Nástrojár frézka

aciera f3

Stav: dobrý (použitý),

Stav: použitý, L + Z Lathe WEILER Type LZ PRIMUS GS Machine No. 2461 Year of manufacture approx. 1990 Center distance: 400 mm Gbedortd Uwspfx Aftjg Swing over bed: 250 mm Center height over bed: 125 mm Swing over cross slide: 140 mm Center height over cross slide: 70 mm Spindle bore: 24 mm Spindle speed: 60 - 3000 rpm, 18 steps Feed: longitudinal and transverse Chuck flange: short taper DIN 55022 size 4 Tailstock taper: MK 2 Drive power: 1.1 kW and 1.5 kW, pole-changeable Electrical connection: 380 Volt, 50 Hz - 3-axis digital readout FAGOR, Type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear stages - 3-jaw chuck RÖHM Ø 125 mm with stepped jaws - QUICK CHANGE TOOLPOST MULTIFIX with 1 tool holder - Collet set Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 mm - 1 center point for collet chuck - Emergency stop - Foldable chuck guard - Splash guard - Machine lamp - Electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Required floor space L x W x H: 1200 x 900 x 1560 mm Weight: 520 kg Good condition

Stav: dobrý (použitý), Lots of accessories, only offered as a complete package! Travel distances X / Y / Z: 300 / 300 / 135 mm Table size W x D: 700 x 190 mm Spindle speed: 95 - 6000 rpm / 11 steps Tool holder: W 20 Weight: approx. 450 kg Machine dimensions W x D x H: approx. 900 x 900 x 1500 mm Accessories: - Swivelling table - Rotary table Ø 200 mm Gbedpfjd Erqbsx Aftog - 6 holders - Various collets and clamping devices - Horizontal milling attachment - Work lamp - Coolant device - Vice

Stav: dobrý (použitý), Rok výroby: 1992, Automatic band saw manufacturer: JAESPA, model: W400 AZ Control: Minipos 807, year of manufacture: 1992 Cutting diameter (round material): max. 400 mm Saw blade dimensions: 5500 x 32 x 1.1 mm Automatic feed, minimum cut-off length: 20 mm Chip conveyor Total power requirement: 4 kW Weight: approx. 2500 kg Accessories: 2 x saw blades, 6 m roller conveyor with motorized drive, machine documentation available. Gbsdpfx Afegf H Saotjg Required space: 2.8 x 2.8 x 2 m

Stav: nový, Bernardo Universal Lathe Master 360 Pro Centre distance: 1000 mm Centre height: 180 mm Swing over bed: 360 mm Swing over gap*: 502 mm Swing over cross slide: 220 mm Bed width: 185 mm Spindle bore: 52 mm Spindle mount: DIN 55029, D1-5 Speed range (8 steps): 70 - 2000 rpm Longitudinal feed range (32 steps): 0.052 - 1.392 mm/rev Cross feed range (32 steps): 0.014 - 0.380 mm/rev Metric threads (26): 0.4 - 7.0 mm Gbedpfx Afed I H Izstsg Inch threads (34): 4 - 56 TPI Quill diameter: 42 mm Quill travel: 100 mm Quill taper: MT 3 Motor output (S1 100%): 1.5 kW (400 V) Motor input (S6 40%): 2.2 kW (400 V) Machine dimensions (W x D x H): 1825 x 750 x 1600 mm Weight approx.: 576 kg *Removable bed section length: 205 mm Scope of delivery: • 3-axis digital readout i200 with LCD display • 3-jaw chuck DK11-200 mm / D5 • Faceplate 200 mm / D5, to DIN 55029 • Fixed steady rest – through-hole diam. max. 70 mm • Travelling steady rest – through-hole diam. max. 60 mm • Coolant system • Initial fill with Shell Tellus 46 • Extendable chip tray • Clamping plate 280 mm • Four-way tool holder • Safety cover for four-way tool post • Slip clutch • Micrometer longitudinal stop • Thread chasing dial • LED machine light • Reducing sleeve • Change gears • 2 dead centres • Foot pedal with brake function (CE compliant) • Motor with magnetic brake (CE standard) • Machine base with drawers • Service tools

