Skrutkový kompresor

ALMIG Combi XP 15

Stav: veľmi dobrý (použitý), Rok výroby: 2026, prevádzkové hodiny: 5 h, Funkcionalita: plne funkčný, Exhibition unit, immediately available: Almig variable screw compressor COMBI XP 15-270D – 15 kW – with integrated refrigerated dryer with timer-controlled condensate drain with 270 liter receiver equipped with Aircontrol Base controller Model: Combi XP 15-270 D Controller: AIR CONTROL BASE Technical Data Model: Combi XP 15-270D Adjustable operating pressure range (continuously variable): 5 – 13 bar Free air delivery at minimum / maximum speed, measured according to ISO 1217 Annex C at 5 bar (g): 0.50 to 2.49 m³/min at 6 bar (g): 0.48 to 2.41 m³/min at 7 bar (g): 0.48 to 2.32 m³/min at 8 bar (g): 0.45 to 2.23 m³/min at 9 bar (g): 0.45 to 2.12 m³/min at 10 bar (g): 0.45 to 2.02 m³/min at 11 bar (g): 0.45 to 1.90 m³/min at 12 bar (g): 0.44 to 1.80 m³/min at 13 bar (g): 0.43 to 1.69 m³/min Installed motor power: 15 kW Protection class / insulation class (drive motor): IP 23 Operating voltage / frequency: 400 / 85-400 V/Hz Compressed air connection: 3/4" G Dimensions and weight: Iedjw Du Dxepfx Ag Neau Length (mm): 1530 Width (mm): 700 Height (mm): 1640 Weight (kg): 595 kg Visit our premises in Erlangen – we always have a wide range of new and used screw compressors in stock.

Stav: použitý, Drviaca linka LINI LW 40 – použité zariadenie – Iaedpowi Stnjfx Ag Neu Hydraulický podávač, SPS riadenie, ----- Technické údaje ----- Otváranie násypky: 600 x 820 mm, Objem násypky: 0,5 m³, Priemer rotora: 200/250 mm, Dĺžka rotora: 600 mm, Výkon motora: 18,5 kW, Hmotnosť: 1050 kg, Rozmery (DxŠxV): 2.070 x 1.260 x 1.640 mm, Veľkosť otvorov sita: 15 mm

Stav: dobrý (použitý), Rok výroby: 2007, Jednohriadeľový drvič Weima WLK10 hlavný motor 55 kW dĺžka rotora 100 cm Iasdpfx Agetpcpns Nou stroj je 100% funkčný

Stav: nový, Rok výroby: 2024, Single-shaft shredder HOKUTech Special Offer Model H600 Compact, Robust, High Throughput The H600 high-performance shredder, with its flexible range of applications, is capable of processing all types of wood materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer offcuts, etc.) into fuel chips, achieving significant volume reduction even for bulky materials. The hydraulically operated pusher feeds the wood waste to be shredded into the rotor's cutting area and is automatically controlled based on load. The high-performance E-rotor, made of solid steel, has a diameter of 252 mm and operates at a rotor speed of 85–95 rpm. The concave-ground, aggressive, and four-way reversible blades/cutting crown inserts are located in milled pockets on specially designed blade holders. This highly efficient system ensures high throughput, low energy consumption, and optimal discharge of shredded material thanks to the minimized cutting gap between counter-blade and rotor. Chip size (10 – 60 mm) Iaedpfjutmw Hjx Ag Neu Technical data: • Hopper opening: 600 x 800 mm • Hopper volume: 0.6 m³ • Rotor working width: 600 mm • Rotor diameter: 252 mm • Drive power: 15 kW • Rotor speed: 90 rpm Location: Arriving at warehouse 54634 Bitburg - available upon request -

Stav: ako nová (výstavný stroj), Funkcionalita: plne funkčný, výkon: 11 kW (14,96 k), celková hmotnosť: 850 kg, priemer odsávacej trysky: 160 mm, otáčky (max.): 85 ot./min, priemer rotora: 248 mm, Ďalšie technické údaje Plniaci otvor: 516 mm x 830 mm Priemer sita: 15 mm - 20 mm Počet obojstranných rezných doštičiek: 14 ks Výkonnosť: cca 0,5 – 1 (v závislosti od vlastností materiálu a priemeru sita) Požadovaná rýchlosť odsávania: 22 m/s Hladina akustického tlaku: 82 dB (A) Štandardná výbava Vrátane násypky Vyhotovenie motora v IE2 Pohon prostredníctvom remeňa s dvojstupňovou prevodovkou a elastomérovým tlmičom Iasdpfjw A Acaex Ag Nju Sito s veľkosťou otvorov 15-20 mm Vrátane odsávacieho hrdla Rezací systém ÜSS Stroje s tlmiacimi nohami Siemens logický modul LOGO, vrátane reverzačnej automatiky a odstavenia pri vniknutí cudzích látok Automatické vypnutie pri chode naprázdno Ovládacie prvky a počítadlo hodín vo dverách rozvádzača Napätie 400 V/50 Hz 1 ks beznapäťového kontaktu pre nadväzujúce zariadenia

