Balenie paliet Otočný stôl s mierkou

ATLANTA - mit integrierter Waage SYNTHESI - mit Palettenwiegesystem

Exhibition machine, like new.

SYNTHESI with integrated scale
Pallet weighing system integrated in machine

FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE)
Film carriage tension electronically controlled via control unit
Film specification: Max. outer diameter Ø250 mm – Height = 500 mm – Core Ø76 mm
Standard connection: 230 V - 1PH+N+PE - 50/60 Hz

Options available:
Ramp
OPRS film carriage with PreStretch 200%
Turntable 1650 mm
Wrapping height up to 3500 mm

TECHNICAL DETAILS:
Turntable 1500 mm (optional 1650 mm)
Wrapping height (including pallet): 2,200 mm
Height detection by photoelectric sensor
Frequency-controlled turntable drive (soft start/stop)
Frequency-controlled carriage speed, up and down
Acoustic signal at wrap start and cycle end
Emergency stop switch as per CE regulations
Turntable always stops in the same home position
Drop protection for the film carriage
Push buttons for machine power-on as well as start & stop function & reset according to CE standards Ø 22 mm

ADJUSTABLE PARAMETERS VIA CONTROL PANEL
All functional parameters adjustable via display:
F00 - Display lock for program changes
F02 - Infinitely adjustable turntable speed 5–12 rpm
Carriage speed up and down can be set independently
F03 - Carriage speed upwards 1.3 to 5.4 m/min
F04 - Carriage speed downwards 1.3 to 5.4 m/min
F05 - Number of wraps at pallet base (1 – 10 wraps)
F06 - Number of wraps at pallet top (1 – 10 wraps)
F09 - Delay of photocell wrap height
F13–F16 - Film carriage tension for base & top wrap / ascent & descent adjustable independently
F62 - Ergonomic height for film change
Film consumption display (optional)

ADJUSTABLE WRAP PROGRAMS VIA CONTROL PANEL
6 programmable wrap cycles:
F01-1 – Cross wrapping (up/down)
F01-2 – Simple wrap (up or down only)
F01-3 – Push button for manual functions
F10–F11 – Wrapping cycle with predefined start and stop heights
F12 – Wrapping to a programmed height (disables the height photoelectric sensor)
F22/F23 – Wrap cycle for top sheet film
F29 – Soft start cycle for edge protection application
F30–F31 – Wrap cycle with reinforcement and adjustable wrap count
Soft start to reduce film tearing on sharp pallet edges
Wrap cycle with manual or powered rope forming (optional)
Reinforcement cycle via push button

Fjdpsz Ipdvjfx Abwegh
Additional units available from stock in Ludwigsburg.

Inzerát bol automaticky preložený. Chyby v preklade sú možné.