Alexander Müller Feinblechverarbeitung

Rok výroby: 2025, stav: nový, New machine Year of manufacture: 2025 Equipment and technical data: Supplied in standard configuration with: Robust, torsion-resistant steel frame in welded and bolted construction Lamellar pressing beam TOP with 6 elements, lamellar pressing beam SIDE with 5 elements Lamellar pressing beam with proven tolerance compensation (Ganner system) for tightly bonded carcass connections Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates Continuous pressing surface with a height of 95 mm at the lower vertical pressing beam Electromotive adjustment of both pressing beams via precision trapezoidal threaded spindles (with increased lead and running accuracy) and high-performance running nuts with grease reservoir Pressing is performed electromotively, via 2 separate worm gear motors (2 x 0.75 kW) The pressing force of the pressing beams is infinitely electronically adjustable by 2 potentiometers and controlled by frequency inverters, making the pressing force control absolutely wear-free Pressing force for horizontal pressing beam: min. 500 daN (kg), steplessly adjustable up to max. 2200 daN (kg) Pressing force for vertical pressing beam: min. 300 daN (kg), steplessly adjustable up to max. 2200 daN (kg) Pressing and positioning speed of the pressing beams with fine positioning via 3-stage selector switch: 5 / 10 / 25 mm/sec Jog mode for precise positioning of both pressing beams, e.g. for low pressing forces, drawers, and 45° carcasses Very simple operation using 6 separate push buttons, 8 movement sequences selectable via control unit Freely adjustable pressing time preselection 0-30 min (switchable to seconds or hours) with individually programmable opening dimensions for both pressing beams Post-pressing function to increase or reduce pressing force during the pressing process Working/feeding height: 300 mm Working dimensions: Length min: 150 mm, max: 2500 mm Height min: 150 mm, max: 1400 mm Depth: 700 mm Bsdpow Nafksfx Agvjwu Including surcharge for rapid traverse speed for fast positioning of the pressing beams, controlled via automatic workpiece detection with sensors in the pressing beams, pressing speed 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, sensors can be switched off for pressing of special components Including set of machine feet for working height of 500 mm Location: Flörsheim Availability: Short notice

Rok výroby: 2025, stav: nový, New machine Year of manufacture: 2025 Bwsdewx Aadjpfx Agvou Features and technical data: Standard equipment: - Robust machine base - Dowel system for: dowel diameter 8 mm, dowel length 35 mm (factory setting, adjustable from 30 to 40 mm), dowel projection 12 mm (factory setting, adjustable from 7 to 20 mm) - Recoil-free insertion gun - Vibratory feeder for dowel feed - Dowel diameter and length monitoring with Auto-DL-Selekt system - Water supply system for pre-glued dowels Stainless steel water tank (7.5 l) Closed water system with 6 bar water pressure and spray nozzle - Electronic control unit with: Main switch On/Off Program selector switch Water / Water+injection Potentiometer for dowel feeding via vibratory feeder Potentiometer for dosing the water injection quantity Indicator lamp to show minimum water level in tank - Mobility kit / chassis - Pneumatic: 6 bar / Electrical: 230V, 1Ph, 50Hz HoKuTech DübelJet with option for counter-hole processing: 1 piece HoKuTech | DübelJet incl. retrofit kit for LeimJet including all components for integration/connection with the DübelJet including height-adjustable suspension for glue hose including: 1 HoKuTech | LeimJet Glue dosing device for counter-hole processing Accepts PVAc glues up to 75,000 mPas viscosity Incl. dowel nozzle for Ø 8 mm, pointed nozzle Location: Flörsheim Availability: Immediately

Rok výroby: 2016, stav: použitý, Rôzne hliníkové píly na sklade Bodpfof Rihvex Agvjwu