Stav: použitý, Rok výroby: 1955, Technické údaje: Maximálny priemer sústruženia nad lôžkom: 420 mm Maximálny priemer sústruženia nad suportom: 240 mm Maximálna dĺžka sústruženia: 1100 mm Maximálny priemer sústruženia v vybratí: 600 mm Rozsah otáčok: 24 - 900 ot./min, 8 stupňov Priemer vretenového otvoru: 41 mm Rozsah posuvu v smere X: 0,0120 - 0,1000 mm/ot. Rozsah posuvu v smere Y: 0,0062 - 0,0302 mm/ot. Upínanie pinoly koníka: MK 3 Posuv pinoly koníka: 220 mm Celkový príkon: cca 4,0 kW (bez záruky) Hmotnosť stroja: cca 1,2 t Rozmery stroja (D x Š x V): cca 2,3 x 0,9 x 1,3 m Výbava: Godpfsu Ix D Aex Aftjbg 3-čeľusťové skľučovadlo Röhm Ø 200 mm 4-polohový držiak nástrojov, otočný o 30° vpravo/vľavo 2x upínacia drážka pre kopírovacie zariadenie Otočný hrot

Stav: dielensky repasované (použité), Rok výroby: 2001, Funkcionalita: plne funkčný, číslo stroja/vozidla: 3595, Dear Ladies and Gentlemen, For sale is a Weiler Commodor B lathe, year of manufacture 2001, equipped with a Heidenhain 3-axis digital display. The machine has undergone extensive partial overhauling in our workshop. Among other things, the main spindle bearing as well as the feed/lead screw bearing have been completely renewed! Technically, geometrically, and visually, the machine is in excellent condition, which you are welcome to verify on-site. Availability: on request Machine no.: 3595 Year of manufacture: 2001 Centre height: 180 mm Centre distance: 1000 mm Spindle bore: Ø 56 mm Max. spindle speed: 2000 rpm Tailstock taper: MT4 Feed range: 0.026 – 0.888 mm/rev Possible thread types: metric, imperial, module, diametral pitch Metric thread pitches: 0.35 – 12 mm Spindle brake: switchable Connected load: 4 kW Dimensions: approx. 2.2 x 1.5 x 1 m (L x H x W) Weight: approx. 1.8 t Further equipment and accessories: 3-axis digital display, coolant system, chuck guard, pull-out chip tray, Röhm 3-jaw chuck, Röhm 4-jaw chuck, various clamping jaws, etc. Gbsdpfxothd Shs Afteg Our service promise to you: - We are a certified master enterprise in mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul the selected machine - On request, we can repaint the selected machine in your desired color - On request, you can order additional accessories such as tools directly - On request, we can install further accessories such as safety devices - We are happy to assist with shipping and/or installation

Rok výroby: 1988, Stav: použitý, Voest Alpine DA 160 sústruh, rok výroby 1988, s trojčeľusťovým skľučovadlom a systémom Multifix. Po dohode je možné predviesť v chode pod prúdom. Gsdjma Snxepfx Aftsbg

