Msi

Stav: pripravené na použitie (použité), Rok výroby: 1998, K dispozícii je kompletná linka na opracovanie hrán Julius. Rozsah pevnosti v ťahu: 600N-2000N/mm², rozsah šírky pásu: 10mm-250mm, rozsah hrúbky pásu: 0,35mm-2,2mm, maximálna rýchlosť pásu: 160m/min, maximálna hmotnosť zvitku: 2500kg, maximálny vnútorný priemer zvitku: 400mm, maximálny vonkajší priemer zvitku: 1400mm. Dokumentácia je k dispozícii. Obhliadka na mieste je možná. Lsdpfjxxzinex Ac Heta

Stav: pripravené na použitie (použité), Rok výroby: 2008, Funkcionalita: plne funkčný, výkon: 24 kW (32,63 k), tlak (max.): 120 lišta, TECHNICKÉ PODROBNOSTI Minimálny rozmer pri obojstrannom obrábaní Priemer: 12 mm Dĺžka: 200 mm Maximálny rozmer pri obojstrannom obrábaní Priemer: 50 mm Dĺžka: 800 mm Minimálny rozmer pri jednostrannom obrábaní Priemer: 12 mm Dĺžka: 75 mm Maximálny rozmer pri jednostrannom obrábaní Priemer: 70 mm Dĺžka: 500 mm Priemer frézy: max. 140 mm Upínanie nástroja: SK40 Upnutie obrobku: hydraulický centrovací upínač Lsdpfxoxxkd Ie Ac Hota TECHNICKÉ ÚDAJE STROJA Výkonové údaje Výkon: 24 kW Napätie: 400 V Frekvencia: 50 Hz Max. tlak: max. 120 bar VYBAVENIE Horizontálne pracovisko na obrábanie koncov Súčasné obojstranné obrábanie koncov hriadeľových dielov.

Stav: dobrý (použitý), Ablängovacia / centrujúca fréza UMA SZM 100 E Rok výroby: 1976 Ljdpsxt Dzpsfx Ac Hjta Sériové číslo: 33-0241 Upínací rozsah: 10-160 mm Veľkosť frontovateľného priemeru: do 100 mm Vzdialenosť medzi upínacími bodmi: 90-1950 mm Vrtacia vreteno: ISO40 DIN2079 2 upínacie hlavy - Špeciálny program na rezanie vnútorných závitov s spätným posuvom a rezerváciou vretena ako druhý program v automatickom režime - Automatické 3-násobné odľahčenie pre hlbšie vŕtanie - Dvojbritý nástrojový držiak s pozitívnym uhlom, s drážkou 12H7 pre nadstavec s dvoma HM vymeniteľnými platničkami SPGN 190 (DIN4968) s upínaním pre centrovací vrták R4,0 mm Stroj bol až do poslednej chvíle v prevádzke a je plne funkčný. Cena je netto, voľne naložené zo skladu.

Stav: dobrý (použitý), Rok výroby: 2013, E.Büker - Typ N76 Stroj na úpravu koncov / Zosikrovací stroj - Pracovný rozsah 6 - 76 mm - Otáčky 10-1800 ot./min - Výkon 0,75 kW - Podstavec - Núdzové zastavenie Ltedpfxjxnlnme Ac Hoa Rozmery: DxŠxV 0,7x0,5x1,4 metra / Hmotnosť 250 kg Zmeny a chyby vyhradené.

