Presuvný stĺpový frézovací stroj

ANAYAK HVM 3800

Stav: použitý, CNC traveling column drilling and milling machine ANAYAK Type HVM-3800-P Bed type milling machine, design similar to a floor borer with a fixed table Machine No.: M-20021203 Year of manufacture: 2002 “Refurbished 2025” Machine will be workshop overhauled in 2025 and can then be inspected at the warehouse in 37235 Hessisch Lichtenau. Travel distances X: 3200 mm, Y: 1200 mm, Z: 1500 mm Table size 3800 x 1200 mm T-slots 8 slots, 22 mm, spacing 130 mm Max. table load 25 tons (fixed table – virtually unlimited load capacity) Spindle taper ISO 50 (DIN69871-A) (drawbar DIN 69872-B) Spindle speed 60–4000 rpm, infinitely variable Feed rate up to 10,000 mm/min, infinitely variable Rapid traverse speed in X + Y 20 m/min Rapid traverse speed in Z 10 m/min Spindle drive power 22 / 30 kW Power connection 400 Volt, 50 Hz, 50 kVA – automatic tool changer for 30 tools – spindle drive with 2 speed ranges – with automatic tool changer and tool magazine – orthogonal milling head with hydro-mechanical tool clamping – orthogonal milling head fully automatic swivel in two 45° planes – B+C axis – control: HEIDENHAIN iTNC 530, with electronic handwheel – prepared for wireless touch probe (probe and receiver not included) – additional HF spindle, 18,000 rpm – for mounting – free-standing control cabinet – chip conveyor inserted between traveling column bed and machine table – 32,078 operating hours read – coolant system – separate hydraulic unit Nedpfjxcgtgex Af Recl – operating manual with circuit diagrams Machine footprint: L x W approx. 1000 x 700 cm Installation height of the machine: approx. 410 cm Weight (complete) approx. 33 tons Good condition

Stav: pripravené na použitie (použité), Rok výroby: 2013, Funkcionalita: plne funkčný, Cylindrical Grinder – External / Manufacturer: WMW / Model: SA 6U x 3000 Year of (Complete Overhaul): 2013 (Machine Refurbisher: SerWeMa/Germany) Part Spectrum: Straightening rolls, grinding spindles, general shaft machining. Special feature: Machining with up to 6 steady rests. The machine can be inspected under power by appointment. TECHNICAL DATA: Working Area: - Center height: 260 mm - Maximum swing diameter: 515 mm - Maximum grinding length: 3,000 mm - Maximum grinding diameter: 515 mm - Maximum workpiece weight: 500 kg Workpiece Headstock: - Infinitely variable speed: 12.5 – 355 rpm - Center taper: Morse 5 Tailstock: - Maximum quill stroke: 40 mm - Center taper: Morse 5 Njdpfx Aoxymdasf Rocl Grinding Spindle Headstock: - Grinding wheel: * Maximum external diameter: 630 mm * Maximum width: 125 mm EQUIPMENT: - Extraction unit - Documentation - CE marking No guarantee for completeness and accuracy of the technical specifications and equipment. – Subject to prior sale – A detailed technical datasheet and further information on equipment are available on request.

Rok výroby: 2021, Stav: nový, Typ: Gasbeheizt mit Zentralrekuperator Max. Temperatur: 1.300°C Maximale Ofenleistung: ca. 700 kg/h Lichte Türöffnung (B x H): 600 x 400 mm Anzahl der Brenner: 6 Anzahl der Regelzonen: 3 Heizleistung: 720 kW Elektrische Gesamtanschlussleistung: ca. 15 kVA Nedpfx Aog E S Insf Recl SPS-Steuerung: Siemens S7

Rok výroby: 1990, Stav: dobrý (použitý), CNC-štvrtá os Njdpfxjgabu Us Af Rjcl výrobca: NIKKEN Typ: CNC-200, rok výroby: 1990 s protiľahlým oporným ložiskom a základnou doskou.