Stav: použitý, Rok výroby: 2003, x-travel: 930 mm y-travel: 400 mm z-travel: 406 mm Spindle speed: 9-6750 rpm Table: 1370 x 254 mm Quill stroke: 127 mm Quill feed: (3) 0.04; 0.08; 0.15 mm/rev Drilling capacity in steel: 32 mm Feed range: 19 - 890 (x) mm/min Spindle taper: SK 40 Column overhang: 200 - 680 mm Total power requirement: 4 kVA Machine weight approx.: 1.15 t Space requirement approx.: 1.5 x 1.45 x 2.2 m Gbodpfet U Rm Iox Aftog Product information "Multifunctional Milling Machine Optimill MF 4 Vario – Tool Milling Machine with Variable Speed" Optimill MF 4 Vario – Multifunctional drilling and milling machines for professional use. Electronically infinitely variable drive via a frequency inverter "made in Germany" and digital 3-axis position display DPA 21. Heavy, robust construction made from high-quality Meehanite cast iron. High concentricity achievable by tapered roller bearings, less than 0.01 mm runout measured at the quill. Automatic quill feed. Forward/reverse for thread cutting. X and Y axes with adjustable dovetail guides. Coolant system. Y-axis with flat guideways. Large Y-axis travel of 400 mm. Motorised table elevation with rapid traverse (Z-axis). Features: - Frequency inverter quality Made in EU - Drilling-milling head, tiltable ± 45°, overhang 200 - 680 mm - Spindle speeds infinitely variable, exceptionally wide speed range - Adjustable drilling depth stop with millimetre scale, readable from the front - Adjustable, large protective screen - Cross table: robust, large dimensions, precisely surface-ground - Motorised Z-axis table height adjustment - Adjustable end stops - OPTI control panel: Integrated control panel; integrated digital position display DPA 21 including spindle speed display - X-axis: Motorised table feed, infinitely variable feed adjustment, rapid traverse, forward/reverse Technical Data: - Length (Product): 1,500 mm - Width/Depth (Product): 1,450 mm - Height (Product): 2,200 mm - Net weight: 1,150 kg - Total connected load: 4 kW - Electrical voltage: 400 V - Phases: 3-phase AC - Mains frequency: 50 Hz - Max. face mill diameter: 100 mm - Max. end mill diameter: 20 mm - Vertical spindle overhang: 200 - 680 mm - Vertical spindle mounting: ISO 40 DIN 2080 - Vertical spindle speed range: 8 steps, electronically adjustable - Horizontal milling table length: 1,370 mm - Horizontal milling table width: 254 mm - Distance vertical spindle – horizontal table min.: 40 mm - Distance vertical spindle – horizontal table max.: 446 mm - Horizontal table T-slot size: 16 mm - Horizontal table T-slots: 3 - Horizontal table T-slot spacing: 63 mm - Horizontal table max. load capacity: 275 kg - Vertical spindle drive motor: 3 kW - Coolant pump motor: 100 W - Manual X-axis travel: 930 mm - Manual Y-axis travel: 400 mm - Manual Z-axis travel: 406 mm - Automatic X-axis travel: 850 mm - Automatic Z-axis travel: 350 mm - Drilling capacity steel (S235JR): 32 mm - Continuous drilling capacity steel (S235JR): 28 mm - Milling head rotation range (Z to X plane): +/- 45 degrees - Quill stroke: 127 mm - Quill feed: 0.04/0.08/0.15 mm/rev

Rok výroby: 1993, Stav: dobrý (použitý), číslo stroja/vozidla: 03.2370, Manufacturer: Arthur Klink Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Machine No.: 03.2370 Gbjdscc D Ddjpfx Aftog General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feeding for 2 workpieces, in good condition Pulling force: 10,000 kg Broaching length: 1,000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Draw head mount diameter: 3 x Ø 80 mm Clearance between cylinders: max. 435 mm Cutting speed: hydraulically adjustable from 1 m/min up to max. 10.9 m/min Return speed: hydraulically adjustable from 5 up to max. 27.5 m/min Machine dimensions (W x D x H): approx. 5,500 x 2,800 x 4,900 mm Power supply / Connected load: 380 Volt 50 Hz / 38 kW Accessories / Special Features: The machine is equipped with a workpiece table and a pull bridge for 3 broaching stations. Furthermore, it features an automatic workpiece feeding system for 2 workpieces. Clamping of shank and end piece holders is hydraulic. The machine has a coolant system with an integrated magnetic chip conveyor for use without a special foundation (pit). Remarks: This machine is designed for large series production. It is in very good condition, still in its original paint. The machine is powered and available for inspection at our warehouse.