Stav: dobrý (použitý), Centrovanie stroj - KUHN KAZ 80-2 - Max. priemer obrobku / kruh: 80 mm - Max. priemer obrobku / štvorec: 60 mm - Centrovanie dĺžka – neobmedzená - Upínacia jednotka so samostrediacim zverákom - Hnací vretena 1,8 kW - Vŕtacie skľučovadlo - Vanička na triesky - Pripojovací kábel - Zásuvka na vysokozdvižný vozík na prepravu Rozmery: D x Š x V 1,7 x 0,7 x 1,4 metra / Hmotnosť 600 kg Chyby a omyly vyhradené. Ltjdpfoxcmhwox Ac Hea

Stav: nový, Rok výroby: 2025, Funkcionalita: plne funkčný, Simply Center Punch – the center marking aid! Revolution in precision: Introducing the "Simply Center Punch" The world's only unique marking device – our own development from Northern Germany. The Problem No more inaccurate center marking of round parts - Are you familiar with the challenges of precise center marking on shafts/bars from 15 mm to 400 mm? - Inaccurate positioning. - Lighting conditions - No reading glasses for older users - Time-consuming manual alignment. - Inefficient and error-prone processes. - The market offers no universal and reliable solution for various diameters. Our Solution: Simply Center Punch – World First! Simply Center Punch: Precision made simple. - Unique worldwide: Our in-house developed and utility model protected center punching device/aid sets new standards. - 100% in-house development: From the initial concept to the finished product – everything from a single source. - Manufactured in-house: Quality “Made in Germany”. - Versatile application: For diameters from 15 mm to 400 mm. - Center punch at the push of a button: Simply place, turn the handle, and punch. Benefits at a glance Ltsdpfexb Ucaox Ac Hsa Your advantages. - Maximum precision: Centers drill holes and markings exactly, accurate to 0.3 mm. - Saves time and costs: Accelerates your workflow and reduces rework. - Easy handling: Intuitive operation, no prior knowledge required. – Weighs only 780 g. - Universal use: One tool for nearly all diameters in mechanical engineering, metalworking, etc. - Robust and durable: Made from high-quality materials for professional, long-term use.

Stav: použitý, Rok výroby: 1961, Priemer obrobku – max. 0 mm Priemer obrobku – min. 0 mm Dĺžka obrobku: 0 mm Celkový príkon: 0 kW Hmotnosť stroja cca 3 t Priestorové nároky cca 0 m Ledpfxswwl I Is Ac Hjta UMA je z roku výroby 1961 a vedenia boli v minulosti upravované.

Stav: použitý, Rok výroby: 2014, Technical details: Workpiece diameter - max.: 120 mm Workpiece length: 403 mm Spindle speed: 750 / 1333 rpm Workpiece diameter - max.: 120 mm Workpiece diameter - min.: 25 mm Workpiece length - min.: 117 mm Workpiece length - max.: 400 mm Stroke: 40 mm Total stroke, fixed unit: 140 mm Total stroke, adjustable unit: 320 mm Compressed air: 6 bar Total power requirement: 4 kW Machine weight approx.: 0.980 t Operating voltage: 3x400V / 50Hz Dimensions (L x W x H): approx. 2.1 x 0.8 x 2.1 m This is a centering and drilling machine that was specially designed for a customer's manufacturing concept. Operating principle: The shafts are manually placed into the central area, then clamped at the push of a button. The drill heads then advance simultaneously from both sides to the shaft to perform centering drilling operations. Ltedpsvxrwmjfx Ac Hja 2x drill heads (right/left) with tool holder/clamping device Mapal clamping cartridge, center height = 220 mm (Machine currently equipped with collet chuck and center drill) Clamping range max./min.: Ø 120 mm / Ø 25 mm via pneumatic cylinder, manual material feed Equipment: Mesh safety enclosure Emergency stop

Stav: nový, Rok výroby: 2024, Funkcionalita: plne funkčný, Clamping range: 25 mm ID to 120 mm OD Electric drive: 1050 W, 230 V, 50 Hz Tool holder speed (unloaded): 150 rpm, nominal 70 rpm Clamping with wrench Manual tool feed Weight approx. 6.5 kg Including operating manual Packed in wooden box Ljdpovr Ec Ajfx Ac Hsta Including 1 facing blade 90° and 2 chamfering blades 30°

