Širokopásová brúska Bütfering FBS 1300

Bütfering FBS 1300

Stav: použitý, Rok výroby: 2018, Used machine Year of manufacture: 2018 Special feature: Machine suitable for edge heights up to 100 mm! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 support rollers for improved workpiece guidance - Edge infeed synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edge material) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber coating - Digital counter for height adjustment - Direct glue application to the workpiece: Leak-proof glue pot with reserve supply from below and fast heat-up time after machine stop - End trimming unit: - For front and rear edges of the workpiece - Automatic scanning on the workpiece - Pneumatic trimming with knife for cuttable edges - Flush-milling unit: - With vertical sensing and horizontal guidance - Repeatable settings via digital counters - Two powerful 0.4 kW high-frequency motors - Infinitely variable speed from 4,000 to 18,000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - Central extraction port Ø 100 mm - Two chip extraction hoods with Ø 60 mm hoses - Automatic height adjustment of the upper milling cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Extendable workpiece support rail, approx. 300 mm - Rotatable film plate Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400 V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 bar Dimensions (without film plate): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Kedpfxowka S Ij Ac Nedk Availability: short-term Location: Flörsheim

Stav: nový, Rok výroby: 2026, Technické údaje: Kjdpod H Rf Tsfx Ac Nodk • Sací výkon ~5200 m³/h • Výkon motoru: 3,0 kW • Otáčky: 3000 min⁻¹ • Napětí: 400 V, 50 Hz • Sací přípojka: 250/200 mm • Filtrační plocha: 13,7 m² • Rychlost: 28 m/s • Počet filtrů: 28 • Rozměry: 752 x 1982 x 2144 mm • Hmotnost: 300 kg • Kategorie filtru: G • Filtrační materiál: polyester • Hladina hluku: 80 dB bez propojení, 65 dB při připojení k zařízení pomocí potrubí Dodávka zahrnuje: • Odpovídá normě H-2 • Polyesterový filtr, 5 mikrometrů • 2 nádoby • Podvozek • Čištění filtru vibračním systémem s ovládáním + 850 euro za modely s hasicím přístrojem (Safe System)

Stav: použitý, Rok výroby: 1989, Funkcionalita: plne funkčný, Ponorné zariadenie Gebr., výrobca Bachhäubl HS2 12,5 - 12,50 m dĺžka x 1,50 m šírka x 1,50 m výška, svetlé rozmery; - Rok výroby: 1989; Kdedjx Aktwjpfx Ac Nsk - Ovládanie s časovým relé na nastaviteľný čas ponoru. - Drevo s rámom cca 7 m dĺžky, prítlačná lišta so 7 zubmi, cca 7 m dĺžky; - Vnútorná vaňa v dobrom stave, - jednostenná, bez zbernej vane! - Hmotnosť cca 8,5 tony - Prepravné rozmery cca 13,00 x 2,35 x 2,80 m - Zariadenie bez impregnačného prostriedku a bez kalu, - voľné na nakládku na LKW!!

Stav: použitý, Rok výroby: 1989, Použitý stroj Rok výroby: 1989 Stav: Funkčne otestovaný Výbava a technické údaje: Max. hrúbka olepovacieho pásu mm: 20 Max. výška olepovacieho pásu mm: 51 Max. hrúbka materiálu v rolke mm: 3 Min. dĺžka obrobku mm: 140 Kjdow I U E Aopfx Ac Nsdk Min. šírka obrobku mm: 60 Lepidlom systém: 1906 patrona Tlakové zariadenie Frézovacie agregát 1920 na zarovnávanie do 20 mm a skosenie Potrebný priestor D x Š x V mm: 3150x1800x1375 Hmotnosť cca kg: 800 Miesto: Flörsheim Dostupnosť: Krátkodobo

Stav: pripravené na použitie (použité), číslo stroja/vozidla: 03890317, Číslo stroja: 03890317 // Stav a podrobnosti pozri obrázky Kjdpot A A Aqefx Ac Nsdk

