Obrábacie centrum s olepovaním hrán

Biesse Rover A Edge 1632

Numerical control BH 660 with BIESSE BSolid software
bEdge module for edge management
bSolid surface design
Sophia – IoT connectivity
Office control
Working range in X-axis: 3228 mm
Working range in Y-axis: 1580 mm
Working range in Z-axis: 200 mm with suction cups H74 mm
Working range in Z-axis: 245 mm with suction cups H29 mm
8 adjustable ATS panel support bars
Installation of pneumatic clamping, divided into two Y-zones
6 pneumatic Bakelite bars for panel lifting
3 adjustable suction cups for the bar
Setup assistant for suction cups
1 electrospindle (pantograph) with 4 axes, automatic tool changer, 13 kW motor (17.4 HP), liquid cooling, HSK taper connection, 20,000 rpm
Automatic tool changer with 16 positions on the X-axis carriage
The independent Tesa boring spindles BH17 are arranged as follows:
Gusdpfsugpwnsx Aa Tji
5 independent spindles for vertical drilling in the X direction
5 independent spindles for vertical drilling in the Y direction
4 spindles for horizontal drilling in the X direction
2 spindles for horizontal drilling in the Y direction
1 saw blade integrated in the drilling head, diameter 120 mm (usable cut 25 mm)
GU60L gluing unit for EVA adhesive with pre-melter – edge pressure system with double rubberized roller for spokes,
Maximum inside diameter 30 mm and sensor for edge bonding – 500 ml glue pot mounted on the glue roller – edge pre-heating lamp – edge feed system – edge cutting system – manual edge feeding possible
Plastic edge thickness: 0.4 to 3 mm
Wood edge thickness: 0.4 to 2 mm
Laminate edge thickness: 0.4 to 1.2 mm
Maximum edge width: 65 mm
Workpiece thickness: 10 to 60 mm
Minimum workable inner radius with edge processing: 30 mm
Maximum outer radius for edging, proportional to edge thickness and rigidity:
* 10 mm with edge thickness up to 1 mm
* 20 mm with 2 mm edge
* 30 mm with 3 mm edge
Minimum dimension of edged panel: 300 x 300 mm
Minimum inner diameter for edging: 350 mm with plastic edge thickness less than 1 mm and with panel maximum thickness 18 mm
Edge magazine with 2 positions in safety enclosure for edges up to 65 mm maximum thickness
Finished-component cleaning station with automatic dispensing of special cleaning fluids and cleaning cycle
1 unit for rounding/chamfering edges
1 combined unit EF60A trimmer/scraper
Perimeter safety fence
Chip extraction system with motorized conveyor belt
Liquid cooling system
Automatic lubrication system
1 vacuum pump with 250 m³/h capacity
TECHNICAL DATA TO BE CONFIRMED

Inzerát bol automaticky preložený. Chyby v preklade sú možné.