Stav: použitý, Rok výroby: 2000, Workpiece diameter - max. 40 mm Workpiece diameter - min. 10 mm Workpiece length: 200 – 640 mm Control: Siemens S5 95 U PLC Total power requirement: 25 kW Machine weight approx. 5 t Space requirement approx. 8.5 x 2.8 x 2.35 m Hydraulic cutoff and double-end processing machine suitable for the pre-processing of trapezoidal-thread spindles and other round workpieces. Operations include bar cutting and simultaneous end machining such as chamfering, face milling/counterboring, and drilling, with stationary workpieces and rotating tools. Ledpsvp Sd Isfx Ac Hota Machine configuration: - Base machine: Model TR 60/4-650, max. workpiece length 640 mm - Bar magazine for bar lengths 2 – 3.5 m - Standard execution for solid bars up to 40 mm diameter - Central positioning of bar feed rollers - Bar feeder unit - Feed gripper, standard execution - Indexing table with 4 clamping stations, Model TR 300.00 - 4 base jaws, 80/140 mm width, 75 mm diameter - Indexing table pivots in both directions - Saw unit with worm drive TR 200.00, 100 mm stroke - Saw blade 350 mm, speeds 25/39 rpm - Motor power 2.6/3.2 kW - Motorized saw head positioning - Automatic saw stand positioning with hydraulic clamping - Saw blade guide - Machining unit no. 1 – USP.00/M - Speeds 842/1684 rpm, 3.3/4.0 kW - Working stroke 80 mm - Rapid traverse 40 mm - Spindle mount ISA 40/M16 - Toothed belt drive - Machining unit no. 2 – USP.00/M – UF - Speeds 360/720 rpm, 1.8/2.8 kW - Working stroke 80 mm - Rapid traverse 40 mm - Spindle mount ISA 40/M16 - Toothed belt drive - Thread cutting device for right- and left-hand threads - Machining unit no. 3 – USP.00/M - Speeds 842/1684 rpm, 3.3/4.0 kW - Working stroke 80 mm - Rapid traverse 40 mm - Spindle mount ISA 40/M16 - Toothed belt drive - Machining unit no. 4 – USP.00/M - Speeds 943/1882 rpm, 3.3/4.0 kW - Working stroke 80 mm - Rapid traverse 40 mm - Spindle mount ISA 40/M16 - Discharge chute - Millimeter rulers for all adjustment movements - Hydraulic unit with SAUER SUNDSTRAND feed pump - Accumulator - Rexroth flow regulator for machining units and saw - Coolant system with filter and tank - CALPERA coolant pump - Electrical system in separate control cabinet, control voltage 24V/50Hz - Siemens S5 95 U PLC - Machine lighting - Flashing light for machine stop signaling - Central lubrication - Chip conveyor In 2011, an extensive mechanical overhaul was carried out to optimize positioning and centering accuracy at a cost of €25,000. In addition, switches, some cables, ball bearings, seals, hydraulic hoses, etc. were replaced. The machine has hardly been used in recent years; the seller estimates total operating hours at approx. 24,000. This is a used machine; therefore, it is sold with exclusion of any warranty. STOCKING DEALER WITH 1,600 m² SHOWROOM.

Stav: veľmi dobrý (použitý), Rok výroby: 2002, Funkcionalita: plne funkčný, Vhodné pre čelné sústruženie, vnútorné a vonkajšie fazetovanie – stroj vo veľmi dobrom stave a s množstvom príslušenstva! TECHNICKÉ ÚDAJE Priemer obrobku: 25 – 80 mm Dĺžka obrobku: 50 – 1 200 mm Hmotnosť obrobku (max.): 12 kg Ltodevpgtqopfx Ac Hsa Ovládanie: Siemens SPS Upínanie nástroja: HSK 63C Otáčky vretena: 350 – 12 000 ot./min Pracovná výška: 1 000 mm Axiálny posuv frézovacej hlavy (automat./ručne, max.): 300 mm TECHNICKÉ PARAMETRE STROJA Celkový príkon: 26 kW Hmotnosť stroja: cca 6,8 t Priestorové nároky: cca 7,7 m x 2,9 m x 2,1 m VÝBAVA - 1 pracovná stanica - 2 vretenové jednotky - Podávací pás - Odsunový pás - Plne automatický pracovný cyklus

