Preťahovanie stroj-interné - vertikálne

CARDINAL

Stav: pripravené na použitie (použité), pohotovostná hmotnosť: 22 000 kg, Typ FTC75 Vzdialenosť medzi hrotmi: 8000 mm Obežný priemer nad lôžkom: 1500 mm Obežný priemer nad suportom: 1100 mm Nedpfewkw Umox Ab Aowp Priemer hlavného vretena: 130 mm Počet rýchlostí: 3,6 > 720 ot/min Celkový potrebný výkon: 29,5 kW / 40 k Maximálna hmotnosť obrobku medzi hrotmi: 11 t

Stav: použitý, Rok výroby: 2014, Swing diameter over bed: 508 mm Turning length: 724.5 mm Control: Hurco Ultimax Swing diameter over cross slide: 336 mm Spindle speeds – stepless: 0–4500 rpm Spindle bore: 65 mm Nedsv T Np Aspfx Ab Aswp Feed rates: 0–30 m/min Rapid traverse (X and Z axis): 30 m/min Operating voltage: 400 V Connected load: 30 kVA Cross slide travel: 203.2 mm Longitudinal travel: 580/640 mm Space requirements: approx. 4.3 x 2.1 x 2.6 m Tool speeds: 0–5000 rpm Tool drive power: 5.5 kW Main drive motor: 15/22 kW Machine weight: approx. 5.6 t C-axis: 360 x 0.001° Equipped with a 12-position turret with driven tool stations (C-axis), sub-spindle, power chuck, coolant system, and chip conveyor. Control: Hurco Ultimax. Supplied with extensive accessories.

Stav: dobrý (použitý), Rok výroby: 1990, CNC kruhová brúska Výrobca: TSCHUDIN Typ: HTG 22 - 862 Rok výroby: 1990 s riadením MARPOSS E14 a meracou riadiacou jednotkou E5. Vzdialenosť medzi hrotmi: 650 mm Výška hrotov: 100 mm Brúsna dĺžka: 620 mm Hmotnosť: cca 4 500 kg Nsdjid Aphepfx Ab Aewp Ďalšie technické údaje nájdete v TECHNICKOM DÁTOVOM LISTE. S mnohými brúsnymi kameňmi a upínacími prípravkami. Kompletná dokumentácia k stroju je k dispozícii. Stroj sa nachádza na sklade.

Rok výroby: 1962, Stav: použitý, číslo stroja/vozidla: 1790, Manufacturer: Karl Klink Model: RW 5 Year of manufacture: 1962 Weight: approx. 2,500 kg Machine No.: 1790 General / Technical Data: Hydraulic horizontal internal broaching machine in good, operational condition Broaching stroke: 1,320 mm Broaching positions: 1 unit Pulling force: 5,000 kg at 3 m/min (3,000 kg at 7 m/min) Broaching tool clamping: universal pull head for flat shanks Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. 420 mm (limited by oil and chip tray) Cutting speed: hydraulically infinitely variable from 1 m/min to 7 m/min Nwedpfx Abjdl Uzko Aop Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 4,600 mm x 600 mm x 1,900 mm (without work area) Power supply: 380 Volt / 50 Hz / 15 A Hydraulic motor: 4 kW Accessories / Special equipment: • The machine is fitted with a universal pull head for flat shanks • Coolant / lubrication system • Without automatic tool feeder • Short oil and chip collection tray (approx. 900 mm) Remarks: The machine is ideal for manufacturing keyways. Broaching tools and pull mandrels can be supplied upon request. The machine is powered up and ready for demonstration in our warehouse.

Stav: použitý, Podrobnosti na požiadanie. Nwedpfodgxnyox Ab Ajp

Stav: použitý, X-travel: 600 mm y-travel: fixed mm z-travel: 650 mm Nodecxxrgjpfx Ab Aewp Machine weight approx.: total 0.124 t Space requirement approx.: 0.7 x 1.0 x 1.05 m Surface measuring, testing, and evaluation device for roughness and waviness parameters, with measuring stand and feed unit, including recording device with profile memory and fully digital measurement data processing, fully programmable. Evaluation according to various evaluation programs with just one measurement cycle; reference plane measurement for poorly aligned curved and inclined surfaces; automatic correction for height offset and inclination. Measurement programs are permanently stored and quickly accessible; user-friendly controls. Universally adaptable thanks to pluggable program modules for special functions. Measuring stand PST-Se: large base plate made of black granite with one 14 mm T-slot, table 650 x 450 mm. Feed unit PRK: adaptable precision long-range pickup device for roughness, waviness, and form measurement; traverse distance 1.5 - 60 mm; guiding accuracy 2 µm; traversing speed 0.5 and 0.1 mm/s, automatically adjustable; return speed 1.5 m/s; standard, interval, and end-contact operation. Comprehensive accessories: interchangeable styli, stylus height adjustments, stylus holders, styli, etc.

