Formátovacie píly s dĺžkou rezu 2801–3300 mm kúpiť použité (7)

Stav: nový, Rok výroby: 2024, ALL ALTENDORF F25 MODELS IMMEDIATELY AVAILABLE! Fedpsg Dgr Hsfx Agqjpi Manual height and tilt adjustment 0 – 46° of the saw blade with digital display Motor power: 5.5 kW Saw blade speed: 3,600 / 4,200 rpm Double roller carriage, carriage length: 3,200 mm Angle-mitre fence, cross cuts up to 3,450 mm Max. saw blade diameter: 315 mm, max. projection: 104 mm Cutting height: 100 mm, 70 mm at 45° Machine height: 88 cm Note for Used Machines: • Technical details subject to change and prior sale. • Prices quoted are ex-stock, loaded – buyer collects! • Machines have been cleaned and function tested. • All machines are sold as seen without any guarantee or warranty. Buyers may inspect the machines on site at any time. • Special agreements are only valid in written form. (Enquiries will only be responded to if you provide your address and telephone number!)

Stav: veľmi dobrý (použitý), Rok výroby: 2005, 3-axis controlled panel saw with parallelogram auxiliary table Swiveling control panel above the table Data entry via membrane keypad Electronic adjustment of the scoring unit Automatic rip fence adjustment via threaded spindle and linear ball bearing guide Parallelogram auxiliary table for miter cuts Manual adjustment with angle settings from +50° to -50° perpendicular to the cutting axis including fine adjustment. Angle detection system via magnetic strip and LCD display. Crosscutting ruler with 3 LCD readouts Extendable auxiliary table with roller support Fpedpjyftzkefx Agqoi Technical specifications: Cutting length (mm): 3200 Main saw blade diameter (mm): 450 Scoring blade diameter (mm): 120 Panel cuts with extendable stop (mm): 3200x3200 Swivel range (degrees): 0° / +46° Max. saw blade cutting height at 90° (mm): 150 Max. saw blade cutting height at +45° (mm): 130 Saw blade rotational speed (rpm): 2500, 3500, 5000 Scoring blade rotational speed (rpm): 9000 Extraction port diameter (mm): 120 & 100 Main motor power (Hz / kW): 50 / 7.5 Scoring unit power (Hz / kW): 50 / 0.75 Cutting width with rip fence (mm): 1270 Weight approx.: 1180 kg Notice for used machines: • Errors in technical details and prior sale excepted. • All listed prices are ex-location and free loading. • The machine has been cleaned and functionally tested. • All machines are sold as-inspected, without any warranty claims. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (Inquiries will only be answered with your address and telephone number!)

Stav: nový, ALTENDORF Model F45 Pro Drive Type of offer: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine at a promotional price with full manufacturer’s warranty. Pro Drive Control: - 3.5" color display with separate keyboard - Automatic dimension correction on rip fence and angle fence when tilting the saw unit - Easy axis calibration - Machine diagnostics, operating hours counter, USB interface - Recall of last dimension entry (back function) - 99 storable cutting programs - Grooving: automatic step-by-step positioning of the rip fence - 400V / 50Hz – Europe, Scale: mm - Electromotive height and tilt adjustment 0–46° for the main saw blade with automatic height correction when tilting the saw unit - Machine height 910 mm (standard) - The F 45 control panel is positioned at eye level, allowing convenient control of all axes and full visibility of all settings - Single-handed operation of the swing-away device is easily accessible from the operating position in front of the machine - Another advantage: the smooth machine front keeps the workspace clear INCLUDED OPTIONS: - M62003 Template holder - M64080 Increased cutting height with blade projection up to max. 204 mm - M51101 Single-side tilting saw unit with 7.5 kW (10 HP) motor - M24030 2-axis scorers with electromotive height and lateral adjustment - M24037 LED lighting for scorer hazardous area - M41010 Table extension 840 mm - M34204 Double roller carriage, carriage length 3200 mm - M44404 Angle/miter fence, crosscuts up to 3500 mm - M44443 CNC rip fence, cutting width 1300 mm - M44450 Front support roller - M37003 On/off switch on double roller carriage Note on used machines: Fpodpfeiz Aufsx Agqoi • Subject to change in technical details and prior sale. • Stated prices are ex-works and include loading. • The machines have been cleaned and function-tested. • All machines are sold as inspected without any guarantee. The buyer is welcome to inspect the machines at our location. • Special agreements are only valid in written form. (We only respond to inquiries with your address and phone number!)