Stav: použitý, Rok výroby: 1991, Technical details: Workpiece diameter - max.: 8 - 50 mm Workpiece length: 5 - 500 mm Spindle speed: 100 - 1000 rpm Workpiece diameter - max.: Ø 50 mm / solid material Workpiece diameter - min.: Ø 8 mm / solid material Workpiece diameter - max.: Ø 70 mm / tube Workpiece diameter - min.: Ø 8 mm / tube Wall thickness: 1 - 10 mm Centre height: 300 mm Spindle bore: Ø 90 mm Cut-off length with swing stop min./max.: 5 - 500 mm Total power requirement: approx. 25 kW Machine weight approx.: on request Machine dimensions approx. LxWxH: 5.8 x 1.5 x 1.7 m Control cabinet dimensions: 1300 x 450 x 1950 mm Panel dimensions (L x W x H): 0.36 x 0.30 x 0.68 m Material feed dimensions (L x W x H): 5.5 x 0.95 x 1.15 m Parting and end-finishing machine incl. loading magazine (Manufacturing processes: cutting to length and deburring, parting off, facing, grooving, centering, and more possible) Operating principle: stationary material - rotating tools Additional features: - Speed of cut-off head/cutting head steplessly adjustable 100 - 1000 rpm - Speed of end machining, 4 wheelsets with speeds from 52 - 1320 rpm - Feed of cut-off head/tool steplessly adjustable 0 - 0.3 mm/rev, with rapid and working traverse, hydraulic - Deburring device feed steplessly adjustable 0 - 175 mm/sec - Material feed speed 170 mm/sec Ltjdpsu Iww Usfx Ac Hja - Piece counter - Loading magazine Operation via control panel/switch panel Ready for operation.

Stav: použitý, Rok výroby: 1975, Workpiece diameter: 8–125 mm Grinding depth: 130 mm Ltedpst Hwuvsfx Ac Hja Clamping length: 50–1100 mm Workpiece diameter – max.: 0 mm Workpiece diameter – min.: 0 mm Workpiece length: mm Total power requirement: 1 kW Machine weight approx.: 500 kg Space requirement approx.: m T E C H N I C A (Switzerland) Vertical Centre Bore Grinding Machine Model: ZSM 1000 Year of manufacture: ca. 1975 Serial No.: J 1400 Centre distance: 50 – 1,100 mm Workpiece diameter: 8 – 125 mm Swing diameter at tailstock centre / guideway: 290 mm Swing diameter at vice / grinding head column: 130 mm Workpiece weight approx.: 120 kg Max. centre bore taper diameter: 2–50 mm Max. centre bore taper angle: 60° Vice clamping range approx.: 4–150 mm Vertical stroke of grinding head, coarse adjustment: 130 mm Fine feed of grinding pin via handwheel: 0.01–1 mm Grinding pin diameter: 27–60 mm Grinding spindle speeds (depending on pulley): 13,000 – 45,000 rpm Workpiece drive: 0 rpm Total drive: approx. 1 kW, 380 V, 50 Hz Weight: approx. 500 kg Accessories / special equipment: • On this machine, the grinding pin rotates around a parallel, offset axis, creating a planetary motion along the hollow cone surface at the centre of the workpiece. • Manually height-adjustable workpiece centring stock with carbide inserts and counter-centre, with manual clamping and centring of the workpiece. • Manually operated dresser device mounted laterally to the grinding spindle, stroke approx. 40 mm, with an additional pendulum motion for generating a geometrically precise cone shape • Fold-down pre-centring device for workpiece • Manually height-adjustable tailstock and hole in the machine base for longer workpieces Machine is without workpiece drive in the tailstock. Machine is without pre-centring device Condition: Requires light overhaul – ready for demonstration – current new price at least approx. €80,000 Delivery: ex stock – as inspected Payment: strictly net – payable on receipt of invoice prior to delivery

