Vedro na plevy

BAUER BSK 90

Stav: nový, TC 205 x 1000 CVS Exhibition machine, color: blue Technical specifications: Swing over bed: 410 mm Center height: 205 mm Swing over cross slide: 234 mm Swing in gap: 610 mm Bed width: 280 mm Distance between centers: 1000 mm Number of spindle speeds: 8 Speed range: 80 – 2000 rpm Spindle bore: 58 mm Spindle nose: D1-6 Camlock Spindle taper: MT 6 Tailstock quill travel: 130 mm Tailstock taper: MT 4 Max. tool size: 22 mm Cross slide travel: 225 mm Top slide travel: 130 mm Thread cutting inch: 2 – 72 TPI Thread cutting metric: 0.2 – 14 mm Thread cutting D.P.: 4 – 44 D.P. Thread cutting module: 0.3 – 7 MOD Longitudinal feed: (24) 0.035 – 0.5 mm/rev metric (24) 0.0014 – 0.020 inch Cross feed: (24) 0.017 – 0.250 mm/rev metric (24) 0.0007 – 0.0100 inch Motor power: 3.75 kW Coolant pump: 0.10 kW Weight approx.: 1650 kg Features: - CSS for constant cutting speed - Flange - Fixed steady rest - Splash guard rear panel - 4-position toolpost - Foot brake - Emergency off switch - Coolant system - Chip tray - Fixed center - Change gear set Bodpfx Acevzmtzoyslk - Reduction sleeve for main spindle - Machine pads - Operating tools - Operating manual

Stav: takmer ako nový (použitý), Funkcionalita: plne funkčný, Weiler Commodor lead and feed screw lathe with 3-axis digital readout K&C, COMPLETELY OVERHAULED with acceptance protocol for new machine tolerances Technical Data: >> Machine No.: 2268-87 >> Centre height: 180 mm >> Centre distance: 1000 mm >> Spindle speeds: 13 to 2000 rpm >> Spindle bore: 56 mm >> Short taper spindle nose DIN 55029 Camlock >> Tailstock: Morse Taper 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Thread types: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: 0.35 to 12 mm >> Weight: approx. 1500 kg Blsdjymznhopfx Acysk >> Spindle brake switchable >> Drive power: 2.0/4.0 kW >> Dimensions (LxHxW): 2.2 m x 1.5 m x 1 m Accessories and Equipment: >> 3-axis digital readout K&C, new, 12-month manufacturer's warranty with manual >> NEW 200 mm 3-jaw chuck, 2 sets of jaws >> Multifix size B with 3 NEW toolholders >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp Safety features include: >> Electronic spindle guard >> Spindle brake >> 2 emergency stops Optional: Lead and feed screw covers available upon request About the machine: Offered here is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The guideways have been newly ground or hand-scraped. Acceptance as per inspection protocol. Painted in 2K high-gloss white. The Multifix toolpost and chuck are new. For safety: The machine features a brake motor, electronic spindle guard and two emergency stop buttons - an absolutely as-new-condition lathe. Even at high speeds, the Weiler runs very smoothly. This latest generation of Weiler lathes is exceptionally user-friendly and capable of producing ground-like surface finishes. Take advantage of the opportunity to view and test the machine under power on site and see the condition for yourself.

Stav: použitý, Rok výroby: 1979, Swing diameter over bed: 480 mm Swing diameter over cross slide: 200 mm Bedpfxjdmbrxj Acyolk Turning length: 650 mm Maximum workpiece diameter over bed cover: 200 mm Distance between centers: 750 mm Spindle head: Size 6 Spindle bore: 58 mm Total power requirement: 18 kW Machine weight approx.: 2.7 t Space requirement approx.: 2.70 x 1.58 x 1.68 m CNC path control, 2 axes, SINUMERIK 5T with threading function, tailstock quill taper Morse 4, maximum quill stroke 200 mm, tailstock offset 550 mm Control cabinet: 80 x 40 x 230 cm, weight: 150 kg Motor control cabinet with Siemens 810T Dimensions (W/D/H): 80 x 90 x 100 cm, weight: 200 kg 4x plates + Spax screws + sheet metal screws Drilling machine, drill bits

Stav: použitý, Zrovnávacia a hrúbkovačka Scheppach HMC3200, rok výroby 1993, v dobrom stave, 2,9 kW, šírka stola 320 mm, dĺžka stola 1380 mm, hmotnosť 150 kg Bodpex H Ugxefx Acyjlk Zmena ceny vyhradená, právo na omyly, tlačové a sadzebné chyby vyhradené.