Stav: veľmi dobrý (použitý), Rok výroby: 2001, Funkcionalita: plne funkčný, číslo stroja/vozidla: 930088, Krajina pôvodu výroby: Švajčiarsko Napätie: 400V / 50/60Hz / 3fázový Čistá hmotnosť (stroj + rozvádzač): 3250 kg + 400 kg Colná pozícia: 8456.30 20 Rozmery: 260 x 281 x 225 cm TECHNICKÉ ŠPECIFIKÁCIE Typ obrábania: ponorové Maximálne rozmery obrobku: 1200 x 700 x 400 mm Maximálna hmotnosť obrobku: 1500 kg Rozmery stola: 900 x 600 mm Vzdialenosť podlaha – stôl: 900 mm Celkový objem dielektrika: 1200 l Osi X, Y, Z, U a V Pohyby X, Y, Z: 550 x 350 x 400 mm Pohyby U, V: 550 x 350 mm Antikolizná ochrana: osi X, Y, U, V, Z Kužeľové obrábanie, max. kužeľ: +/- 30° / 400 mm Dostupné priemery drôtu: Ø 0,25 mm (voliteľne 0,1/0,2/0,3 mm) Typy vedenia drôtu: uzavretý diamantový typ, bez medzery Hmotnosť a typ dostupnej cievky (DIN štandard): 1,6 kg (K 100) až 8 kg (K 160) Hmotnosť a typ dostupnej cievky (JIS štandard): 3 (P3) až 5 (P5) Dielektrikum Papierové filtre: 2 kazety Teplota dielektrika: +/- 1°C Celkový objem deionizačnej živice: 20 l Maximálny vstrekovací tlak: 20 bar Generátor: dvojitý zdroj Isopulse Napájanie: 380/400V 3 fázy Celkový príkon: 10 kVA Maximálna rýchlosť rezania: 400 mm2/min Minimálna drsnosť povrchu: 0,20 mikrónu Ra Merací systém: sklenené lineárne pravítka Rozlíšenie merania: 0,5 mikrónu Servomotory: AC typ Poznámka: Uvedené technické informácie sú nezáväzné a môžu obsahovať chyby alebo opomenutia. Nedpfx Afjw Ucyus Rscl

Stav: generálne opravený (použitý), Rok výroby: 1989, Funkcionalita: plne funkčný, číslo stroja/vozidla: 193 34-41, pojazdová vzdialenosť osi X: 1 600 mm, zdvih osi Y: 1 250 mm, zdvih osi Z: 1 600 mm, zaťaženie stola: 2 500 kg, priemer vretena: 102 mm, otáčky vretena (min.): 4 ot./min, maximálna rýchlosť vretena: 1 600 ot./min, celková výška: 3 500 mm, celková dĺžka: 6 500 mm, celková šírka: 4 700 mm, dĺžka stola: 1 400 mm, šírka stola: 1 250 mm, rok poslednej generálnej opravy: 2025, Výbava: otáčky plynule nastaviteľné, The machine was overhauled and modernized in 2025 and is immediately ready for operation! Travel distances: - Table cross travel (X-axis): 1600 mm - Spindle head vertical travel (Y-axis): 1250 mm - Table longitudinal travel (Z-axis): 1475 mm (limited due to large table) - Quill movement (W-axis): 710 mm - Table rotation (B-axis): 360 degrees Clamping table: - Clamping surface: 1250 x 1400 mm - Table load capacity: 2.5 t Boring spindle: - Diameter: 102 mm - Tool holder: DIN2080 50 SK - Stepless speed range: 4 - 1600 rpm - Drive power: 13 kW Feed: - X, Y, Z axis, stepless: 1 - 4000 mm/min Rapid traverse: - X, Y, Z axis: 4 m/min Connected load: 42 kW Weight: 10 t Space requirement (L x W x H): 6.5 x 4.7 x 3.5 m Features: - Heidenhain TNC 320 - Coolant system Nsdpfow Rn R Rex Af Recl

