8 mm pk-pk Internal load capacity: approx. 350 kg Compressed air supply required: Load support: approx. 5.5 bar Air isolation: approx. 6.9 bar Shaker weight: approx. 1,300 kg Power Amplifier Manufacturer: LDS Type: SPA30KCE Class-D high-performance switching amplifier. Supply voltage: 50 Hz: 380 / 400 / 415 / 440 V 60 Hz: 380 / 400 / 415 / 440 / 460 / 480 / 500 / 520 V Currently set to: 400 V Max. power input: 38.14 kVA Max. output power: 21.0 kW Output voltage: 100 V RMS Amplifier weight: approx. 550 kg Control Unit IMV K2+ Vibration Control System Multichannel vibration control including Dell Precision PC system. Functions: - Sine - Resonance Dwell - Limit Control - Random - Sine-on-Random - PSD Limit Control - Shock - Scheduler - System Monitor CTS Climate Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: CV-70/1100-5 Year of manufacture: 10/2019 Temperature range: -70 °C to +180 °C Redpfey Sy Npex Anusu Humidity range: 10 % to 95 % RH Nominal voltage: 400 V / 3/N / 50 Hz Power: 15.9 kW Refrigerants: - R452A: 6.8 kg - R23: 2.1 kg Equipment - Combined climatic and vibration testing - Slip table / mounting table included - Fully pre-wired test system - Service and maintenance documentation available Slip Table: Fixture surface: approx. 760 x 850 mm Threaded bushing spacing: approx. 100 mm Dimensions / Weight Large industrial system / heavy-duty system. Total system weight: approx. 6,000 – 7,000 kg Transport only possible via suitable heavy-duty forwarding agent. Dimensions, weights, and technical data are partially estimated and not fully known. Condition Used industrial equipment from industrial use. Visual condition as shown in the pictures. Viewing and testing on site possible by appointment. Scope of Delivery - LDS V850-440 LPT 750C shaker system - LDS SPA30KCE power amplifier - IMV K2+ vibration control - Dell Precision PC system - CTS climate chamber CV-70/1100-5 - Slip table / mounting table - Accessories and documentation as shown in the pictures Not included in the scope of delivery: Blue overhead crane / gantry crane. Loading upon arrangement possible. Commercial sale without warranty. Subject to change, error, and prior sale.

Rok výroby: 2025, stav: takmer ako nový (použitý), Klimatická komora Binder MKF 720 E5 z roku 2025. Komora je nepoužitá, nová, so zárukou 3 roky na náhradné diely. Rodjy Sg Nvepfx Anuou Binder MKF 720 E5 je profesionálna klimatická/ environmentálna komora určená na testovanie stability, teplotné a klimatické testy v súlade s normami DIN a IEC. Rad E5 patrí k novej generácii zariadení Binder s dotykovou obrazovkou a rozšíreným programovým riadením. Hlavné vlastnosti: * Teplotný rozsah: -40 °C až +180 °C * Rozsah vlhkosti: 10–98 % RH * Objem komory: cca 734 litrov * Technológia predohrevnej komory APT.line™ * Veľmi rýchle zmeny teplôt * Riadenie vlhkosti kapacitným snímačom + parné zvlhčovanie * Dotykový ovládač Binder E5 s možnosťou segmentového a časového programovania * Zabudovaný záznamník dát + export dát cez USB * Ethernet rozhranie * Vyhrievané kontrolné okno s LED osvetlením * Automatické riadenie vody a odtoku * Vnútorná komora z nehrdzavejúcej ocele * Kompresorové chladenie * Chladiace médium: R-452A

Stav: takmer ako nový (použitý), Rok výroby: 2025, Zariadenie z roku 2025 ako nové. Dvojročná záruka na náhradné diely. Binder KB 240 E6 je profesionálny chladený laboratórny inkubátor s kompresorovou chladiacou jednotkou, určený na pestovanie mikroorganizmov, testy stability, materiálové testy a skladovanie vzoriek pri kontrolovanej teplote. Model E6 s chladiacim médiom R-134a patrí medzi najviac oceňované generácie série KB vďaka veľmi dobrej chladiacej výkonnosti a širokému rozsahu teplôt. Hlavné vlastnosti * Teplotný rozsah: -10°C až +100°C * Objem komory: približne 247 litrov * Kompresorové chladenie * Ovládač BINDER E6 s časovým programovaním * Technológia APT.line™ zabezpečujúca rovnomerné rozloženie teploty * Vnútorné dvere z tvrdeného skla * Komora z nehrdzavejúcej ocele * Prístupový port Ø30 mm * Rozhranie RS422 / možnosť integrácie s APT-COM™ Použitie * inkubácia mikroorganizmov * biologické a farmaceutické výskumy Rsdpfx Aney R Tz Aouou * testy stability * skladovanie vzoriek * materiálové skúšky * teplotné simulácie Technické údaje * Objem: cca 247 l * Maximálna teplota: 100°C * Napájanie: 200–230 V * Výkon: cca 1,2 kW Výhody série KB E6 * veľmi dobrá stabilita teploty * účinné chladenie pod úroveň okolitej teploty * vysoká spoľahlivosť * energeticky úspornejší než staršie generácie * možnosť nepretržitej prevádzky v laboratóriu * obľúbený model vo farmaceutických a mikrobiologických laboratóriách