Stav: ako nová (výstavný stroj), Rok výroby: 2025, prevádzkové hodiny: 2 h, číslo stroja/vozidla: 101955.01001, Výstavný kus ihneď k dispozícii: Nový Kaeser SK 22 - 10 bar skrutkový kompresor Iajdexr Dmvjpfx Ag Nju Ovládanie: SIGMA CONTROL 2 Rok výroby: 2025 Prevádzkové hodiny: 2 h Tlak: 10 bar Menovitý výkon: 11 kW Výtlak: 1,68 m³/min Hladina hluku: 66 dB(A) Výstup stlačeného vzduchu: 1" Rozmery (dĺžka x šírka x výška): 750 x 895 x 1260 mm Hmotnosť: 312 kg Prevádzkové hodiny: 2 h Pre nové stroje je možné výhodné leasingové financovanie cez našu banku. (Platí aj pre zákazníkov z Rakúska a Švajčiarska) Navštívte našu predajňu. Stále máme veľký výber nových a použitých kompresorov na sklade!

Stav: ako nová (výstavný stroj), Rok výroby: 2022, Available immediately: New ALMIG LENTO 22 LK speed-controlled screw compressor (air-cooled), oil-free. Iaodpfeh Unprsx Ag Nju Equipment: - AIR CONTROL P controller Technical data Model: LENTO 22LK Possible operating pressures of the unit (infinitely adjustable): 5 to 10 bar Free air delivery at minimum/maximum speed, measured according to ISO 1217 Annex C: At 5 bar min/max: 1.03 / 3.67 m³/min At 6 bar min/max: 1.00 / 3.46 m³/min At 7 bar min/max: 0.97 / 3.29 m³/min At 8 bar min/max: 0.93 / 3.06 m³/min At 9 bar min/max: 0.90 / 2.82 m³/min At 10 bar min/max: 0.87 / 2.58 m³/min Rated drive motor power: 22 kW Drive motor protection/insulation class: IE3 Rated fan motor power: 0.2 kW Fan motor protection/insulation class: IP 54 / H Operating voltage/frequency: 400 / 50 V/Hz Residual oil content: 0 mg/m³ Sound pressure level (DIN 45635 T.13), sound-insulated: At 50% load: 67 dB(A) At 100% load: 69 dB(A) Length: 1,880 mm Width: 850 mm Height: 1,985 mm Weight: 910 kg Compressed air connection: G 1 inch Oil-free screw compressors of the LENTO series offer highest efficiency in compressed air generation by precisely matching the volumetric flow to the required air demand, ensuring low compressed air outlet temperatures and minimizing service and maintenance costs. The need for high-quality, 100% oil-free compressed air is essential not only in pharmaceutical, food, electrical, and medical industries, but in any application where products of the highest quality are produced. Therefore, with the oil-free LENTO series, ALMiG sets a standard for maximum compressed air quality for even the most sensitive applications. Throughout the compression process, only water — the most natural of all resources — is used. The result is: - Clean, environmentally friendly oil-free compressed air; any dust particles taken in are washed out by the water - Clean condensate — pure water — can be discharged directly into the sewage system - Lowest possible temperatures during compression thanks to optimum heat dissipation via water, resulting in minimal energy consumption for compressed air generation