Stav: veľmi dobrý (použitý), Rok výroby: 2000, Funkcionalita: plne funkčný, First commissioning: 2000 Control system: Heidenhain TNC 430 M Machine hours: 111,500 h X-axis: approx. 4,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,250 mm A-axis: ±110° C-axis: ±300° Clamping table Clamping surface: approx. 6,000 x 2,000 x 420 mm T-slot spacing: 18H12 / 250 mm Max. table load: 30,000 kg/m² 2-axis milling head AC3 Spindle power: 25 kW Spindle speed: max. 15,000 rpm Torque: 80 Nm Tool holder: HSK 63A Tool clamping: hydraulic !!! Spindle completely overhauled at the end of 2024 !!! Linear axis drives Feed rate X, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X, Y, Z: up to 1.5 m/s² Connection data Connected load: 40 kW Main fuse: approx. 80 A Dimensions, Weights Space requirement for machine with peripherals: approx. 8,500 x 5,600 x 4,945 mm Total weight: approx. 18,000 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: green Additional equipment - 3-sided enclosure, without extraction ducts - The additional clamping table shown is not included in the scope of delivery Njdpew Rl S Sefx Af Rocl Machine condition Fully functional, very good condition. The machine remains powered and is immediately available.

Stav: veľmi dobrý (použitý), Fixed-bed milling machine Zayer model KF 3000 with Heidenhain 355 CNC, equipped with external computer for CAD/CAM, table size 3000mm x 1000mm, travel: longitudinal 2700mm, cross 1250mm, vertical 1000mm, rapid traverses 15,000mm/min, Huron-type head ISO 50, 3-range variable spindle speeds up to 3,000 rpm, Huron head recently overhauled with replacement of gear pair and all head bearings, power 30kW, table load capacity 10,000kg, machine in good condition, machine weight 25 tons. Ncedpfx Aevdv Tcef Rjl

Stav: použitý, Rok výroby: 2001, Dĺžka sústruženia 470 mm Max. priemer sústruženia 390 mm Otáčky vretena 3500 ot./min Posuvy X/Z – 235/520 mm Ncedpfx Ajxdfi Nef Rjl Počet staníc v revolveri 12 ks Riadenie: MSG 500 Príslušenstvo: Rôzne držiaky na nástroje

Stav: veľmi dobrý (použitý), Rok výroby: 1998, X-travel 800 mm y-travel 600 mm z-travel 500 mm OFFER We can offer you, subject to prior sale and errors, from stock and without obligation: HERMLE 5-Axis Universal Machining Center in gantry design with swivel rotary table Model: C 800 U Year of manufacture: 1998 Serial No. 12648 _____ Milling head travel X-axis (longitudinal): 800 mm Milling head travel Y-axis (cross): 600 mm Milling head travel Z-axis (vertical): 500 mm NC swivel axis A: -20 / +90 ° NC rotary table C-axis: 360,000 ° Maximum reach of vertical spindle: approx. 600 mm Maximum installation height under spindle: approx. 100 / 600 mm Table size (swing diameter Ø 630 mm): 540 x 540 mm Maximum workpiece weight on table: approx. 300 kg Spindle taper: SK 40 Vertical spindle speed, infinitely variable: 18,000 rpm Feed rates/rapid traverse, infinitely variable: 2 – 35,000 mm/min Feed force approx.: 11/16 Nm Spindle drive: 15 kW Total connected load: approx. 37 kW - 400 V - 50 Hz Weight: approx. 8,000 kg Accessories / Special equipment: • Compact, modified gantry design with 3 axes in the milling head for feed rates up to 35 m/min. All drives and guides are located outside the working area. • Machine bed made of mineral cast with high damping characteristics, installation without foundation, high static and dynamic stability. • SIEMENS 5-axis contouring control type 840 D with graphics and all modern programming options for full 5-axis machining of complex workpieces with electronic handwheel • NC swivel rotary table (C-axis 360,000° / B-axis -20/+90°) Ø 630 mm • Solid vertical head with HERMLE milling spindle up to 18,000 rpm with automatic swing nozzle block • Tool changer with extended (add-on) magazine for up to 87 tools • Coolant unit with chip conveyor, oil mist extraction system with filter, full enclosure • Extensive accessories including approx. 50 tool holders, operating manuals. Nsdex Dndcopfx Af Rocl Condition: very good – machine powered and ready for demonstration A video of the machine will be available here shortly (please click the link): C 800 U/4 Delivery: ex stock – immediately available, FCA Metzingen Payment: strictly net – due immediately upon receipt of invoice, before delivery of the machine