Obrábacie centrá s konzolovým stolom

BIESSE ROVER A S 1325 UTS

Stav: použitý, Rok výroby: 2011, Base machine M800 X5 TV 1 WORKING AREA X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made of thick-walled steel. It is reinforced over the entire machine bed with welded-in components, making it extremely rigid. The table design used, with a large base, is the key to ensuring long-term precision and stability. The machine layout allows the user an optimal workflow with minimal space requirements. The mobile gantry is constructed as a solid monoblock. It is positioned in the X-direction on prismatic, ground rails via recirculating ball-bearing carriages. On this mobile unit carrier, the working unit is again mounted on prismatic, ground guides and ball-bearing carriages. AXIS MOVEMENT All axis displacement is carried out on prism linear guides with large cross-sections and recirculating ball carriages with a large contact surface, guaranteeing optimal movement even at the highest speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via a helical pinion and rack system. Recirculating ball screws with a large cross-section ensure accurate positioning of the working unit along the moving gantry (Y- and Z-axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Isdpsxy Tmnefx Afzsat Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumpers and light barrier 1 Bumpers with sensors are installed around the movable gantry, and a light barrier system is installed in front of the machine. If the operator enters the active zone, the axis speed of the X-axis is reduced to a lower value of 25 m/min without stopping the machine. The system allows workpieces to be loaded during pendulum operation without the disadvantageous access restrictions found in pressure mat systems. This prevents unwanted interruptions to the machining cycle and allows greater freedom of movement around the work table. CE certificate for the safety system 1 Safety guard 1 Side and rear protective fencing Automatic central lubrication system regulated via CNC controller 1 Lubrication of the X, Y, and Z axes is regulated via the CNC controller at regular intervals without manual intervention on the machine. Central extraction nozzle 1 All individual extraction nozzles of the machining units are combined into one central nozzle. Within the nozzle, various slide valves are controlled via the NC controller. This reduces the required extraction airflow. Chip conveyor 1 Maxi - 5-axis electrospindle 11 kW HSK-63 "Prisma K 1 5-axis electrospindle delivering 11 kW at 20,000 rpm (S1, 100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F 18 kW inverter for stepless, uniform power delivery Max. rotation: B-axis = 200° (+/- 100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to execute complex horizontal positioning in a small workspace. This allows the machining of complex geometries without the risk of collision.

Stav: nový, Rok výroby: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only affordable and space-saving. It also features the equipment you need to process perfect edges from the very beginning: diamond-tipped jointing cutters ensure excellently prepared workpieces for edge banding. The equipment includes a jointing unit (up to 2 mm cutting depth), a top-mounted quick-heating glue pot, a trimming saw, and a combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: F2 – 10 m/min Edge banding machine F2 next Iodpfx Afolht Hzjzjat With PLC control (including touchscreen) and application of hot-melt adhesive to the workpiece for edge material up to 3 mm; jointing cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change basin setup including glue discharge device, high-frequency trimming saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and indexable insert cutter (combination design), robust chain feed, ball-bearing double roller top pressure, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 chassis F2/30 pneumatic 3-point adjustment (radius, chamfer, flush milling)

Stav: použitý, číslo stroja/vozidla: 007716, Working area X-axis: 3250 mm Working area Y-axis: 1220 mm Worktable: With vacuum console supports Main spindle power: 12 kW Iaodpewuz N Nofx Afzet Number of controlled axes: 4 axes Number of drilling spindles: 18 Number of tool positions: 16

Stav: veľmi dobrý (použitý), CNC INFOTEC obrábacie centrum Model: 2515 5 osí Rok výroby: 2018 Iodpfx Aeun Rqgjfzoat Rozmery pracovnej plochy stroja pre osi Xi-Y: X 2100 mm, Y 3100 mm Zdvih hlavy v osi Z: 1250 mm Rýchlosť pohybu stroja X, Y, Z: X: 80 m/min, Y: 80 m/min, Z: 12 m/min Vákuový stôl BECKER čerpadlo HITECO vreteno s upínaním v štandarde HSK 63F

Stav: pripravené na použitie (použité), Rok výroby: 2009, Pojazdy pracovného priestoru 1: X: 6450 mm, Y: 1535 mm, Z: 250 mm, pracovný priestor 2: X: 6200 mm, Y: 1535 mm, Z: 250 mm, pracovný priestor 3: X: 6200 mm, Y: 1520 mm, Z: 275 mm. Osi - posuvy konfigurácia 1: X: 6820,5 mm, Y: 1963 mm, Z: 350 mm; konfigurácia 2: X: 6820,5 mm, Y: 1963 mm, Z: 350 mm; konfigurácia 3: X: 6820,5 mm, Y: 1963 mm, Z: 663 mm (5-osová hlava), Z: 350 mm (prídavné obrábacie jednotky). Riadenie: Biesse XP600. Iaodpjylziiofx Afzet Servis: v roku 2015 bola kompletne vymenená os C vrátane príslušenstva; v roku 2016 bola kompletne vymenená vákuová pumpa vrátane mechov, hadíc a ďalších prvkov; v roku 2021 bol stroj vybavený novým výkonným riadiacim PC s aktuálnym operačným systémom Windows 10. K dispozícii je obsiahla dokumentácia. Obhliadka na mieste je možná.

