Snoeck-co

Stav: dielensky repasované (použité), Rok výroby: 2024, celková šírka: 3 600 mm, celková výška: 2 500 mm, pracovná šírka: 1 300 mm, šírka brúsenia: 1 300 mm, Širokopásové brúsky ŠIROKOPÁSOVÁ BRÚSKA a KALIBRAČNÝ STROJ Technické detaily: Pracovná šírka: 1300 mm Ljdexllbbspfx Agusah Hrúbka obrobku max.: 150 - . 4,0 mm Rozmery brúsneho pásu: obeh mm Rozmery stroja DxŠxV: 4,8 x 2,7 x 2,35 m Pohon 219 kW Rok výroby 1992/2004 Na spracovanie dreva! Ďalšie vlastnosti: - pneumatické vedenie pásu - nastavenie výšky ručným kolesom - núdzový vypínač - nastavenie brúsneho valca - napínač pásu - valčekové dráhy (vstup aj výstup dĺžka: 2800 x šírka: 1700 mm, každá so 6 valčekmi) motoricky poháňané - obsluha cez ovládací panel - min./max. hrúbka obrobku: 4,0/150 mm - šírka brúsneho pásu 1300 mm (obeh pásu) - plocha pre brúsny pás Dĺžka x Šírka: 1700/1350 mm Stroj bol repasovaný a je plne funkčný! Kompletne s valčekovým dopravníkom...

Stav: použitý, Rok výroby: 1996, Funkcionalita: plne funkčný, Výbava: Označovanie CE, Brúska s pracovnou šírkou 1300 mm. Vo veľmi dobrom stave. Ledpfx Agowptrroueah

Stav: dobrý (použitý), Kód: 0424 Značka: DMC - ITÁLIA Model: EUROPA 120 Automatická 2-pásová kalibračná brúsiaca linka na drevo, nábytok, interiérové prvky, drevené rámy, dvere, panely, kompozitné materiály a rôzne ďalšie aplikácie. Technické údaje: - Robustná konštrukcia - Max. pracovná šírka: 1200 mm - Max. pracovná výška: 170 mm - Rozmer brúsneho pásu: 2200 x 1250 mm Lodpfxsv A Ta Dj Agusah - 1. agregát: Kalibračný valec z gumy – priemer 220 mm – nastaviteľné prítlačné konzoly na obrobok – motor 20 HP - 2. agregát: Dokončovacia lišta s nastaviteľným pritlakom – motor 10 HP - Ofukovanie brúsneho pásu pre čistenie - Plynulá regulácia posuvu pásu: 3,5 až 17,5 m/min - Vakuový stôl – motor 7,5 HP - Automatické zdvíhanie pracovného stola - Automatické polohovanie pracovného stola - 2 odsávacie prípojky s priemerom 200 mm - Pracovný tlak: 7 bar - Celkové rozmery (d x š x v): 1900 x 1800 x 2100 mm - Hmotnosť: 2 500 kg

Stav: nový, Rok výroby: 2025, Dimensions (L/W/H): 4630 x 3005 x 2334 mm Weight: 12,160 kg Total Power Requirement: 135.6 kW Sanding Line SANDOMAT SFR-R-P1300 + SUR-R1300 - Working width: 1300 mm - Min. workpiece length: 465 mm - Min./max. pass-through height: 3–100 mm - Total power: 71.8 kW - Feed speed, stepless: 4–28 m/min - Motor power, first sanding unit: 30 kW - Motor power, second sanding unit: 22 kW - Motor power, third sanding unit: 15 kW - Feed motor: 3.7 kW - Height adjustment motor: 0.55 kW - De-dusting brush motor: 0.55 kW - Hardness of first sanding roller: 80 sh - Hardness of second sanding roller: 50 sh - Hardness of third sanding unit: Sanding pad - Diameter of first sanding roller: Ø255 mm - Diameter of second sanding roller: Ø255 mm - Diameter of third unit: Sanding pad - Sanding belt speed, first belt: 21 m/s - Sanding belt speed, second belt: 14.5 m/s - Sanding belt speed, third belt: 11 m/s - Sanding belt dimensions: 1320 × 2000 mm - Compressed air connection: 6 bar - Air consumption: 17 m³/h - Extraction capacity: 9200 m³/h - Voltage: 400 V / 50 Hz - Dimensions: L = 2100, W = 3005, H = 2334 mm - Weight: 6390 kg SANDOMAT SUR-R1300 Technical Data: - Working width: 1300 mm - Min. workpiece length: 390 mm - Min./max. pass-through height: 10–100 mm - Total power: 63.8 kW - Feed speed, stepless: 5–32 m/min - Motor power, first sanding unit: 37 kW - Motor power, second sanding unit: 22 kW - Feed motor: 3.7 kW - Height adjustment motor: 0.55 kW - De-dusting brush motor: 0.55 kW - Hardness of first sanding roller: 80 sh - Hardness of second sanding roller: 70 sh - Diameter of first sanding roller: Ø255 mm - Diameter of second sanding roller: Ø255 mm - Sanding belt speed, first belt: 21 m/s - Sanding belt speed, second belt: 18 m/s - Sanding belt dimensions: 1320 × 2400 mm Lajdpfx Agov A Hfteujh - Compressed air connection: 6 bar - Air consumption: 17 m³/h - Extraction capacity: 9500 m³/h - Voltage: 400 V / 50 Hz - Dimensions: L = 2530, W = 2170, H = 2290 mm - Weight: 5770 kg