Stav: použitý, JEDNOHRIADEĽOVÝ DRVIČ WEIMA MODEL WLK15 HLAVNÝ MOTOR 90KW NOŽE ROTORA 50X50 (NOVÉ NOŽE) DĹŽKA ROTORA 1500MM Kjdpfxetqd Ndo Ac Nodk PRIEMER ROTORA 370MM STROJ JE 100% FUNKČNÝ PRIPRAVENÝ NA PRÁCU

Stav: použitý, No. 3176 WEINIG Hydromat 1000 Planing and Profiling Moulder Used, year of manufacture 2007 6 spindles: bottom-right-left-top-top-bottom Electronic feed 6 – 60 m/min Working width: 80 – 150 mm Working height: 23 – 65 mm Finished lamella width: 4 – 15 mm Max. number of lamellae: 16 pieces Kedou Agh Sepfx Ac Nsdk Lamella lengths: 400 – 4000 mm 1st spindle horizontal bottom Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool cutting circle 125 – 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool cutting circle 112 – 250 mm Max. profiling depth 35 mm Axial adjustment 80 mm 3rd spindle vertical left 7.5 kW, 6000 rpm Diameter 45 mm Tool cutting circle 112 – 250 mm Max. profiling depth 35 mm Axial adjustment 80 mm Pressure shoe in front of spindle, swivelling, pneumatic feed roller pressure 4th spindle horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool cutting circle 112 – 250 mm Max. profiling depth 35 mm Axial adjustment 45 mm Split pressure shoe in front of upper spindle, adjustable and swivelling, pneumatic 5th spindle horizontal top as sawing spindle Brake motor 37 kW, 5000 rpm Diameter 45 mm Axial adjustment reduced to 25 mm Tool cutting circle 112 – 250 mm Max. sawing depth 35 mm Axial adjustment 45 mm Split pressure shoe in front of upper spindle, adjustable and swivelling, pneumatic 6th spindle horizontal bottom as sawing spindle Brake motor 30 kW, 5000 rpm Axial adjustment reduced to 25 mm Diameter 45 mm Tool cutting circle 112 – 250 mm Max. sawing depth 35 mm Axial adjustment 45 mm All profiling spindles with high-performance bearings Electronic feed 7.5 kW Feed roller adjustment opposite left spindle, axial 35 mm Shortened roller spacing to the right-hand spindles Metre counter, electric, with 2 counters Short infeed table (1.2 m) with 2 powered rollers above the table 1 powered, toothed roller in the table, side pressure roller Automatic Waxilit pump/lubricating pump Machine with 4-roller outfeed, oscillating shafts extended to 200 mm 2 powered, toothed rollers in outfeed table 2 powered, toothed rollers in machine table Pressure beam before and outfeed after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electric height adjustment for the upper spindles and feed Machine already dismantled and stored Sale on behalf of customer, ex-location near South Tyrol, without transport and installation Subject to errors in description and pricing Transport and loading by us optionally possible To avoid possible misunderstandings, on-site inspection after appointment is possible and recommended Sale as is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer brochure or previous owner, without guarantee Subject to prior sale No warranty for used machines – sold as inspected Pictures and videos are for sample purposes only and do not represent the actual scope of delivery Terms of payment: prices plus statutory VAT, payment prior to collection or dispatch Delivery terms: ex location

Stav: použitý, Rok výroby: 2018, typ paliva: nafta,

Rok výroby: 2021, stav: pripravené na použitie (použité), Funkcionalita: neoverené, Základný balík Selector 800 Podpás BB 1350 mm AA 6,4 m Kdsdpfxovm Upno Ac Nsk - profilovaný pás - SPIRÁLOVÉ SITO AA254-150 - 16 hriadeľov

Stav: použitý, Rok výroby: 2007, JEDNOHRIADEĽOVÝ DRVIČ WEIMA MODEL WLK15 HLAVNÝ MOTOR 90KW NOŽE ROTORA 50X50 (NOVÉ NOŽE) DĹŽKA ROTORA 1500MM PRIEMER ROTORA 370MM STROJ JE 100% FUNKČNÝ PRIPRAVENÝ NA PRÁCU Kdodpfx Acotqdxfs Njk