İmamoğlu Soğutma Cihazları San. Tic. ve Ltd. Şti. (Fabrika)

Rok výroby: 2025, stav: nový, New machine Year of manufacture: 2025 Equipment and technical data: Supplied in standard configuration with: Robust, torsion-resistant steel frame in welded and bolted construction Lamellar pressing beam TOP with 6 elements, lamellar pressing beam SIDE with 5 elements Lamellar pressing beam with proven tolerance compensation (Ganner system) for tightly bonded carcass connections Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates Continuous pressing surface with a height of 95 mm at the lower vertical pressing beam Electromotive adjustment of both pressing beams via precision trapezoidal threaded spindles (with increased lead and running accuracy) and high-performance running nuts with grease reservoir Pressing is performed electromotively, via 2 separate worm gear motors (2 x 0.75 kW) The pressing force of the pressing beams is infinitely electronically adjustable by 2 potentiometers and controlled by frequency inverters, making the pressing force control absolutely wear-free Pressing force for horizontal pressing beam: min. 500 daN (kg), steplessly adjustable up to max. 2200 daN (kg) Pressing force for vertical pressing beam: min. 300 daN (kg), steplessly adjustable up to max. 2200 daN (kg) Pressing and positioning speed of the pressing beams with fine positioning via 3-stage selector switch: 5 / 10 / 25 mm/sec Jog mode for precise positioning of both pressing beams, e.g. for low pressing forces, drawers, and 45° carcasses Very simple operation using 6 separate push buttons, 8 movement sequences selectable via control unit Freely adjustable pressing time preselection 0-30 min (switchable to seconds or hours) with individually programmable opening dimensions for both pressing beams Post-pressing function to increase or reduce pressing force during the pressing process Working/feeding height: 300 mm Working dimensions: Length min: 150 mm, max: 2500 mm Height min: 150 mm, max: 1400 mm Depth: 700 mm Including surcharge for rapid traverse speed for fast positioning of the pressing beams, controlled via automatic workpiece detection with sensors in the pressing beams, pressing speed 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, sensors can be switched off for pressing of special components Hedpfx Ajw Nafksb Dsw Including set of machine feet for working height of 500 mm Location: Flörsheim Availability: Short notice

Rok výroby: 2025, stav: nový, New machine Year of manufacture: 2025 Features and technical data: Standard equipment: - Robust machine base - Dowel system for: dowel diameter 8 mm, dowel length 35 mm (factory setting, adjustable from 30 to 40 mm), dowel projection 12 mm (factory setting, adjustable from 7 to 20 mm) - Recoil-free insertion gun - Vibratory feeder for dowel feed - Dowel diameter and length monitoring with Auto-DL-Selekt system - Water supply system for pre-glued dowels Stainless steel water tank (7.5 l) Closed water system with 6 bar water pressure and spray nozzle - Electronic control unit with: Main switch On/Off Program selector switch Water / Water+injection Potentiometer for dowel feeding via vibratory feeder Potentiometer for dosing the water injection quantity Indicator lamp to show minimum water level in tank - Mobility kit / chassis - Pneumatic: 6 bar / Electrical: 230V, 1Ph, 50Hz HoKuTech DübelJet with option for counter-hole processing: 1 piece HoKuTech | DübelJet incl. retrofit kit for LeimJet including all components for integration/connection with the DübelJet including height-adjustable suspension for glue hose including: 1 HoKuTech | LeimJet Glue dosing device for counter-hole processing Accepts PVAc glues up to 75,000 mPas viscosity Incl. dowel nozzle for Ø 8 mm, pointed nozzle Location: Flörsheim Availability: Immediately Hjdpfx Aewx Aadjb Dew

Rok výroby: 2016, stav: použitý, Rôzne hliníkové píly na sklade Hedpfx Asf Rihvob Dsw