CNC sústružnícko-frézovacie centrum

CMZ TTL-66-66-T1Y-T2Y

Stav: takmer ako nový (použitý), Rok výroby: 2021, Funkcionalita: plne funkčný, This multi-axis turning machine CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power of 35.5 kW. Psdpfx Aexmhdnefkjpl The two powerful spindles with a 66 mm bar passage, two turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm. Y-axis available on both upper and lower turret. The machine is equipped with a 35-bar high-pressure coolant system, including a filtration system and an additional tank. For more details about this lathe, please refer to the attached brochure or contact us directly. Equipment: - LPS for left spindle - Reducing tube for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for right spindle - Tool presetter - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75μm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75μm filter - Coolant washing nozzle - TA/06000/10 coolant chiller unit, 8000W - Machine status light - Tool life management - Tool load monitoring - Programmable, automatic parts catcher (pneumatic) - The workpiece conveyor is fitted with a gripper that opens and closes pneumatically to remove finished parts - Pneumatic ejector for sub-spindle with 100mm adjustable stroke; end position detected by sensor - Coolant supply through right spindle - Bar feeder interface (unimag) - Preparation for extraction system, connection flange Ø100 The machine comes equipped with a chip conveyor, coolant unit, and tool package. It is under power and can be inspected at any time, available immediately. Operated in single-shift only. Further information available on request.

Stav: takmer ako nový (použitý), Rok výroby: 2022, prevádzkové hodiny: 850 h, Funkcionalita: plne funkčný, dĺžka sústruženia: 610 mm, sústružnícky priemer nad priečnym suportom: 500 mm, sústružnícky priemer: 725 mm, maximálna rýchlosť vretena: 5 000 ot./min, otvor vretena: 65 mm, pojazdová vzdialenosť osi X: 260 mm, zdvih osi Y: 80 mm, zdvih osi Z: 610 mm, rýchloposuv os X: 30 m/min, rýchly posuv osi Y: 15 m/min, rýchloposuv osi Z: 30 m/min, dĺžka posuvu os X: 260 mm, dĺžka posuvu osi Y: 80 mm, dĺžka posuvu osi Z: 610 mm, krútiaci moment: 250 Nm, prechod tyče: 65 mm, Výbava: dokumentácia / manuál, otáčky plynule nastaviteľné, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year of manufacture 2022, equipped with a Siemens Sinumerik ONE control system featuring ShopTurn! CNC turning center for complete machining of turned/milled parts. - Integrated spindle motors - Counter spindle, water-cooled (preloaded roller guides) with Y-axis - On main/counter spindle - Latest control technology: SINUMERIK ONE with ShopTurn conversational programming Main spindle: • Max. bar capacity: 65 mm • Max. torque: 250 Nm • Speed range: 0–5000 rpm Counter spindle: • Drive power: 22 kW • Max. torque: 130 Nm • Speed range: 0–7000 rpm Tool turret: • 12-station VDI 30 radial turret with directional logic for up to 12 driven tool holders - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-axis • Travel: +/- 40 mm • Hollow clamping cylinder incl. draw tube • C-axis for main / counter spindle • Sinumerik ONE / OPERATE control • 22" multi-touch display • SHOPTURN • 3D simulation • Remainder material detection • USB interface • Control cabinet air conditioning • Coolant system incl. coolant pump (3.5 bar) • Chuck washing (additional pump 3.5 bar) • Parts ejector and flushing through counter spindle Pjdox E Dncopfx Afkopl Hydraulic unit • Interface for chip conveyor • Documentation and CE certificate Control language: German / English Electronic handwheel EMCO TOOL BREAKAGE AND WEAR MONITORING / SINUMERIK ONE Alternate spindle speed COUNTER SPINDLE AS TAILSTOCK This cycle allows the use of the counter spindle with a mounted live center for supporting workpieces. This enables shaft parts to be supported and machined in machines without a tailstock by utilizing the counter spindle. The max. contact force is limited to 50% of the max. axis force. EMCO PROFI-NET ROBOT INTERFACE - Interface for robot integration via HARTING connector - Signal exchange via Profinet - Safety signals: 2-channel/potential-free Digitization package for Sinumerik - Condition monitoring - SIEMENS ONE interface for connection to MDE/BDE systems Standard with the following information: • Machine on – AUX ON • Automatic operation • Production mode – program active • Program running and override between 95 and 105% • Piece count pulse (M30) • Programmable pulse (M300) 3D MACHINE DATA / MT65-G2 3D data model of the machine included Pneumatically operated finished part catcher for gentle unloading: Finished parts can be transported to a catch box (standard) or onto a conveyor belt (optional) Max. finished part length: 175 mm Max. finished part diameter: 65 mm Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000 For connection to EMCO’s SL1200 short bar loader. ...etc. Machine is immediately available!