Stav: dobrý (použitý), Binder FED 400 Drying Oven Drying Oven / Laboratory Oven / Heat Chamber Industrial-grade model with forced convection Manufacturer: Binder GmbH Model: FED 400 Version: Heat chamber with forced convection For sale is a pre-owned Binder FED 400 drying oven from an industrial site clearance. This oven is suitable for laboratory, research, development, quality assurance, material testing, and industrial applications. The unit features electronic temperature control, forced convection, and a stainless steel interior in a robust industrial-grade construction. Technical data (as per nameplate/manufacturer specifications): Manufacturer: Binder GmbH Model: FED 400 Version: E2 Serial No.: 15-21306 Made in Germany Electrical Data: Operating voltage: 400 V Frequency: 50 / 60 Hz Supply type: 3 N~ Rated power: 3.40 kW Current consumption: 7.4 A Protection class: IP20 Temperature Data: Temperature range: up to 300 °C Forced convection Safety device according to DIN 12880 Class 2.0 External dimensions approx.: Width: 1235 mm Height: 1025 mm Depth: 765 mm Chamber dimensions approx.: Width: 1000 mm Rjdpsy R Axqsfx Anueu Height: 800 mm Depth: 500 mm Chamber volume: approx. 400 liters Weight (according to manufacturer): Approx. 145 kg Equipment: Binder FED 400 drying oven Forced convection Digital temperature control Electronic control system Stainless steel inner chamber Double-wing doors Removable shelf grids Exhaust port on the rear Industrial and laboratory model Condition: Used equipment with standard signs of age and use. Visual condition, see photos. The unit was taken from an operational environment. Scope of delivery: Binder FED 400 drying oven Shelf grids Scope of delivery as shown Notes: Inspection possible by appointment only. Actual technical data, dimensions, weights, and features may differ. No guarantee for accuracy of information. Subject to prior sale. Commercial sale – sold without warranty.

Stav: použitý, Funkcionalita: neoverené, Kompletné laboratórium na kontrolu kovov a skúšanie materiálov Priemyselné QS/skúšobné laboratórium ako komplet Redpfx Aney Rglnousu Na predaj je kompletné profesionálne laboratórium na kontrolu a skúšanie kovov pochádzajúce z priemyselného oddelenia kvality (QS). Obsah zahŕňa okrem iného OES analýzu kovov, univerzálny skúšobný stroj, technickú čistotu podľa VDA 19 / ISO 16232, metalografické vybavenie, testovanie tvrdosti, meranie hrúbky povlakov, laboratórne váhy, analýzu vody, laboratórne zariadenia, rozsiahle laboratórne vybavenie Köttermann a spotrebný materiál. Výrobcovia zahŕňajú napr.: AMETEK/SPECTRO, GALDABINI, JOMESA, Struers, Fischer, List, Ernst, Zeiss, KERN, Mettler, IKA, Memmert, Macherey-Nagel, Hanna, WTW a Köttermann. Hlavné zariadenia AMETEK / SPECTRO SPECTROTEST TXC02 UV – mobilný OES analyzátor kovov GALDABINI QUASAR 100 – univerzálny skúšobný stroj / ťahová skúška 100 kN JOMESA systém na analýzu filtrov pre technickú čistotu podľa VDA 19 / ISO 16232 Struers TransPol-5 – mobilný systém na brúsenie a leštenie pre metalografiu Struers Rotopol-2 – metalografický brúsiaci a leštiaci stroj Fischer DELTASCOPE FMP30 – systém na meranie hrúbky vrstvy List-Magnetik MEGA-CHECK Master – zariadenie na meranie hrúbky vrstvy Ernst Computest SC – mobilný systém na skúšanie tvrdosti Carl Zeiss Jena Neophot – metalografický svetelný mikroskop Köttermann – digestory, laboratórne zostavy, skrine na nebezpečné látky a chemikálie Rozsiahly spotrebný laboratórny materiál, laboratórne sklo a príslušenstvo Kompletný opis objektu je v dokumentácii.

