Balenie paliet Natiahnutie otočného stola

ATLANTA - 25mm flacher Drehteller SYNTHESI - 200% Vorreckung

Demonstration machine, like new.

SYNTHESI with a flat turntable
Turntable height: 25 mm
Short ramp: 500 mm long

Manual rope formation at the pallet, mounted on the frame to reinforce the wrapping

TECHNICAL DETAILS:
Turntable LOW PROFILE
· Height: 25 mm
· Max. pallet dimensions: 1000 x 1200 mm
Cjdpov Iqucofx Abterh
· Max. load capacity: 1200 kg
· One ramp included

Wrapping height (including pallet): 2,200 mm
Height detection via photoelectric sensor
Frequency-controlled turntable drive (soft start - start/stop)
Frequency-controlled carriage speed up/down
Signal tone at the start of wrapping and end of cycle
Emergency stop switch according to CE regulations
Turntable always stops in the same home position
Crash protection for the film carriage
Push button for machine power-on, start & stop function & reset according to CE standards Ø 22 mm

ADJUSTABLE PARAMETERS ON THE CONTROL PANEL
All function parameters adjustable via display
F00 - Lock display for program changes
F02 - Infinitely variable turntable speed 5-12 rpm
Carriage speed upwards and downwards adjustable independently
F03 - Carriage speed upwards from 1.3 to 5.4 m/min
F04 - Carriage speed downwards from 1.3 to 5.4 m/min
F05 - Number of wraps at the pallet base (1 - 10 wraps)
F06 - Number of wraps at the pallet top (1 - 10 wraps)
F09 - Photo cell delay for wrapping height
F13 - F16 - Film tension for top and bottom wraps / up and downwards independently adjustable
F62 - Ergonomic height for film replacement
Film consumption display (optional)

ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL
6 storable wrapping programs
F01 - 1 - Cross wrapping (upwards/downwards)
F01 - 2 - Simple wrapping (only up or only downwards)
F01 - 3 - Push button for manual functions
F10 - F11 - Wrapping cycle with preset start and stop height
F12 - Wrapping at a preset height (disabling the photoelectric sensor for height)
F22 / F23 - Wrapping cycle for top sheet film
F29 - Soft start cycle for applying edge protection
F30 - F31 - Wrapping cycle with reinforcement and adjustable number of wraps
Soft start to reduce film tears on sharp pallet edges
Wrapping cycle with manual or motorized rope formation (optional)
Reinforcement cycle via push button

FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH”
Film pre-stretch ratio set to 200%
Film tension electronically controlled via control unit
Film specification: Max. outer diameter Ø250 mm – height = 500 mm – core Ø76 mm
Standard connection values: 230 V - 1PH+N+PE - 50/60 Hz
Total power: 1.2 kW / 8A
Optional: Gear for OPRS pre-stretch ratio of 150% / 250% / 300% possible

Further systems available from stock in Ludwigsburg.

Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.