Rotačná lamelová výveva

Busch Huckepack HO 437

Stav: nový, Rok výroby: 2024, tlak: 8 lišta, Horizontal mitre adjustment 15°–90°–15° stepless, saw motor 5.50 kW (400 Volt), saw blade 600 mm, rear stop travel range 180 mm, working height adjustable 940 to 1000 mm via levelling feet, 2 extraction ports (above in the hood & below), net weight 600 kg, WxDxH 135x140x150 cm, RAL 9007 grey aluminium. Turntable made of ground nickel steel, saw head with ball bearing guides designed for high precision, long service life, and high rigidity. Saw material can be pre-clamped with low pressure when hood is open. Hydropneumatic blade feed. Chip flow directed to extraction hood. Equipment • Precision under-table circular saw • Mitre adjustment 0º/ 45º/ 90º/ -45º / -60º stepless • Includes 2 pneumatic vertical clamps Fpjdpogwt S Tefx Afmsb • Steplessly adjustable blade feed • Two-hand safety control • Adjustable rear material stop • Chip extraction system for chip extraction unit • Mist spray unit for air-oil cooling • Air gun with spiral hose • Maintenance unit with pressure reducer included • Ergonomically arranged control panel • Max. cutting height 230 mm • Saw blade 600 mm • Saw blade not included in delivery! Our NC pusher system ensures that your workpieces are positioned at the required processing position on our UK 600 HA 90°. A gripper clamp holds the material, and the NC control automatically positions it. The clamping and sawing process is then triggered. Positions are pre-programmed in the system control. Once the machine tool has completed the operation, it automatically moves to the next sawing position. Depending on the workpiece, several parts can also be clamped above/beside each other and positioned simultaneously. You can inspect the desired system at any time in our production/showroom. Please feel free to contact us for an appointment. Plantec Maschinen GmbH

Stav: pripravené na použitie (použité), číslo stroja/vozidla: 64532, použitá ručná hydraulická ohýbačka rúr k dispozícii ohýbacie segmenty: 3/8, 3/4, 1 1/4 a 2" Fpsdpfjdzw Hwsx Afmob Potrebný priestor: 850 x 640 x 780 mm

Rok výroby: 2023, Stav: nový, Full-automatic orbital stretch wrapper SPINNER 1000s Application: Packaging, grouping, and protection of long or bulky products such as furniture, doors, wood panels, etc. Operator side: - right-hand side in direction of product flow General technical data: - Main motor power: 1.5 kW - Max. ring rotation speed: 80 rpm - Min. ring speed: 10 rpm - Electronic control components: Siemens, Schneider, LS - Total weight: 770 kg Standard equipment: - Powered conveyor belt (infeed and outfeed) for automatic product feeding - Adjustable ring rotation speed - Adjustable stretch tension with mechanical braking system - Automatic stretch film clamping and cutting system - Automatic film attachment system - Pneumatic front and rear hold-downs pressing from above during cutting to stabilize the product - Photoelectric sensor for automatic start of the wrapping process - Touch screen for adjusting machine parameters to product requirements - Operator safety systems Optional equipment: - Various conveyor types - Infeed and outfeed rollers - Bubble wrap unit Technical features: Wrapping sizes: - Max. length: unlimited - Min. length (WxHxL): 100x18x550 mm Conveyor functions: - Usable length: 1924 mm - Total length: 2000 mm - Working height: 900 mm - Electric motor power: 0.75 kW - Max. speed: 12 m/sec - Load capacity: 100 kg/m Fjdpfx Afofuwg Iomepb Stretch film features: - Max. width: 200 mm - Max. diameter: 230 mm - Core diameter: 76 mm - Recommended film thickness: 23, 30, 35 micron

Stav: nový, Rok výroby: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total power requirement: 1.2 kW Warm Air Furnace MARTINA 55 The MARTINA warm air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed for heating large functional spaces such as workshops and work areas in commercial and industrial companies. These warm air systems do not require long heat-up phases and can heat up workshops or production facilities, such as joineries and carpentries, in a very short time. Acceptable fuels include solid wood and its derivatives, e.g. remnants of solid wood panels, wood chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37EC, the Italian Presidential Decree No. 459 of July 24, 1996, and with the safety requirements of Directive 89/392 EC. All warm air furnaces of the MARTINA series – 15, 30, 55, 85, 120, 180, 240, 350 – satisfy both emission stages as stipulated by the requirements of the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic and continuous air operation - Rated thermal output: 49.9 kW Fpjdsvz Hq Hjpfx Afmjb - Thermal output in kcal: 43,000 - Fuel consumption: 15 kg/h - Air output: 4900 m³/h - Combustion chamber depth: 650 mm - Loading door: 370 x 350 mm - Warm air fan: 1.12 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable space: approx. 1,000 m³ - Heatable area: approx. 220 m² - Required installation space: width 720 mm, depth 1000 mm, height 1900 mm - Weight: 300 kg - Flue pipe diameter (outlet): 160 mm - Chimney diameter (reference): 200 mm - Efficiency: 85-90% - Recommended chimney draft: 13 Pa - Flue gas temperature: 290°C - Warm air outlet connections: 2 x Ø 200 mm - For further data, please refer to the attached data sheet The 2 duct connectors for the outgoing warm air are located at the rear of the furnace in the lower section. A maximum of 20 meters of ducting per connector is permitted for air distribution.