Stav: takmer ako nový (použitý), Rok výroby: 2022, Funkcionalita: plne funkčný, číslo stroja/vozidla: SN 1171, hmotnosť obrobku (max.): 450 kg, pracovná výška: 870 mm, posuvová rýchlosť osi Y: 45 m/min, pracovná šírka: 300 mm, dĺžka záruky: 12 mesiace, celková dĺžka: 1 900 mm, typ nastavenia výšky: mechanický, celková hmotnosť: 450 kg, celková výška: 1 500 mm, celková šírka: 1 300 mm, pripojenie stlačeného vzduchu: 6 lišta, Výbava: dokumentácia / manuál, The APACHE 3 is a cost-effective solution, suitable for both craft and industrial use, optimally designed for coating façade cladding and their substructures. It is perfectly and unrestrictedly suited for coating cross-sections of 300 mm x 25 mm, delivering exceptionally efficient and economical high-quality surfaces—no special operator expertise required. The unit can also be integrated into automated systems or coating lines. You can coat plank materials, profile boards, tongue-and-groove boards, rhomboid profiles, laminated timber, and structural timber, as well as decking boards, garden, log cabin, sauna or privacy screens—essentially any products where a first-class visible surface is required. Substructures (generally black) are coated with thin, highly pigmented stains containing wood preservative agents—even without lateral brushes. The APACHE 3 sets itself apart from standard market products with its robust monoblock steel welded construction and its coating, which is fired on in an extremely resistant Teflon (enamel) process. This non-stick coating guarantees a self-cleaning operation with extremely low maintenance requirements. The machine offered is brand new and available for viewing in our showroom. We are also happy to demonstrate our machines and systems at our facility or at customer locations near you. Additional information and detailed description available on our SARMAX website. APACHE 3 Serial No.: SN 1171 Flood coating machine with three (3) brushes Working width: 300 mm Working height: 100 mm Minimum workpiece length: 100 cm Feed speed, frequency-controlled: 10–45 m/min Number of powered conveyor rollers: 3 Transport roller diameter: 80 mm Brush arrangement: two (2) top, one (1) bottom Brush diameter: 160 mm Central brush drive: 2.2 kW Compressed air blow-out left/right, fan nozzles for blowing out tongue-and-groove joints: 80 l/min Double diaphragm pump: 90 l/min Compressed air consumption: 600 l/min Connection: CEE plug 16 A, 400/50/3 V/Hz/PE Total power: 4.5 kW Working height: 900 ± 50 mm Approximate weight: 450 kg Operation: via control and indicator devices according to VDE, hydraulic ball valves Dimensions (L/W/H): 1,900 x 1,300 x 1,500 mm Iasdpfx Agexhquxo Nou Standard: CE Colour, design: grey, RAL 7046

Stav: dobrý (použitý), Rok výroby: 2012, Pomalobežný stroj s posuvnou podlahou. Šírka rotora 830 mm. Veľký rotor s 38 nožmi. Veľkosť nožov: 40 x 40 mm. Motor 22 kW. Veľkosť otvorov sita: 25 mm. Iajdey T Ef Eopfx Ag Nou

Stav: nový, Rok výroby: 2026, prevádzkové hodiny: 1 h, New speed-controlled ALMIG screw compressor LENTO 15 LK (air-cooled), oil-free Features: - AIR CONTROL HE controller - GLW load/unload operation Technical data Model: LENTO 15LK Adjustable operating overpressures (continuously variable): 5 to 10 bar Free air delivery at minimum/maximum speed, measured according to ISO 1217 Annex C: - at 5 bar min/max: 1.03 / 2.64 m³/min - at 6 bar min/max: 1.00 / 2.42 m³/min - at 7 bar min/max: 0.97 / 2.20 m³/min - at 8 bar min/max: 0.93 / 2.03 m³/min - at 9 bar min/max: 0.90 / 1.82 m³/min - at 10 bar min/max: 0.87 / 1.63 m³/min Drive motor rated power: 15 kW Drive motor protection type/class: IE 3 Fan motor rated power: 0.2 kW Fan motor protection type/class: IP 54 / H Ijdpjdtm Ndofx Ag Nsau Operating voltage / frequency: 400 V / 50 Hz Residual oil content: 0 mg/m³ Sound pressure level (DIN 45635 T.13), soundproofed: - at 50% load: 66 dB(A) - at 100% load: 68 dB(A) Dimensions (L x W x H): 1,880 x 850 x 1,985 mm Weight: 890 kg Compressed air connection: G 1" inch The oil-free LENTO series screw compressors ensure highest efficiency in compressed air processing thanks to precise adaptation of the volume flow to the respective compressed air demand, low compressed air discharge temperatures, and minimized service and maintenance costs. The requirement for high-quality, 100% oil-free compressed air is not only a necessity in the pharmaceutical, food, electronics, and medical industries, but also wherever products of the highest quality are produced. For this reason, ALMiG relies on the oil-free compressors of the LENTO series to provide maximum compressed air quality for the most sensitive applications. Only water, the most natural of all raw materials, is used in the compression process. The result: - Clean, environmentally friendly compressed air without oil; intake dust particles are washed out by the water - Clean condensate—pure water—that can be discharged directly into the sewage system - Lowest possible compression temperatures due to optimal heat dissipation via water, and therefore minimal energy consumption for compressed air generation