Teplovzdušná rúra

Compactsystem MARTINA 85

Stav: nový, Rok výroby: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total power requirement: 1.2 kW Warm Air Furnace MARTINA 55 The MARTINA warm air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed for heating large functional spaces such as workshops and work areas in commercial and industrial companies. These warm air systems do not require long heat-up phases and can heat up workshops or production facilities, such as joineries and carpentries, in a very short time. Acceptable fuels include solid wood and its derivatives, e.g. remnants of solid wood panels, wood chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37EC, the Italian Presidential Decree No. 459 of July 24, 1996, and with the safety requirements of Directive 89/392 EC. All warm air furnaces of the MARTINA series – 15, 30, 55, 85, 120, 180, 240, 350 – satisfy both emission stages as stipulated by the requirements of the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic and continuous air operation - Rated thermal output: 49.9 kW - Thermal output in kcal: 43,000 - Fuel consumption: 15 kg/h - Air output: 4900 m³/h - Combustion chamber depth: 650 mm - Loading door: 370 x 350 mm - Warm air fan: 1.12 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable space: approx. 1,000 m³ - Heatable area: approx. 220 m² - Required installation space: width 720 mm, depth 1000 mm, height 1900 mm - Weight: 300 kg Godevz Hq Hopfx Ai Aoiu - Flue pipe diameter (outlet): 160 mm - Chimney diameter (reference): 200 mm - Efficiency: 85-90% - Recommended chimney draft: 13 Pa - Flue gas temperature: 290°C - Warm air outlet connections: 2 x Ø 200 mm - For further data, please refer to the attached data sheet The 2 duct connectors for the outgoing warm air are located at the rear of the furnace in the lower section. A maximum of 20 meters of ducting per connector is permitted for air distribution.

Rok výroby: 1999, stav: pripravené na použitie (použité), Objem: 1000 l, max. teplota: 750°C, vykurovací výkon: 40 kW, rozmery stroja (D/Š/V): cca 2500 mm / 1600 mm / 1900 mm, hmotnosť: cca 2000 kg. Dokumentácia k dispozícii. Možnosť obhliadky na mieste. Dostupné predbežne od októbra/novembra 2025. Gjdpsw Emyzjfx Ai Asiu

Stav: veľmi dobrý (použitý), Rok výroby: 2014, Viesmann Vitoplex 100 LS s horákom Weishaupt WM - G10/4A Gjdpfx Astrl Sksi Ajiu

Stav: použitý, 4 stainless steel tank containers, used Capacity: 35 cbm Order no.: 4244 Material: 1.4404/1.4401 External dimensions: 7,820 mm length 2,438 mm width 2,591 mm height Operating data (according to nameplate): 1 vessel = -0.4/+4 bar operating pressure, 150 °C 1 vessel = -0.4/+3 bar operating pressure, 110 °C Giedpfjv Dtgaex Ai Asu 1 vessel = +3 bar operating pressure, 120 °C 1 vessel = +4 bar operating pressure, 130 °C Design: Cylindrical, horizontal vessel in 20' transport frame with dished ends Half-pipe coil, approx. 6.5 sqm heating surface, designed for 3 or 4 bar operating overpressure Insulation: 50 mm around cylinder and end caps Connections: 2 manways DN 500 on the top centerline plus various other connections Outlet at the front end Weight: approx. 4.4 t If required: Frame for 4 tank containers, made of painted carbon steel, dismantled for transport External dimensions: 9,173 mm length, 7,254 mm width, 6,124 mm height Additional price on request.

Stav: dobrý (použitý), Horizontálny tank 16 000 l, Gisdpoiiyufefx Ai Aou Nerezová oceľ AISI 316, Rozmery: Ø 2 530 mm x V 2 900 mm x D 3 800 mm Prielez v prednej časti

Stav: použitý, kapacita palivovej nádrže: 128 l, Rok výroby: 2018, prevádzkové hodiny: 8 470 h, Rok výroby: 2018 Gisdpsxqfc Nefx Ai Asu Prevádzková hmotnosť: 9 000 kg Rozmery (D x Š x V): 699 x 220 x 257 cm

