Zásobník s hydraulickou posuvnou podlahou a drvičom vriec

BRT HARTNER GmbH HP5-3035

Technical data for input bunker with hydraulic moving floor and bag opener for recyclables from yellow bags, commercial waste, and residual waste:

Manufacturer: BRT HARTNER GmbH
Model: HP5-3035
Year of manufacture: 2015
Bunker capacity: 30 m³
Drive power: 17.5 kW
Dimensions (current state): 13,200 x 3,050 x 4,350 mm (L x W x H)

Machine Condition:
The input bunker with bag opener was operated in a large recycling facility, where recyclables from yellow bags or commercial waste were tipped into the bunker by wheel loaders, bags were opened by the bag opener, and materials were conveyed in a metered flow to a sorting plant or further processing. The unit operated flawlessly until it was dismantled and replaced with a larger, higher-capacity system. The machine was dismantled into components, partially overhauled, reassembled in our workshop, and function-tested during operation.

The following overhaul work and replacement parts were completed:
- Dismantling the input bunker and bag opener into separate components. Cleaning, partial sandblasting, priming, and painting of steel parts.
- Various wear and protective plates were newly fabricated and installed.
- Removal of worn ends (approx. 40 cbm) of the moving floor pipes. Welding and smoothing of new pipes onto the moving floor.
- Replacement of all sliding plastic plates for the hydraulic moving floor.
- Dismantling of the hydraulic unit from the moving floor, draining hydraulic oil tank, replacing oil filters, refilling with new hydraulic oil.
- Replacement of the three hydraulic blocks, all valves, oil sight glass, and all hydraulic hoses from the hydraulic unit.
- All three hydraulic cylinders of the moving floor received new seal kits and hoses.
- All six limit switches (proximity sensors) on the moving floor were replaced.
- Conveyor chains left and right of the scraper conveyor were replaced.
- Seven scraper bars of the scraper conveyor were replaced.
- The drive motor for the bag opener blades was replaced.
- All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and fittings were replaced.
- All sliding plastic plates for hydraulic movement of the bag opener were replaced. The bag opener can be adjusted in depth, allowing operation with or without bag opening for commercial or residual waste.
- Side collision protection plates were replaced on both sides.
- Various wear parts of the bag opener were renewed.
- Entire electrical wiring and connections were replaced.
- Control system in the control panel was reset by BRT Hartner to autonomous single control and the standard program reloaded.
- The system was commissioned and tested by BRT Hartner (see function video).

Notes:
Documentation (operation manual, CE declaration, electrical/hydraulic diagram) is available. Inspection possible by appointment. We assume no liability for technical data or potential errors.
Fjdsyizxrjpfx Ad Njga

Inzerát bol automaticky preložený. Chyby v preklade sú možné.