Stav: nový, Rok výroby: 2024, hmotnosť obrobku (max.): 12 kg, • Hmotnosť približne 11,8 kg • CNC vyrobené z materiálu A 600, eloxovaný povrch • Pracovný rozsah do 506 mm priemeru • Žiadne dodatočné manipulácie s materiálom, čím sa šetrí kapacita žeriavov, pracovné hodiny a energia Ak sú na tento účel použité stroje, materiál je potrebné žeriavom dopraviť k stroju a späť na sklad – samotná strata času pri 2 strediacich vŕtaniach je značná. • Pripravené na použitie v priebehu sekúnd • Plynulé upínanie, 3 rozsahy priemerov Ltsdsri Sicjpfx Ac Hsa • Strediace vŕtanie za niekoľko sekúnd (priamo po rezaní na stroji) • Všetky komponenty vyrobené v Nemecku • Strediace otvory podľa DIN 333 tvar A, 60°, 5, 6,3 a 8 mm. Možnosť aj iných rozmerov. Povinná výbava pre každého obchodníka s oceľou! • Predajná cena: 5.950,- EUR bez DPH zo skladu, doprava v rámci Nemecka zdarma • Dodávaný v rozsahu: prípravok, akumulátorová vŕtačka Fein, nabíjačka, • 2 akumulátory, kompletné v kufríku • 3 strediace vrtáky 5, 6,3 a 8 mm DIN 333 A s plochou, vrátane 3 držiakov, jedno 6 m

Stav: dobrý (použitý), Rok výroby: 1991, Stroj na zrážanie hrán pílových kotúčov Výrobca: Loroch Model: AK Rok výroby: 1991 Ljdpfx Acjhwixdo Hsta Na zrážanie hrán HSS a segmentových kotúčových píl 161225ä

Stav: veľmi dobrý (použitý), Rok výroby: 1976, Here, centering and facing tools are being offered for a UMA countersinking and centering machine, model SZM 80/800. Approximately 11 complete sets are available for double-sided machining. Please refer to the images for further details. Please note: Only the tools are for sale; the machine has been sold! Ltedehfww Ispfx Ac Hja Purchase as a complete lot or by set upon request. The tool holders are specifically designed for UMA SZM machines.

Rok výroby: 1972, Stav: použitý, This machine is available three times. Specifications: Manufacturer: Landis Model: FRM 50 E-8 Year of manufacture: 1972 Quill stroke: approx. 100 mm Distance between spindles (retracted): approx. 550 mm Ledsg Umitjpfx Ac Hota Maximum workpiece diameter: 75 mm Travel per unit: 200 mm Drive power: 8.5 kW / 750 rpm 12 kW / 1450 rpm 18 kW / 2960 rpm Note: The machine is set up for ø20 mm and 65 mm length Accessories: with magazine

Stav: použitý, Nástroj na vykružovanie rúr, vykružovačka rúr -max. priemer rúry: 60 mm -excentrické upínanie Ledeb Dwrzjpfx Ac Hsta -držiak na rúry: výkyvný -rozmery: 480/160/V380 mm -hmotnosť: 28 kg

Stav: nový, Rok výroby: 2025, Prenosná centrovacia vŕtačka, iba 18 kg perfektné centrá podľa DIN 333 – jednoducho Lsdpfx Ajbc Sa Dec Hota Motor 220 V, 1300 W, plynulo nastaviteľné otáčky 0–2600 ot./min Štandardný upínací rozsah Ø 30 – 250 mm Príslušenstvo: čeľuste Ø 250–500 mm / Ø 500–750 mm