Stav: veľmi dobrý (použitý), Volt: 220-240VAC // Ampéry: 1,8 // Hz: 50/60 // Fáza: 1 // kW: 0,4 S VÝSTUPNÝM DOPRAVNÍKOM Obtokové pásy: Pri formáte obálky 10,5 x 14,8 cm a pri orientácii na výšku je potrebné obtokové pásy posunúť smerom k stredovému dopravníku. Pravidlo: Pre veľké obálky tlačiť obtokové pásy smerom von, pre malé obálky obtokové pásy (22) tlačiť dovnútra. PRIPOJENIE K TLAČIARSKEMU STROJU STENZ FEEDER nevyžaduje synchronizáciu. Podávač sa privedie k tlačiarenskému stroju pomocou rukovätí a požadovaná výška sa nastaví kľukou. Dôležité: Zadné kolieska sa zaistia až po nastavení výšky tlače a skontroluje sa stabilita. Fpodsh Eibajpfx Afmjb Zapnite zariadenie a začnite tlačiť. Pre hárkové tlačiarenské stroje (GTO) nastaviteľný sklon. Bezproblémová tlač obálok môže začať. Vyvinuté pre náročné použitie pri maximálnej tlačovej rýchlosti. Kompatibilné so všetkými tlačiarenskými strojmi 36 x 52 bez ohľadu na podávací systém (prekryvný alebo jednofarebný podávač listov). - Nevyžaduje žiadne mechanické úpravy na tlačiarenskom stroji. - Synchronizácia podľa laserovej technológie nie je potrebná. - Veľmi krátky čas nastavenia umožňuje ekonomické využitie od 1 000 obálok - Jednoduchá obsluha - Konštrukcia podávača zabezpečuje vynútené prekrytie listov. Výkon podávača Stenz nie je obmedzený - Minimum opotrebiteľných dielov pre mimoriadne dlhú životnosť - Schválené už v tisícoch rôznych tlačiarenských strojov - Švajčiarska kvalita - Navrhnuté tlačiarmi pre tlačiarov Špecifikácie: Rýchlosť: Obmedzená tlačiarenským strojom Dĺžka: 115 cm Šírka: 50 cm Výška: nastaviteľná Max. veľkosť formátu: 36,5 x 35 cm Max. priechodná šírka: 36,5 cm Elektrické pripojenie: 230 V, 50 Hz

Rok výroby: 2003, Stav: dielensky repasované (použité), Stock no. 2651 1 used, partially refurbished in 2023, underwater pelletizing system Throughput up to approx. 450 kg/h, depending on material, comprising: Type BKG (Nordson) Start-up valve with hydraulic station Granulator type A300 incl. die plate and cutter bar, 4.4 kW drive Fpsdeiyyf Ispfx Afmeb Bypass system TVE 1000 ED pellet dryer, 4 kW drive included Agglomerate catcher tempered water system with 200-liter water tank, installed heating capacity 9 kW Water pump 2.2 kW with 15 m³/h Heat exchanger Control unit Additional UWG pelletizing systems available ex works Wuppertal (Gala, BKG Nordson, Econ) Available from stock in Wuppertal: complete compounding and pelletizing lines, with single-screw or twin-screw extruders.

Stav: nový, Rok výroby: 2025, celková dĺžka: 1 600 mm, celková šírka: 2 200 mm, celková výška: 2 350 mm, celková hmotnosť: 250 kg, typ vstupného prúdu: trojfázový, pracovná šírka: 1 400 mm, Paint booth, spray wall, extraction unit TQN1414 With right- or left-side exhaust outlet. Working dimensions (mm): 1400 (W) x 1400 (H) x 800 (D) Overall dimensions (mm): 1600 (W) x 2350 (H) x 1250 (D) SPECIFICATION: • Fan power: 1.5 kW • Capacity: 6,500 m³/h • 2 x 100% polyester filters • Filtration efficiency of 99.9% • IP 66 control panel • Automatic filter cleaning • Hermetically sealed lighting, IP 65 • Paint tank Booth immediately available (in stock) CHOOSE BUMEX SP. Z O.O. High-quality machines among those offered on the market. Professional consulting and service. Warranty. Warranty and post-warranty service. Complete technical documentation. 100% customer satisfaction. All BUMEX SP. Z O.O. products are EC-certified. We offer our own transport – prices are determined individually for each order. We issue invoices with VAT shown separately. Short delivery times! Fedpfx Aod S N I Njfmspb Possibility to order machines in various individual configurations and dimensions! Please contact us.

Stav: generálne opravený (použitý), RA250D kyslíková verze, bez tuku, zmontovaná a naplněná Fomblinem. Kompletně generálně opravená, 0,5 mbar, 250 m³/h, ihned k dodání ze skladu. Aktuálně máme skladem několik kyslíkových vakuových pump. Fpjdpfx Aod R Trnefmeb

Rok výroby: 2008, Stav: veľmi dobrý (použitý), Skrutková pumpa Výrobca: Busch Typ: Cobra DS 600 E Fodped Rafbefx Afmjpb Stav: vo veľmi dobrom stave Dostupnosť: ihneď zo skladu

Stav: ako nová (výstavný stroj), ATEX CERTIFIED PUMP Rotary vane vacuum pump in oil bath. Available in stock. Fully overhauled pump. Comes with warranty. Fpedjftzgxepfx Afmsb Nominal flow rate: 30 m3/h at 50Hz. Ultimate vacuum: 1x10^-3 mbar abs. For any questions, please contact us.