Stav: veľmi dobrý (použitý), Rok výroby: 1990, Make: Kunzmann Model: WF5/3 Year of manufacture: 1990 X-axis travel: 500 mm Y-axis travel: 360 mm Z-axis travel: 420 mm Clamping surface: 700 x 350 mm Tool holder: SK40 Spindle bore: 22 mm Quill stroke: 60 mm Bedpfxoffyfro Acyolk Dimensions (approx.): W 1.50 x D 2.40 x H 1.90 m Weight (approx.): 1.6 t All information is provided without guarantee. The machine is in very good condition. A demonstration is possible at any time in our showroom.

Stav: nový, Mobilná regálová pojazdná plošinová rebrík. Mobilný plošinový rebrík Mega-M STANDARD zaručuje bezpečnú prácu vo výškach a komfortné používanie. Je to skvelé riešenie pre všetkých, ktorí hľadajú odolný, funkčný, stabilný a predovšetkým bezpečný pracovný plošinový rebrík. Pojazdný rebrík Mega-M STANDARD je kompaktný a robustný produkt, vďaka čomu je ideálny na všetky skladové práce. Umožňuje bezpečné vyberanie a ukladanie tovaru na regáloch a napríklad aj dokončovacie práce. Výhody pojazdného regálového rebríka Mega-M STANDARD: - Celokovová konštrukcia z kvalitnej ocele - Zábradlia uľahčujú výstup a zostup - Široká plošina pre stabilnú pracovnú pozíciu - Ochranné zábradlie okolo plošiny pre maximálnu bezpečnosť - Dve pevné a dve otočné kolieska s brzdou Ponuka sa týka skladových rebríkov: Kód produktu: MTP004353 Počet stupňov: 4 Maximálne zaťaženie (kg): 200 Výška (cm): 195 Výška po plošinu (cm): 100 Výška zábradlia (cm): 95 Rozmer plošiny (cm): 44×52 Cena: 245,00 euro/kus Kód produktu: MTP004354 Počet stupňov: 6 Maximálne zaťaženie (kg): 150 Výška (cm): 245 Výška po plošinu (cm): 150 Výška zábradlia (cm): 95 Rozmer plošiny (cm): 54×52 Cena: 289,00 euro/kus Kód produktu: MTP004355 Počet stupňov: 8 Maximálne zaťaženie (kg): 200 Výška (cm): 295 Výška po plošinu (cm): 200 Výška zábradlia (cm): 95 Rozmer plošiny (cm): 74×56 Cena: 415,00 euro/kus Kód produktu: MTP004356 Počet stupňov: 10 Maximálne zaťaženie (kg): 200 Výška (cm): 345 Výška po plošinu (cm): 250 Výška zábradlia (cm): 95 Rozmer plošiny (cm): 74×56 Cena: 539,00 euro/kus Blodpsu T Dr Hefx Acyok Kód produktu: MTP004357 Počet stupňov: 12 Maximálne zaťaženie (kg): 200 Výška (cm): 395 Výška po plošinu (cm): 300 Výška zábradlia (cm): 95 Rozmer plošiny (cm): 74×56 Cena: 685,00 euro/kus Uvedené ceny platia pri odberoch väčšieho množstva na export mimo Poľska, prosíme o kontakt kvôli detailom. Pre overenie veľkoobchodných a maloobchodných cien v Poľsku nás prosím kontaktujte. * K dispozícii veľké množstvá. * Možná preprava do celej Európy. * Uvedená ponuka nezahŕňa náklady na dopravu. * Poloha: Chmielów/Tarnobrzeg, Poľsko.

Stav: nový, Rok výroby: 2026, Thread cutting device OLED display LED lighting Blodod Su Agspfx Acyjk Continuous/Standard drilling capacity (mm) - R1 30/35 mm - R2 27/32 mm Maximum thread cutting capacity: - R1 M30x3.5 - R2 M24x3 Spindle Morse taper IV Drilling depth (mm): 160 Throat (mm): 300 Column diameter (mm): 140 Usable table area (W x D) (mm): 590 x 450 Digital speed display Digital drilling depth display Drilling depth stop with fine adjustment Table height adjustment via rack and pinion Spindle/table distance (mm): 150-700 Machine dimensions without chip tray (mm): 610 x 900 x 1,980 mm Machine dimensions with chip tray (mm): 670 x 1,100 x 2,200 mm Three-phase motor 400V with frequency inverter (kW): 4.0 Infinitely variable spindle speeds R1 (1-stage) 0-1000 rpm R2 (1-stage) 0-1600 rpm Manual feed Weight (kg): 400 Optional drilling package 6 (€910.00 plus VAT): - [felix] 2.0 150 machine vice - Morse taper arbor MK IV/B18 - Reducing sleeve MK IV/MK II - Reducing sleeve MK IV/MK III - Keyless drill chuck B18 3-16 mm (accuracy 0.17 mm) Free delivery within Germany, including packaging! NOT THE RIGHT MACHINE? WE ALSO OFFER OTHER FLOTT PRODUCTS – REQUEST A QUOTE! FLOTT AUTHORIZED DEALER