Stav: veľmi dobrý (použitý), Rok výroby: 2012, Funkcionalita: plne funkčný, pojazdová vzdialenosť osi X: 3 500 mm, zdvih osi Y: 1 100 mm, zdvih osi Z: 1 500 mm, rýchloposuv os X: 40 m/min, rýchly posuv osi Y: 40 m/min, rýchloposuv osi Z: 40 m/min, otáčky (max.): 7 000 ot./min, výkon motora vretena: 34 W, Výbava: dokumentácia / manuál, otáčky plynule nastaviteľné, Použitá pojazdná stojanová frézka s CNC H. TNC-530 Psdpfsxyw Tfox Afkspl

Rok výroby: 2001, Stav: použitý,

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Vyložení nad ložem: 1290 mm Vyložení nad suportem: 910 mm Vyložení v mezeře (délka: 500 mm): 1580 mm Vzdálenost mezi hroty: 6000 mm Průměr vřetenového otvoru: 155 mm Otáčky vřetena: 6–800 ot./min Upínací čelo vřetena: ASA A2 11" Obrobek mezi hroty: 20 t Kužel v koníku: Mk6 Pjdowc Nzpjpfx Afkopl Podélný posuv: 0,045–5 mm/ot. Příčný posuv: 0,022–1,5 mm/ot. Metrické závity: 0,5–56 mm Modulové závity: 0,25–28 modul Whitworth závity: 1/2–84/" Výkon motoru vřetena: 30 hp Rok výroby: 1971 Délka: 9500 mm Šířka: 2000 mm Výška: 1600 mm Hmotnost: 13400 kg Sony DRO podélný suport 3 ks lunet Upínací deska Samosvorné čtyřčelisťové sklíčidlo Kalené vodicí dráhy Elektrický posuv suportu

Stav: dobrý (použitý), Rok výroby: 2000, Funkcionalita: plne funkčný, vŕtacia kapacita: 40 mm, ťah perom: 200 mm, priemer pinoly: 80 mm, Machine Version • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots, 18 mm, at the rear of the machine base • 2 T-slots, 18 mm, on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 T-slot spacing mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – min mm 70 Table top max. mm 680 Distance spindle nose – min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Psdpfx Aou Aa I Ssfkspl Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Infinitely variable feeds mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axes over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat panel, backlit, easily readable from all sides, 215 x 160 mm Position display: Cartesian or polar, values absolute or incremental Unit: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram technology: yes Machining Cycles Standard software options: Conversational programming, 38 zero point shifts, rotation and mirroring, teach-in for X,Y,Z, program restart with selective re-entry Zero point determination: Cycles for zero point determination by manual probing of the workpiece for: - Freely mounted rectangular parts - Freely mounted round parts - Positioning of cast and flame-cut parts - Angle detection by probing reference edges/surfaces on round parts Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, sústružnícky priemer: 1 000 mm, dĺžka sústruženia: 8 000 mm, celková dĺžka: 10 500 mm, Na predaj je použitý sústruh talianskeho výrobcu Leopolod Pontiggia, model NH 500. Technické špecifikácie: Priemer sústruženia nad lôžkom: 1 000 mm Dĺžka sústruženia: 8 000 mm Obsiahla výbava podľa fotografií: Pedpfx Afsv Epigokepl 1 x trojčeľusťové skľučovadlo 1 x štvorčeľusťové skľučovadlo 1 x luneta + rôzne adaptéry

Rok výroby: 2019, Stav: pripravené na použitie (použité), A Spinner simultaneous turning center with three turrets, including extensive accessories, spare parts, and tooling, is available. Axes travel X1/X2/X3: 180 mm, travel Y1/Y2: +/-45 mm, travel Z1/Z3: 704 mm, travel Z2/E2: 620 mm/720 mm, rapid traverse X/Y/Z: 30 m/min, acceleration: 0.5 g. Spindle 1: speed: 5,000 rpm, nose: A6, bore: 65 mm, chuck diameter: 210 mm, power: 18 kW, torque: 115 Nm. Spindle 2: speed: 700 rpm, nose diameter: 110 mm, bore: 42 mm, max. chuck diameter: 140 mm, max. jaw weight: 1.25 kg, power: 16.6 kW, torque: 100 Nm. Turrets 1/2/3: turret stations: 3x12, rpm: 8,000, tool interface: BMT 45, power: 4.3 kW, torque: 13.6 Nm. Machine dimensions X/Y/Z: approx. 2880 mm / 2130 mm / 1990 mm, weight: approx. 7,500 kg, operating hours: 27,102 h, control: Fanuc 31i. Includes Top Automazioni bar feeder, coolant/high-pressure system with 80 bar, chip conveyor, fire extinguishing system, a comprehensive tooling package, and additional spare parts. Documentation available. On-site inspection possible. Ppedpsua E Trefx Afkol

