Gilotínové nožnice - hydraulické

BAYKAL HGL 3100 x 6

Stav: použitý, Rok výroby: 2000, Sheet width: 3060 mm Sheet thickness: 6.0 mm Sheet thickness (stainless steel): 4.0 mm Frame opening: 3100 mm Hold-down devices: 16 units Strokes: 20 strokes/min Oil capacity: 160 ltr. Shearing angle: 1.6° Control: ELGO Operating hours: ~ 1,100 h Total power requirement: 11.0 kW Weight: 5,250 kg Dimensions (L x W x H): 3,800 x 1,940 x 1,560 mm From a maintenance workshop With only approx. 1,100 operating hours (!!) Equipment: - Electro-hydraulic swing beam shear - ELGO NC control unit * For electric backgauge * Input of target/actual position values possible - NC electro-motorised backgauge * Backgauge travel X = 750 mm * Backlash-free ball screw spindle for backgauge * Travel speed 100 mm/sec - Electric cutting length limiter * Cutting length limitation increases strokes per minute - Manual blade gap adjustment via eccentric - Jog mode with push buttons on left control panel - Front support tables with ball rollers - Front finger/hand guard Nledpfexacfaox Aaroa - 1x side stop with T-slot & millimetre scale - 2x front support arms - Original operating manual including CE declaration

Stav: nový, Instead of €14,874 gross (RRP), now only €9,499 net (€11,304 gross incl. 19% VAT). You save 24% off the RRP! Straightening Press 150 tons with electric motor and additional manual operation via a hand lever pump, especially suitable for precision work. Available versions: 30t 60t 100t 150t 200t >200t: on request Custom machines: on request Brand new machine! We are also happy to build a custom press to your specifications. High-quality hydraulic workshop press with a maximum pressing force of 150 tons. The press can be operated conventionally in electric mode via a lever for up and down movement. For precision tasks (e.g. pressing bearings, straightening, etc.), the press is also equipped with a hand pump, allowing fine manual control of the pressure. The pressure cylinder is mounted on a sliding carriage, so it can be shifted sideways, allowing you to fully utilize the maximum frame width. Key features: - 150 tons maximum pressing force - Pressure gauge included - 2 operating modes: electric or manual - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety features - Adjustable daylight opening - Lifting chains for easy adjustment of the opening height - Heavy-duty machine frame - Cylinder laterally adjustable (mounted on a sliding carriage) Nsdpsf Sqckofx Aarsla The press can be tested under power on site. ----- Numerous other workshop presses available in various designs, sizes, and with optional accessories! 30, 60, 100, 150, 180, 200 tons. ----- Please feel free to contact us for professional and non-binding advice. The specified price is net plus 19% VAT. All information subject to change! Europe-wide delivery possible! ----- The European Commission provides a platform for out-of-court online dispute resolution (OS platform). This offer serves solely as an online presentation of our goods. Contract negotiations are conducted via telecommunications (email, fax, phone, messaging portal), during which we first provide you with a non-binding offer and also inform you about our terms and conditions and the right of withdrawal, including our legal notice, before any purchase or contract is concluded.

Stav: veľmi dobrý (použitý), Indexovací přístroj Walter Typ UPA 125 N (28487) Přímé a nepřímé dělení Výška hrotu 125 mm Použitelný horizontálně i vertikálně Upnutí vřetena MK 4 KKG 3 Pojezd SPH 125 mm Upnutí MK 2 Nljdpotrnndjfx Aarsa Přepravní hmotnost celkem 62 kg Váha indexovacího přístroje 48 kg

Stav: nový, Vzdialenosť medzi hrotmi ----- 1500 mm Výška hrotov ----- 230 mm Priemer sústruženia ----- 460 mm Priemer prievlaku hlavného vretena ----- 80 mm Šírka lôžka ----- 336 mm Otáčky vretena ----- 25-1800 ot./min Motor ----- 5.5 kW ŤAŽKÉ PREVEDENIE - HMOTNOSŤ 2650 KG ZAHRNUTÉ Nsdpfx Aaoh U Nztjrola * 3-osové digitálne odčítanie značky SINO * Rýchlovýmenný nožový držiak typu Multifix TOOB2 so 4 vložkami * 3-čeľusťové skľučovadlo 250 mm * 4-čeľusťové skľučovadlo 320 mm * Upínacia doska 350 mm * Pevná a pohyblivá luneta * LED pracovné svetlo a chladiaci systém * Elektrická brzda CE * Kufor s rôznym príslušenstvom

Stav: dielensky repasované (použité), Rok výroby: 2001, Funkcionalita: plne funkčný, číslo stroja/vozidla: 3595, Dear Ladies and Gentlemen, For sale is a Weiler Commodor B lathe, year of manufacture 2001, equipped with a Heidenhain 3-axis digital display. The machine has undergone extensive partial overhauling in our workshop. Among other things, the main spindle bearing as well as the feed/lead screw bearing have been completely renewed! Technically, geometrically, and visually, the machine is in excellent condition, which you are welcome to verify on-site. Availability: on request Machine no.: 3595 Year of manufacture: 2001 Centre height: 180 mm Centre distance: 1000 mm Spindle bore: Ø 56 mm Max. spindle speed: 2000 rpm Tailstock taper: MT4 Feed range: 0.026 – 0.888 mm/rev Possible thread types: metric, imperial, module, diametral pitch Nlsdpfx Aajthd Shorea Metric thread pitches: 0.35 – 12 mm Spindle brake: switchable Connected load: 4 kW Dimensions: approx. 2.2 x 1.5 x 1 m (L x H x W) Weight: approx. 1.8 t Further equipment and accessories: 3-axis digital display, coolant system, chuck guard, pull-out chip tray, Röhm 3-jaw chuck, Röhm 4-jaw chuck, various clamping jaws, etc. Our service promise to you: - We are a certified master enterprise in mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul the selected machine - On request, we can repaint the selected machine in your desired color - On request, you can order additional accessories such as tools directly - On request, we can install further accessories such as safety devices - We are happy to assist with shipping and/or installation