Stav: nový, - NEW - GENERAL FEATURES: Machine Frame and Work Table * Steel construction with electrical control cabinet at the front of the machine * Insertion of sanding belts from the left side of the machine * Motorized table height adjustment * Main motor integrated in the machine frame Lsdpfx Agevwfrnjusah Electrical Equipment * Electromechanical control panel on the left front side of the machine * Automatic star-delta start for the main motor * Motor protection switches for the motors * Motors with insulation class IP 54 Emergency and Protection Devices * Safety microswitch for thickness excess * Automatic brake for immediate stopping of the units * Emergency stop bar at workpiece infeed * Mushroom emergency stop buttons at workpiece infeed and outfeed * Lockable main switch * Automatic emergency shutdown of the machine in case of: - Sanding belt tear - Sanding belt not tensioned - Lateral belt run protection - Insufficient compressed air - Main motor overload Note: The standard version with 400 Volt 50 Hz requires a three-phase power supply + neutral + earth. If the 400 Volt power supply is without neutral, a single-phase transformer from the price list must be ordered. The same transformer must also be ordered for machines with a voltage higher than 400 Volt, regardless of whether a neutral is present or not. Machine versions with 220 or 230 Volts (50 or 60 Hz) are available at extra cost (see price list). STANDARD BASIC MACHINE EQUIPMENT - R140/85 rubber-coated calibration roller, dia. 140 mm, 85 Sh - 1st position - R160/45 rubber-coated sanding roller, dia. 160 mm, 45 Sh - 2nd position - Hard sanding pad with manual adjustment of working height - Main motor 11 kW (15 HP) - Electronic ammeter for the main motor to display current consumption - Electronic display of working height - Electronically controlled sanding belt oscillation - Rubber pressure rollers - Kickback protection at infeed before the first unit - Rubber feed belt 60 Sh - Roller table with two rollers at the infeed and outfeed of the work table - Feed belt with two speeds 4.5 / 9 m/min with gear motor - Automatic belt centering Working width mm 1,100 Min./Max. working height mm 4 - 170 Sanding belt width mm 1,115 Sanding belt length mm 2,150 Main motor power kW (HP) 11 (15) Feed gear motor kW (HP) 0.45/0.8 (0.6/1.1) Feed speed m/min 4.5/9 Consisting of: 10.90.87 European safety regulations (CE mark) 93.07.31 Voltage 400 EU 93.12.01 Frequency 50 Hz 44.44.19 Version "B" for RCS 33.31.50 Roller table at infeed and outfeed for long workpieces 62.44.50 10" control panel with "eye-S" software integration 31.21.60 "RA" spiral-grooved steel contact roller - 1st unit 97.50.71 Main motor 15 kW (20 HP)

Stav: použitý, Rok výroby: 2000, Working width: .- mm Equipped with 1 sanding unit consisting of: - Combination unit with electronic pad for lacquer sanding - Lacquer sanding - Dust brush - Infeed roller table, 270 mm - Electronic program control for 50 programs Machine overhauled with brand new feed belt Valves and pressure regulators replaced Machine fully set up, Test sanding conducted Used machine Lasdpfx Aovwfl Usgujh Manufacturer: Bütfering Model: Classic 111 C Year of manufacture: 2000 Machine no.: 63608 Working width: 1100 mm Pass-through height: 160 mm CE Type Certificate GS-certified for wood dust Belt dimensions: 1120 mm x 1900 mm Feed speed: 4 + 8 m/min 1 combination unit, 3.7/7.5+15 kW, 3 belt speeds with automatic adjustment via control system Steel roller Diameter: 130 mm Belt speed: approx. 4.5 + 9 + 18 m/s Electronic segmented pad Segment pitch: 50 mm For lacquer sanding, workpiece-controlled Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, No warranty or guarantee