Stav: použitý, CNC cycle-controlled lathe HARRISON Type Alpha 400 Plus Machine No. P30180/150 Year of manufacture: 1998 Centre distance: 1250 mm Swing over bed: 400 mm Centre height: 200 mm Swing over cross slide: 245 mm Swing in gap: 585 mm Bed width: 313 mm Cross travel (X-axis): 250 mm Tailstock quill diameter: 73 mm Tailstock quill travel: 140 mm Tailstock quill taper: MT 5 Spindle bore: 54 mm Spindle nose: Camlock D1 Size 6 Spindle speed: 20–2500 rpm Spindle speed ranges (Stage 1): 15–275 rpm Spindle speed ranges (Stage 2): 35–795 rpm Spindle speed ranges (Stage 3): 110–2500 rpm Feed rate X and Z: 0.03–0.6 mm/rev. Rapid traverse X-axis: max. 2000 mm/min Rapid traverse Z-axis: max. 4000 mm/min Thread cutting function: Metric / Inch / Diametral / Module Spindle drive power: 7.5 kW Electrical connection: 400 Volt, 50 Hz, 23.5 kVA - Cycle control: Harrison Alpha / GE FANUC – Language: French (France) - Automatic 3-range gearbox (15–275, 35–795, 110–2500 rpm) - Electronic handwheels with multiple resolution factors (1/10/100) - 3-jaw scroll chuck FORKARDT Ø 250 mm Type CSN, 1 set soft top jaws - MULTIFIX size B quick-change tool post with 2 tool holders - 1 live centre - 1 RÖHM keyless drill chuck, 3–16 mm - Hinged chuck guard - Hinged workspace safety doors - Chip tray with coolant device under machine bed - Fixed electrical cabinet on machine Psdpfx Afsh Hvk Aokepl - RS 232 interface Required space (L x W x H): 2600 x 1450 x 1550 mm Weight: 1950 kg Good condition

Stav: generálne opravený (použitý), Rok výroby: 2025, Funkcionalita: plne funkčný, číslo stroja/vozidla: 7/61, Origin výroby: Švýcarsko Napětí: 380/50/3 Čistá hmotnost: cca 760 kg Celní zařazení: 8459.2930 Vnější rozměry: cca 1250x1000x1700 mm TECHNICKÉ ÚDAJE: PRACOVNÍ ROZSAH Pohyby v ose X a Y: 200 x 200 mm Vertikální zdvih pinoly: 250 mm Délka zdvihu vrtací vřeteno: 70 mm Max. průchod mezi stolem a čelem vřetena: 330 mm Vzdálenost mezi sloupem a osou vřetena: 260 mm Max. vrtací kapacita (do oceli): 10 mm Max. vrtací průměr: 50 mm STŮL Využitelná plocha: 400 x 300 mm Nosnost: do 100 kg Pohyby v ose X a Y: motorizované Počet T-drážek: 6 (podélných) VRTACÍ HLAVA Vnitřní kužel vřetena: Morse 0 Otáčky vřetena, plynule nastavitelné: 150–3000 ot./min Posuv vřetena: 0,015 mm/ot. Měřící systém: přímý, optický Měřicí prvky: gradované měřítko, dělení 1 mm Odečítání: displej Posuv nulového bodu: ano Přímé odečítání: 0,001 mm Zaručená přesnost polohování: 0,002 mm Instalovaný výkon: 1,2 kW Technické údaje jsou poskytovány bez záruky správnosti či úplnosti. Inventární číslo 2160006, stroj vybaven: 1 otočný stůl Ø 220 s optickým měřením 1 centrovací mikroskop s trojbodovým závěsem, zvětšení 40x, osvětlení 1 centrovací zařízení se číselníkovým úchylkoměrem, kapacita 3 mm, MK0 1 centrovací hrot MK0 1 dotyková sonda s pružinovým hrotem MK0 Podpfx Afod Amgkskepl 1 důlčík MK0 1 sklíčidlo pro centrovací vrták MK0 1 samosvorné vrtací sklíčidlo 0–5 mm, MK0 1 vyvrtávací hlava typ 0, kapacita 0,5–30 mm, MK0 1 nivelační patka se 2 kulovými nivelačními podporami