Stav: dobrý (použitý), KÖHLER Corrosion Test Chamber HK-400 Manufacturer: KÖHLER Type: assumed HK-400 Controller: ADWEST KÖHLER PC102 Designation: SSK_Köhler_0400-01 PN: 1356 For sale is a KÖHLER corrosion test chamber for salt spray, condensation, and corrosion tests in industrial, research, development, and quality assurance applications. The unit is suitable for testing components, coatings, metal parts, and technical assemblies under corrosive environmental conditions. Visually, the system corresponds to a KÖHLER HK-400 version for salt spray and condensation tests. Technical data: Test chamber volume: approx. 400 liters Internal dimensions: approx. 1020 × 750 × 500 mm External dimensions: approx. 1970 × 1050 × 600 mm Temperature range: ambient +10°C to approx. +55°C Voltage: 220 V / 50 Hz Equipment/features: ADWEST KÖHLER PC102 controller Digital display unit Stainless steel test chamber Viewing window in the door Multiple test grids/shelves Integrated pressure gauges Connections for test media supply Industrial-grade design Possible test procedures: Salt spray testing Condensation water testing Kesternich corrosion testing Corrosion testing on coatings and metal parts Automotive and industrial testing Condition: Used device with age- and use-related signs of wear. Visual condition as shown in the images. Important note: The original manufacturer’s nameplate was not present on the system. The technical data was determined based on available markings, images, and comparable KÖHLER HK-400 manufacturer information. Scope of delivery: System as depicted Scope of supply as per images Miscellaneous: Inspection by appointment possible. Loading can be arranged. Commercial sale – sold without warranty. (Subject to change and errors excepted) Rjdpfx Anjy N R Tajueu

Stav: dobrý (použitý), ESPEC klimatická testovacia komora PL-3KPH Výrobca: ESPEC Corp. Typ: PL-3KPH Vyhotovenie: vzduchom chladená teplotná a klimatická testovacia komora Na predaj ponúkame použitú klimatickú testovaciu komoru ESPEC určenú na teplotné a klimatické skúšky vo výskume, vývoji, v oblasti kontroly kvality a v priemysle. Technické údaje: Objem testovacieho priestoru: cca 400 litrov Teplotný rozsah: cca -40 °C až +180 °C Rozsah vlhkosti: cca 20 % až 98 % r. v. Vnútorné rozmery (Š x V x H): cca 600 × 850 × 800 mm Vonkajšie rozmery (Š x V x H): cca 1010 × 1690 × 1195 mm Elektrické pripojenie: AC 400 V / 3~ / 50 Hz Max. odber prúdu: cca 11 A Hmotnosť: cca 350 kg Chladenie: vzduchom chladené Nie je potrebné žiadne externé pripojenie vody Chladivo podľa označenia: R452A – cca 1,2 kg Výbava: Ovládanie pomocou dotykovej obrazovky Programová a konštantná prevádzka Teplotná a vlhkostná prevádzka Pozorovacie okienko vo dverách Nerezový testovací priestor Rjdpfxjy N Awqe Anusu Vnútorné osvetlenie / lampa v komore Bočný prievlak na káble/rúrky Ø cca 100 mm Ochrana proti prehriatiu (Overheat Protector) Integrovaný počítadlo hodín RS-232C rozhranie Systém vodnej nádrže Riadenie napájania vzorky (Specimen Power Supply Control) Pripojenie pre časový signál Stav: Použité zariadenie s typickými známkami veku a používania. V dolnej časti krytu sa miestami vyskytuje hrdza a korózia. Vnútorný priestor so stopami používania. Optický stav viď fotodokumentácia. Obsah dodávky: ESPEC klimatická testovacia komora PL-3KPH Vložená polica k dispozícii Obsah dodávky podľa obrázkov Servis: Funkčná kontrola a výmena potrebných komponentov Nové naplnenie zákonom predpísaným chladivom v prípade potreby Tlaková skúška s certifikátom Dokumentovaný skúšobný beh Poznámky: Prehliadka možná po dohode. Nakládku je možné zabezpečiť. Predaj pre firmy – predaj bez záruky. Vyhradzujeme si právo na zmeny a chyby.