Stav: použitý, Rok výroby: 2005, Rozmery spracovania: 3000 x 1600 x 180 mm Vysokotlakové čerpadlo 60 PS / 45 kW Model E-60 Pracovný tlak 4.130 BAR Spotreba vody 4,69 litra/min. Softvér Watercad-CAM Automatická optimalizácia rezu Isdsxgfbqopfx Afzsat Skladové miesto: Zákazník

Stav: veľmi dobrý (použitý), Portalová obráběcí linka Pohyblivý panel, pohyblivá pracovní hlava (horizontální obrobek) Numerické řízení Power Control, software WoodWOP Bezpečnostní kabina pracovní hlavy. Kompletní opláštění stroje pro ochranu Vstupní podávací stůl (podpěra obrobku). Výstupní stůl (s transportním pásem) Pohon obrobku třemi transportními pásy (posuvná rychlost (m/min) max. cca 130) Minimální rozměry obrobku (X-Y-Z) mm: 250 x 100 x 15 Maximální rozměry obrobku (X-Y-Z) mm: 2500 x 1050 x 60 Motorizovaný pásový dopravník pro odvoz odpadu Samostatný elektrický a řídicí rozvaděč. Celkový instalovaný výkon (kW): 99 2 PRACOVNÍ JEDNOTKY (HORNÍ) – (SERVOMOTOR X-Y-Z): 4 vrtací agregáty (4 x 2,3 kW) s 10 svislými vřeteny každý (celkově 40 svislých vřeten) Iedpfxegwbbqo Afzoat 3 PRACOVNÍ JEDNOTKY (SPODNÍ) – (SERVOMOTOR X-Y-Z): 6 vrtacích agregátů (6 x 2,3 kW) s 40 svislými vřeteny každý (celkem 240 svislých vřeten) 2 PRACOVNÍ JEDNOTKY (HORIZONTÁLNÍ) 2 vrtací agregáty s horizontálními vřeteny 21 horizontálních vrtacích vřeten (pravá strana) + 21 horizontálních vrtacích vřeten (levá strana) 8 vstřikovacích trysek pro nanášení lepidla a vkládání kolíků (pravá strana) 8 vstřikovacích trysek pro nanášení lepidla a vkládání kolíků (levá strana) 2 zásobníky na kolíky pro automatické vkládání kolíků VOLITELNÉ: Čárový kód (bezdrátový skener)

Stav: použitý, Rok výroby: 1986, Počet výtlačkov: 24 miliónov Max. tlačová rýchlosť hárkov: 8 000 za hodinu Max. formát hárku: 36 x 52 cm Navlhčovací systém: Crestline Iaodpfxjwplrqj Afzst

Stav: veľmi dobrý (použitý), Rok výroby: 2015, Predám 4 kusy CNC ROVER BIESSE 2231. Rok výroby: 2013, 2014, 2015, 2016. Vo veľmi dobrom stave. Isdpsx Tbk Rofx Afzeat

Stav: pripravené na použitie (použité), Rok výroby: 2021, pojazdová vzdialenosť osi X: 4 000 mm, zdvih osi Y: 1 670 mm, zdvih osi Z: 500 mm, počet osí: 4, This 4-axis CNC machining centre was manufactured in 2020. It features a 12 kW milling spindle with a speed range of 1000–24,000 rpm and a C-axis rotation of 0–360°. The machine is equipped with a 12-position linear tool changer and a comprehensive drilling head with 16 spindles. Additionally, it offers a robust safety system with a light barrier. Take advantage of this opportunity and purchase this Felder Format 4 Profit H 200 CNC machining centre. Contact us for further information about this machine. • Automatic central lubrication • Working area: X 3300 mm / Y 1280 mm / Z 250 mm (clearance height from console level depends on clamping system) • Operator terminal on the left machine side • Handheld terminal with axis speed control and emergency stop • Software: Woodflash (CNC panel, tool database, program editor) Iasdpfx Afjx D D Hmjzet • Position display for workpiece support and vacuum pods • Vacuum connection for template routing (left side), connection diameter 12 mm • Vacuum pump: 1x, total suction capacity 90 m³/h @ 50 Hz or 108 m³/h @ 60 Hz • Milling spindle: 12 kW (S6), HSK F63, 1000–24,000 rpm, full rated power at ~12,000 rpm, air-cooled; C-axis 0–360° • Tool changer: 12-position linear on the left side of the machine frame, incl. storage space for aggregates; max. tool diameter 250 mm; max. tool length 240 mm • Drilling head DH 16 4H 2S: 12 vertical spindles (7X / 5Y); 4 horizontal spindles (2X / 2Y); stroke 70 mm; drilling depth 70 mm; shank Ø 10 mm • Grooving saws: 2 (one X, one Y); max. blade Ø 120 mm; max. thickness 5 mm; infinitely variable speed up to 7,500 rpm • Safety: Front light barrier system