Pallet wrapper turntable stretching

ATLANTA - 25mm flacher Drehteller SYNTHESI - 200% Vorreckung

Rok výroby: 2026, prevádzkové hodiny: 1 h, stav: ako nová (výstavný stroj), Funkcionalita: plne funkčný, číslo stroja/vozidla: S23SynthesiLow04, Demonstration machine, like new. SYNTHESI with a flat turntable Turntable height: 25 mm Short ramp: 500 mm long Manual rope formation at the pallet, mounted on the frame to reinforce the wrapping TECHNICAL DETAILS: Turntable LOW PROFILE · Height: 25 mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · One ramp included Wrapping height (including pallet): 2,200 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed up/down Signal tone at the start of wrapping and end of cycle Emergency stop switch according to CE regulations Turntable always stops in the same home position Crash protection for the film carriage Push button for machine power-on, start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display F00 - Lock display for program changes F02 - Infinitely variable turntable speed 5-12 rpm Carriage speed upwards and downwards adjustable independently F03 - Carriage speed upwards from 1.3 to 5.4 m/min Crjdez Ipnhopfx Afloi F04 - Carriage speed downwards from 1.3 to 5.4 m/min F05 - Number of wraps at the pallet base (1 - 10 wraps) F06 - Number of wraps at the pallet top (1 - 10 wraps) F09 - Photo cell delay for wrapping height F13 - F16 - Film tension for top and bottom wraps / up and downwards independently adjustable F62 - Ergonomic height for film replacement Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable wrapping programs F01 - 1 - Cross wrapping (upwards/downwards) F01 - 2 - Simple wrapping (only up or only downwards) F01 - 3 - Push button for manual functions F10 - F11 - Wrapping cycle with preset start and stop height F12 - Wrapping at a preset height (disabling the photoelectric sensor for height) F22 / F23 - Wrapping cycle for top sheet film F29 - Soft start cycle for applying edge protection F30 - F31 - Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Wrapping cycle with manual or motorized rope formation (optional) Reinforcement cycle via push button FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH” Film pre-stretch ratio set to 200% Film tension electronically controlled via control unit Film specification: Max. outer diameter Ø250 mm – height = 500 mm – core Ø76 mm Standard connection values: 230 V - 1PH+N+PE - 50/60 Hz Total power: 1.2 kW / 8A Optional: Gear for OPRS pre-stretch ratio of 150% / 250% / 300% possible Further systems available from stock in Ludwigsburg.