Stav: nový, Funkcionalita: plne funkčný, Gear-driven milling and drilling machine Fervi T047/400VDA with tapping function 400V 1.5kW BRAND NEW “CE” MANUFACTURE Special price – only one available while stocks last. The machine is suitable for: - Milling - Drilling - Tapping Drilling capacity in cast iron (with pre-drilling): ø 40 mm Maximum drilling capacity in steel (with pre-drilling): ø 32 mm Milling capacity with indexable insert cutter: ø 80 mm Milling capacity: ø 25 mm Tapping capacity: ø 22 mm Taper: MT 4 Spindle stroke: 130 mm Quill diameter: ø 76 mm Column diameter: ø 115 mm Head tilt: ± 60° Spindle speed (12 steps): 75 – 3200 rpm Three-phase motor: 400 V 50 Hz 1.1 – 1.5 kW Table size: 585 x 190 mm T-slot: 12 mm Base size: 648 x 412 mm Overall dimensions: 740 x 790 x 1960h mm Nlodeg Npiwjpfx Aarja Weight: 390 kg

Stav: nový, Univerzálna frézka Značka: OPTimill Model: MT 50 Katalógové číslo: 3336005 Stav: Nový stroj Nlodpfx Aajbnfxusrja Pojazdy: - Os X 580 mm - Os Y 200 mm - Os Z 340 mm Štandardne vybavená: - 3-osý digitálny odpočet DPA 31 PLUS - Automatický posuv v osi X - Dlhý frézovací trn 16 mm - Dlhý frézovací trn 22 mm - Upínanie skľučovadla B 18 - Ozubené vrtacie skľučovadlo 3-16 mm/B 18 - Redukčná puzdro MK 2 s vyražacou štrbinou - Redukčná puzdro MK 3 s vyražacou štrbinou - Strojové svetlo - Zariadenie na chladenie - Ovládacie náradie - Návod na obsluhu

Rok výroby: 1960, stav: dobrý (použitý), číslo stroja/vozidla: 970015, Nosnosť pri horizontálnom postavení upínacej dosky: 10 t Nlodecblc Sepfx Aarja Nosnosť pri vertikálnom postavení upínacej dosky a vzdialenosti ťažiska 300 mm: 10 t Nosnosť pri vertikálnom postavení upínacej dosky a vzdialenosti ťažiska 830 mm: 5,5 t Rozmery upínacej dosky: 1500 x 1500 mm Otáčky upínacej dosky hydraulicky plynulo nastaviteľné: 0,025 - 0,75 ot/min Rozsah naklápania: 0 - 135° Čas naklápania v celom rozsahu hore: 140 s Čas naklápania v celom rozsahu dole: 120 s Hydraulický pohon: 380 V Výška osi naklápania nad podlahou: 1450 mm Potrebný priestor: 3800 x 1950 x 1800 mm Hmotnosť cca: 3,5 t Hmotnosť protizávažia: 2,3 t

Stav: použitý, Rok výroby: 1998, Cutting capacity at 90 degrees: round 250 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular Saw blade length: 2,965 x 27 x 0.9 mm Table height: mm Blade speed: 37 / 76 m/min Total power requirement: 1.0 kW Machine weight approx. 0.38 t Space requirement approx. 1.0 x 1.6 x 1.4 m Nodpfx Aaeu Sbpvsrela Double mitre band saw

Stav: použitý, CNC cycle-controlled lathe HARRISON Type Alpha 400 Plus Machine No. P30180/150 Year of manufacture: 1998 Centre distance: 1250 mm Swing over bed: 400 mm Centre height: 200 mm Swing over cross slide: 245 mm Swing in gap: 585 mm Bed width: 313 mm Cross travel (X-axis): 250 mm Tailstock quill diameter: 73 mm Tailstock quill travel: 140 mm Tailstock quill taper: MT 5 Spindle bore: 54 mm Spindle nose: Camlock D1 Size 6 Spindle speed: 20–2500 rpm Spindle speed ranges (Stage 1): 15–275 rpm Spindle speed ranges (Stage 2): 35–795 rpm Spindle speed ranges (Stage 3): 110–2500 rpm Feed rate X and Z: 0.03–0.6 mm/rev. Rapid traverse X-axis: max. 2000 mm/min Rapid traverse Z-axis: max. 4000 mm/min Thread cutting function: Metric / Inch / Diametral / Module Spindle drive power: 7.5 kW Electrical connection: 400 Volt, 50 Hz, 23.5 kVA - Cycle control: Harrison Alpha / GE FANUC – Language: French (France) - Automatic 3-range gearbox (15–275, 35–795, 110–2500 rpm) Nledpfx Aoh Hvk Ajaroa - Electronic handwheels with multiple resolution factors (1/10/100) - 3-jaw scroll chuck FORKARDT Ø 250 mm Type CSN, 1 set soft top jaws - MULTIFIX size B quick-change tool post with 2 tool holders - 1 live centre - 1 RÖHM keyless drill chuck, 3–16 mm - Hinged chuck guard - Hinged workspace safety doors - Chip tray with coolant device under machine bed - Fixed electrical cabinet on machine - RS 232 interface Required space (L x W x H): 2600 x 1450 x 1550 mm Weight: 1950 kg Good condition