Mobilná balička paliet

ATLANTA - mobiler StretchWickler SFERA Easy PowerStretch 120-400%

Stretch Wrapper ATLANTA SFERA Easy
6 individually programmable wrapping cycles
Wrapping height: 2,150 mm
Mast height: 2,050 mm (fits through almost any standard doorway)
Film power stretch 120–400%
Motorized pre-stretch system with stepless adjustment
Adjustable pre-stretch ratio via control panel from 120% to 400%
Film application tension electronically controlled through control unit
Iiedpferqgivox Aguoh
Quick-load IEF system for simple film roll changes
Film specs: max. outer diameter Ø300 mm, height 500 mm, core Ø76 mm
Film tension can be stored in four steps
Geomagnetic compass GMK, always stops at the position where the cycle started
Manual roping at the film carriage for reinforcement of wrapping

TECHNICAL DETAILS:
Two maintenance-free AGM batteries 12 V – 100 Ah, wired in series
Up to 160 pallets per charge – charging time: 8–10 hours
High-frequency battery charger with LED display
Wrapping height "Machine with mast (pallet included)" 2,150 mm
Height measurement via photoelectric sensor or manual input via display
Safety bar for emergency stop of drive unit
Emergency stop switch compliant with CE regulations
Acoustic warning signal and warning light at machine start-up
Anti-drop device for film carriage
Push buttons for start & stop
Machine operation in accordance with CE standards Ø 22 mm

ADJUSTABLE PARAMETERS VIA CONTROL PANEL:
All operation parameters adjustable via display
F00 – Program change display lock
F02 – Adjustable machine speed around the pallet up to 80 m/min
Carriage up & down speed independently adjustable
F03 – Upwards carriage speed from 1.3–5.4 m/min
F04 – Downwards carriage speed from 1.3–5.4 m/min
F05 – Number of wrap cycles at pallet base (1–10 turns)
F06 – Number of wrap cycles at pallet top (1–10 turns)
F09 – Pallet wrapping height setting
F13–F16 – Film application tension at base & top / ascent & descent can be set independently
F17–F20 – Film pre-stretch base & top / ascent & descent can be set independently
F62 – Ergonomic height for film roll change
Optional display of film consumption (Option for PRS–PS)

PROGRAMMABLE WRAPPING CYCLES VIA CONTROL PANEL:
6 programmable wrapping cycles for SFERA EASY
F01-1 – Cross wrap (upwards/downwards)
F01-2 – Simple wrap (either upwards or downwards only)
F10–F11 – Wrapping cycle with predefined start and stop heights
F12 – Wrapping to preset height (with photoelectric sensor deactivated)
F21 – Wrapping cycle for oversized pallets
F22 / F23 – Wrapping cycle for top sheet application
F29 – Soft start cycle for corner protection application
F30–F31 – Wrapping cycle with reinforcement and adjustable number of wraps
Soft start to reduce film tear on sharp pallet edges
Wrapping cycle with manual or motorized roping (optional)

Additional machines in stock in Ludwigsburg.
Was supplied as a customer replacement unit.
Excellent condition.
Immediately available.
Inspections possible by appointment in Ludwigsburg.

Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.