Stav: dobrý (použitý), Feutron Temperature Test Chamber -40 to +100°C The Feutron TPK 3403/125 is a true workhorse for standardized temperature tests due to its robust construction. Main fields of application for this model: 1. Electronics and component testing This is the most common use. The main focus is on how components react to extreme temperatures: Function testing: Does the circuit board continue to operate reliably at -40°C or +150°C? Burn-in tests: Artificial aging of components by operating for extended periods at high temperatures to provoke early failures. 2. Material testing Examination of physical changes in materials: Brittleness: Do plastics or rubber seals become brittle in the cold? Deformation: Do composite materials warp at high temperatures? Storage tests: How stable are chemicals or adhesives over long periods at constant temperature? Redpfx Ajy Nynaenueu 3. Quality assurance (QA) Random sample testing: Ongoing checks during series production to ensure compliance with specified temperature ranges. Standardized testing: Performing tests according to industry standards (e.g. DIN EN 60068), which specify certain temperature profiles. 4. Research & Development Prototyping: Testing new enclosure shapes or materials under controlled thermal conditions before series production. Manufacturer: Feutron Model: TPK 3403/125 Temperature range: -40 to +100°C Refrigeration system: Air-cooled condenser Temperature stability: approx. ±0.1 to ±0.5 K Usable chamber volume: approx. 125 liters Refrigerant: R22 Operating overpressure: 23 bar Power supply: 220/280V-3-50Hz Circuit protection: 25 A Protection class: IP 20 Weight: 480 kg “All from a single source: We are happy to offer you suitable bank financing for your project.” komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Stav: veľmi dobrý (použitý), Binder Temperature Test Chamber Model: MK240-400V Manufacturer: Binder For sale is a Binder temperature test chamber MK 240, ideal for professional heat and cold testing in industry, research, development, and quality assurance. The temperature test chambers of the Binder MK series are especially suitable for cyclic temperature tests and reproducible testing under defined environmental conditions. This test chamber enables temperature tests in the range of -40 °C to +180 °C and offers an efficient alternative to custom-made solutions. Technical Data: Temperature Range: -40 °C to +180 °C Interior Volume: approx. 228 liters Temperature Performance Data: - Spatial temperature deviation: 0.1 to 1.2 ± K (depending on setpoint) - Temporal temperature deviation: 0.1 to 0.5 ± K (depending on setpoint) - Heating rate: approx. 5.0 K/min - Cooling rate: approx. 4.5 K/min - Cooling down from +180 °C to -40 °C: approx. 110 minutes Test Chamber: Interior Dimensions: approx. 735 x 700 x 443 mm (W x H x D) Dimensions: External Dimensions: approx. 1115 x 1710 x 925 mm (W x H x D) Load Capacity: Max. load per shelf: approx. 30 kg Max. total load: approx. 70 kg Features: - 2 x access ports Ø 70 mm - 1 door Redey Nic Hjpfx Anusu - 2 shelves standard / max. 6 shelves possible Electrical Data: Rated voltage: 400 V Mains frequency: 50 Hz Power rating: approx. 4.0 kW Fuse: 16 A Phases: 3~ Weight: approx. 320 kg For your safety as a buyer: The following procedures are performed on all offered chambers in advance: 1. Functional inspection and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subject to a documented test run. Condition: Used Scope of delivery: Scope of delivery as per pictures Inspection possible by appointment. Loading can be organized. Sale without warranty. (Specifications subject to change and errors excepted)

Stav: veľmi dobrý (použitý), Binder Temperature Test Chamber Model: MK240-400V Manufacturer: Binder For sale is a Binder MK 240 temperature test chamber, ideal for professional heat and cold testing in industrial applications, research, development, and quality assurance. The Binder MK series temperature test chambers are especially suited for cyclical temperature tests and reproducible testing under defined ambient conditions. This chamber enables temperature testing in the range of -40 °C to +180 °C, offering an efficient alternative to customized solutions. Technical Data: Temperature range: -40 °C to +180 °C Test chamber volume: approx. 228 liters Temperature performance data: Spatial temperature deviation: 0.1 to 1.2 ± K Temporal temperature deviation: 0.1 to 0.5 ± K Heating rate: approx. 5.0 K/min Cooling rate: approx. 4.5 K/min Cooling time from +180 °C to -40 °C: approx. 110 minutes Test chamber dimensions: Interior dimensions: approx. 735 x 700 x 443 mm (W x H x D) Exterior dimensions: approx. 1115 x 1710 x 925 mm (W x H x D) Load capacity: Max. load per shelf: approx. 30 kg Max. total load: approx. 70 kg Features: 2 x access ports Ø 70 mm 1 door 2 standard shelves / up to a maximum of 6 shelves possible Electrical data: Rated voltage: 400 V Network frequency: 50 Hz Rated power: approx. 4.0 kW Fuse protection: 16 A Phases: 3~ Weight: Approx. 320 kg Condition: Used Scope of delivery: Scope of delivery as depicted in the photographs Redpfx Asy Nicmonusu Inspection possible by appointment. Loading can be arranged. Sale without warranty. (Specifications subject to change and errors excepted)