Stav: nový, Rok výroby: 2026, Thread cutting device Free cutting device Programmable drilling depth cut-off Drill depth and speed display – digital Thread cutting device M30 (pitch-dependent) Option R1: Continuously variable spindle speeds with intermediate gear, speed range 100-2000 rpm Option R2: Continuously variable spindle speeds with intermediate gear, speed range 70-1400 rpm Drilling capacity 35/40 mm Spindle taper MK 4 Drilling depth 160 mm Throat depth 300 mm Usable table surface (swiveling) 590 x 450 mm Feed 0-300 mm/min, stepless Table height adjustment with rack and pinion Machine dimensions (W x D x H): 610 x 850 x 1920 mm Motor – three-phase, 400 V, pole-changeable, 1.5/3.0 kW Weight 420 kg Blodpfx Ajd H Rh Recysk Option Drill Package No. 6: Morse taper shank B18/MK 4, Keyless drill chuck B18/3-16 mm, Machine vice No. 2-140 and T-slot bolts, 910.00 EUR Option: automatic spindle stop at drill spindle top position, 432.00 EUR Option: chip breaking module, 432.00 EUR Delivery: free to your door including packaging (Germany only) Warranty: 3 years NOT THE RIGHT MACHINE? WE ALSO OFFER OTHER FLOTT PRODUCTS – ASK FOR AN OFFER! FLOTT AUTHORIZED SERVICE PARTNER

Stav: nový, Rok výroby: 2026, Digital drilling depth and spindle speed display Thread cutting capacity: M20 (depending on pitch) Infinitely variable speed from 125 to 4000 rpm in two ranges, range selection via belt change. Drilling capacity: 25/30 mm Thread cutting capacity (depending on pitch): M20 Spindle: MT 3 Drilling depth: 125 mm Throat: 280 mm Usable table surface (tiltable): 420 x 340 mm Hand feed Table height adjustment: rack and pinion Machine dimensions (W x D x H): 520 x 820 x 1900 mm Motor: Three-phase current 400 V, pole-changeable, 0.9/1.45 kW Weight: 275 kg OPTION 1 – €625.00 Drilling package 4 consisting of: - Vice [felix] 2.0 – 120 mm, clamping width 0-168 mm - Keyless drill chuck, B18 mount, 3-16 mm (accuracy 0.17 mm) Taper shank MT 3 B18 and reducing sleeves MT3 to MT2, and MT3 to MT1 OPTION 2 – €1,245.00 Thread cutting device, max. M20, thread cutting depth can be set via digital depth display Delivery: FREE to destination, including packaging Factory warranty: 3 years Bsdpfx Acjd H Rffoyolk NOT THE RIGHT MACHINE? WE ARE AN AUTHORIZED FLOTT DISTRIBUTOR AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! REQUEST A QUOTE!

Stav: nový, Rok výroby: 2026, Standard Equipment: - Thread cutting device - Control panel with OLED display - Robust, high-quality drill head cover - LED lighting - Rapidly adjustable and ergonomic drilling depth stop - Infinitely variable speed control via rotary knob - Thermal overload protection - Spindle stop - Drill guard with electrical interlock - Connection cable with CEE plug Bledpfx Ajlfdufocyek - Mechanical feed of the Z-axis - Includes electromagnetic clutch for 3 feed rates - Drill cross with push button - In thread cutting mode: forward/reverse TECHNICAL DATA Continuous/Conventional drilling capacity (mm) R1 - 30/35 (in E335/ST60) R2 - 27/32 (in E335/ST60) R3 - 35/40 (in E335/ST60) Max. tapping capacity: R1 = M30x3.5 / R2 = M24x3 / R3 = M36x4 Spindle: MK IV Drilling depth: 160 mm Throat: 300 mm Column diameter: 140 mm Usable table area (W x D): 590 x 450 mm Digital speed display Digital drilling depth display Drilling depth stop with fine adjustment Table height adjustment with rack and pinion Spindle/table: 150-700 mm Infinitely variable spindle speeds: R1 (single stage) 0-1,000 rpm R2 (single stage) 0-1,600 rpm R3 (two stage with intermediate gear) 0-4,000 rpm Choice of R1 or R2 at no extra cost Price surcharge for R3: €2,250 Accessory Drill Package 6 (€910.00) - [Felix] 2.0 150 machine vice - Taper shank arbor MK IV/B18 - Reduction sleeve MK IV/MK II - Reduction sleeve MK IV/MK III - Quick-action drill chuck B18 3-16 mm (accuracy 0.17 mm) WARRANTY: 3 years (single shift operation) DELIVERY: free to your door, incl. packaging NOT THE RIGHT MACHINE? WE ARE AN AUTHORIZED FLOTT DISTRIBUTOR AND CAN OFFER YOU ANY PRODUCT FROM THE FLOTT RANGE! REQUEST AN OFFER!