Stav: ako nová (výstavný stroj), Rok výroby: 2024, new KAESER TB19 refrigerated compressed air dryer, with energy-saving SECOTEC control system. Equipped with electronically controlled condensate drain. Year of manufacture: 2024 Technical data: Volume flow: 2.10 m³/min Pressure dew point: 3°C Overpressure: 3 to 16 bar Ambient temperature: +3°C to +43°C Max. compressed air inlet temperature: +55°C Gijdpfx Aed S S T Doi Aju Compressed air connection: G 1" Dimensions (W x D x H): 620 x 540 x 963 mm Weight: 108 kg Power supply: 230 V / 1 / 50 Hz Visit our premises in Erlangen. On more than 450 sqm of exhibition space you will find a large selection of new and used compressors.

Stav: nový, Rok výroby: 2025, Funkcionalita: plne funkčný, Patentovaná elektrická vykurovacia jednotka pre efektívne a komfortné vykurovanie. Vyhrievací výkon 2,8 kW (infračervené žiarenie 1,6 kW a halogén 1,2 kW) Gedpfx Aijqvmcpo Aeiu pre cca 10–35 m² plochy pri výške miestnosti cca 2,5 m Príkon 11,8 A Rozmery 54 × 29 × 80 cm Hmotnosť 15 kg

Stav: nový, Rok výroby: 2025, Dimensions (L x W x H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total Power Requirement: 4.5 kW Hot Air Furnace MARTINA 350 MARTINA hot air furnaces provide an ideal solution for energy recovery in woodworking industrial and craft businesses. They are designed for heating larger usable areas, such as workshops and workspaces in craft and industrial operations. These hot air systems require no extended preheating phases and can heat the carpenter’s or joinery workshop, as well as other production facilities, in the shortest possible time. Solid wood and its by-products, such as solid wood panel remnants, chips, sawdust, pellets, or briquettes, serve as fuel. MARTINA hot air furnaces comply with the EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety regulation of Directive 89/392 CE. All hot air furnaces in the MARTINA series – 15, 30, 55, 85, 120, 180, 240, 350 – comply with both stages of the German Federal Emission Control Ordinance (1. BImSchV) regarding permissible emission values. - Automatic and continuous operation - Thermal output: 390 kW - Thermal output (Kcal): 335,000 - Fuel consumption: 85 kg/h - Airflow rate: 20,000 m³/h - Combustion chamber depth: 1,400 mm - Loading door: 500 x 700 mm - Hot air fan: 4.48 kW - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at nominal output: 0.18 mbar - Heatable volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Space requirement: width 1,700 mm, depth 2,000 mm, height 2,550 mm - Weight: 1,400 kg - Flue pipe diameter (port): 300 mm - Chimney diameter (reference): 350 mm - Efficiency: 85–90% - Chimney pressure: 11.5 Pa - Exhaust gas temperature: 289 °C - Hot air outlet ports: 2 x Ø 450 mm - For further technical data, please refer to the attached data sheet The two pipe connections for outgoing hot air are located at the rear of the furnace in the lower section. A maximum pipe length of 20 meters per outlet is permitted for air distribution. Giodpsvz Hqyjfx Ai Aeu Greater lengths may be possible in consultation with the manufacturer. Please contact us for further details.

Rok výroby: 2023, stav: nový, Funkcionalita: plne funkčný, Priemyselný axiálny ventilátor 800 mm priemer ZIEHL-ABEGG fn80-sdi.6n.v7 NOVÝ! Predaj vo viacnásobnom kartóne Výrobca: ZIEHL-ABEGG Typ: FN080-SDI.6N.V7 Axiálny ventilátor so srpovými hliníkovými lopatkami Prietok vzduchu: 10 000–21 000 m³/h Menovitý prietok: 15 800 m³/h pri 140 Pa vzduchového tlaku Výkon motora: 1,15 kW/0,53 kW Menovité hodnoty 3-fázový ~400 V D/Y 50 Hz 1,55/0,95 kW 3,3/1,7 A Otáčky: 850/650/min Krytie: IP54 Hlučnosť: 70 dB COSY 0,69 Godew U T E Iopfx Ai Aoiu Max. teplotný rozsah: 80 °C Ochrana motora: termokontakt Typ ochranného krytu: sieťová mriežka Rozmery (Š x V x H) mm: 861 x 861 x 273