Stav: pripravené na použitie (použité), Wheel diameter – max. 150 mm Wheel width – max. 200 mm Module – max. 4 Module – min. 1 Control unit: Sinumerik 840 D Table diameter: 140 mm Axial adjustment – max. 200 mm Cutter mounting: ISO 40 Max. cutter diameter: 130 mm Max. cutter length: 220 mm Cutter speed – stepless: 300 – 1200 rpm Max. cutter traverse: 170 mm Milling head swiveling: +/- 45° Feed rate: 1 – 1500 mm/min Rapid traverse speed: 3000 m/min Nodpfjvzhg Nex Ab Aewp Max. workpiece diameter (in magazine): 150 mm Total power requirement: 50 kW Machine weight: approx. 8.5 t Space requirement: approx. 4.7 x 3.6 x 2.6 m Used CNC gear hobbing machine, manufacturer: Pfauter, year of construction: 1992, completely overhauled in 2013 by the specialist company SerWeMa, equipped with Siemens Sinumerik 840 D control and workpiece magazine. This is a used machine, therefore we sell under exclusion of any warranty.

Stav: dobrý (použitý), Rok výroby: 2007, - SIEMENS 840 D control system - Bar capacity: 65 mm - Main and sub spindle with rotational speed: 5,000 rpm - C-axis, Y-axis - 3 turrets, each with 12 stations (all driven) - Driven tool speed: 4,000 rpm - Tool holder: VDI 30 with drive according to DIN 5480 Nwodpfx Aeuw Izvsb Asp TRAVELS X1 = 165 mm, Z1 = 220 mm X2 = 165 mm, Z2 = 150 mm X3 = 165 mm, Z3 = 650 mm, Y3 = 80 mm (+50/-30) ACCESSORIES Coolant system Chip conveyor Bar feeder TOP Automazioni XF 375

Stav: veľmi dobrý (použitý), Rok výroby: 2016, Funkcionalita: plne funkčný, celková výška: 13 450 mm, celková šírka: 4 135 mm, celková dĺžka: 3 092 mm, nosnosť na skladovaciu sekciu: 400 kg, vstupné napätie: 400 V, nosnosť: 400 kg, Automatizovaný systém pro optimalizaci skladování Schäfer Logimat Typ systému: Logimat 3625 – 815 – 13.450/400 Sériové číslo: 916.0480-B2 (Logimat 5) Rok výroby: 2016 Celková nosnost: 2 x 30 000 kg Nosnost na polici: 400 kg (rovnoměrně rozloženo) Rozměry police: 3625 x 815 mm Počet polic: cca 91 kusů Dotyková obrazovka: 15,6 palce Rozměry zařízení (Š x H x V): 4135 x 3092 x 13 450 mm Napájení: 400V-50Hz, 3L/N/PE, 24 A, 17 kVA Tato nabídka platí do vyprodání zásob. Technické detaily každého systému Logimat: - Maximální celková kapacita Schäfer Logimat: 2 x 30 000 kg - Maximální kapacita police: cca 91 polic, každá 400 kg, rovnoměrně rozložených - Rozměry police: 3625 x 815 x 100 mm - Hmotnost prázdné police: 70 kg - Rozměry stroje (Š x H x V): 4135 x 3092 x 13 450 mm - Zastavěná plocha systému: cca 12,8 m² - Kapacita s 91 policemi: cca 269 m², každá police cca 2,95 m² - Průměrná doba vychystání police: 26 s - Maximální doba vychystání police: 26 s - Průměrná doba výměny police: 51 s - Maximální doba výměny police: 72 s - Hmotnost zařízení bez polic: 5 200 kg Další vybavení: - Systém LogiTilt - Systém LogiPointer - Systém LogiGate - Systém LogiStainless Zařízení bylo profesionálně demontováno a může být opět odborně smontováno stejnými techniky. Fotografie a videa z provozu a demontáže na vyžádání e-mailem Cena: speciální exportní cena Cena: bez DPH Dodací lhůta: skladem K dispozici máme 3 kusy Schäfer Logimat skladem. Machinehandel De Leeuw BV je specialista na použité paternoster systémy značek Kardex, Hanel / Haenel, Electrolux, Bertello, Megamat, Lista, Denocard a automatizované skladové systémy jako Kardex Shuttle XP a XPlus. Nwodporu A Atofx Ab Aep Machinehandel De Leeuw BV Oordeelsestraat 7 – b 5111 PA Baarle-Nassau Nizozemsko

Stav: nový, Cutting diameter round: 230 mm Cutting diameter square: 230 x 230 mm Saw band length: 2950 x 27 x 0.9 mm Table height: mm Band speed: 15 – 100 m/min Total power requirement: 2.2 kW Machine weight: approx. 1.2 t Dimensions (L x W x H): m SHARK 230-1 NC HS 5.0, electrohydraulic double-column fully automatic bandsaw with semi-automatic function for 0° cuts in construction steel, stainless steel, steel alloys, solid material, and profiles, with a maximum remnant piece length of 60 mm. - The maximum section is 230 x 230 mm. - Numerically controlled bandsaw with the new, Windows “CE”-based software platform developed by MEP especially for automatic operation. FEATURES: - User interface with 7” touchscreen display and mechanical keys for machine operation, ensuring reliable operation, simple and intuitive use, and real-time monitoring of all cutting parameters. - Safety enclosure in accordance with the latest safety standards of the Machinery Directive EN 13898/2007. Nwsdpfxofg E Hye Ab Asp - New fieldbus communication system with dual microprocessor and serial connection. - Robust cast iron (G25) frame for vibration compensation, improved machine stability, and increased saw band life.