Stav: nový, Vybavenie: 5-osové elektronické riadenie Otočný ovládací panel nad stolom Elektronické nastavenie predrezávacieho agregátu Automatický paralelný doraz s nastavením cez skrutku a lineárne guľôčkové vedenie Hlavný/vypínač integrovaný v poťahovacom vozíku Rám „Quick Lock“ s pozdĺžnym dorazom s LCD displejmi „Full Support“ Posuvný vozík s oblúkovými kontaktnými plochami – 10 rokov záruka! Teleskopické rameno s lineárnym vedením s guľôčkovým obehom Technické údaje: Priemer hlavného pílového kotúča: 550 mm Priemer predrezávača: 120 mm Formátovacie rezy s výsuvným dorazom: 3200x3200 mm Rozsah naklápania: 0 +46 stupňov Fsdpjcrnm Njfx Agqepi Max. výška rezu pri 90°: 200 mm Max. výška rezu pri +45°: 130 mm Otáčky hlavného kotúča: 2500, 3500, 5000 ot./min Otáčky predrezávača: 8500 ot./min Priemer odsávacieho hrdla: 120 a 100 mm Výkon hlavného motora (50 Hz): 7,0 kW Výkon agregátu predrezávača (50 Hz): 1,3 kW Šírka rezu s paralelným dorazom: 1500 mm Vrátane nasledujúcich voliteľných doplnkov: 570335 „Pro-Lock“ systém rýchloupínania hlavného pílového kotúča s rýchlonastavením rozdeľovacieho klinu bez použitia kľúča

Stav: nový, Pílová jednotka je výkyvná obojstranne do 46°. Programovateľné, elektrické nastavenie pílového kotúča. Ovládacia jednotka s elektronickým displejom na nastavenie výkyvu a zdvihu pílového kotúča. Pílová jednotka z liatiny zabezpečuje vysokú torznú tuhosť a bezvibračnú prevádzku. Uľahčené nakladanie veľkých platní vďaka veľkému formátovaciemu rámu s valčekom. Teleskopické pravítko s dvoma profesionálnymi výklopnými dorazmi. Vynikajúca presnosť rezu – formatovací vozík vedený vysoko presným a ľahko pohyblivým systémom s guľôčkovým kontaktom, overený tisíckrát v praxi. Predrývacie zariadenie s vlastným pohonom, jednoducho nastaviteľné zvonku. Pílová jednotka pre kotúče s priemerom 400 mm. Predrývací kotúč s priemerom 160 mm. Ochrana pílového kotúča s manuálnym nastavením v 2 polohách. Riadenie v 3 osiach. Motorický paralelný doraz s elektronickým polohovaním. Obsahuje: - Zobrazenie polohy pomocou enkodéra - Nastavenie pomocou guľôčkovej skrutky - Plynulé nastavovanie pomocou prepínača alebo automatického polohovacieho systému - Možnosť inkrementálneho nastavenia - Výklopné zariadenie pre doraz pod stôl - Šírka rezu 1270 mm - Programované pohyby motorizovaného nastavovania a výkyvu pílového agregátu UP-verzia: - So sklopným ovládacím panelom pre maximálnu flexibilitu X-verzia: - S dorazom Compex na rýchle a presné vykonávanie šikmých rezov s automatickou kompenzáciou polohy dorazu (kompenzácia dĺžky) - Konzola s uhlovo nastaviteľným teleskopickým dĺžkovým dorazom - Voliteľne so stupnicou na delenie uhlov (kat. č.: 5510403) - Pozdĺžny doraz s dvomi LCD displejmi polohy dorazu vrátane voliteľných prvkov: - Prevedenie s max. dĺžkou pohybu pílového vozíka 3200 mm - Hlavný a predrývací motor možno zapínať/vypínať priamo na formátovacom stole - Formátovací rám s prípravou CompeX - Verzia "READY 3 UP" - 2 rýchlosti rezu (3500/5000 ot./min) Priemer odsávacích hrdiel: 120 & 80 mm Hlavný motor: 7,0 kW, 400 V, 50 Hz Dĺžka formátovacieho rámu: 1200 mm Šírka formátovacieho rámu: 650 mm Dĺžka formátovacieho posuvného vozíka: 3200 mm Šírka formátovacieho posuvného vozíka: 360 mm Šírka rezu s paralelným dorazom: 1270 mm Max. dĺžka rezu vľavo od pílového kotúča: 3260 mm Naklápanie pílového kotúča: -46 – 46° Fodpfjd Akygex Agqepi Max. výška rezu pri 90°: 136 mm Max. výška rezu pri 45°: 97 mm Max. výška rezu pri -45°: 60 mm Priemer hlavného pílového kotúča: 400 mm Priemer predrývacieho kotúča: 160 mm

Stav: nový, Tilting Spindle Moulder Fjdpfx Aocuwptogqspi Easy and practical operation thanks to the ergonomic arrangement of the control elements on the front of the machine. Digital display for spindle height and tilt position. Spindle speed display. Right/left rotation of the spindle. 8 speeds. Spindle diameter: 30 mm. Spindle clamping length: 125 mm. Maximum tool diameter under table: 240 x 80 mm. Extraction connection diameter: 2 x 120 mm. INCLUDES OPTIONS: 57.02.63 "LL" version for profiling work with 2 table extensions 57.03.30 Motorized height and tilt adjustment of the working unit with digital displays 57.01.56 Three-phase motor 7.0 kW, 50Hz with star-delta switch 57.00.76 Fence with crank adjustment - Fence with stepless adjustment via front-facing, easily accessible cranks: – Adjustment of the entire fence to the tool – Adjustment of the infeed fence to vary chip removal – Mechanical digital displays – Wooden fence pads and connecting bridges Dimensions (L x W x H): 2500 x 855 x 900 mm Weight approx. 550 kg Note regarding used machines: • Errors in technical specifications and prior sale reserved. • All prices are ex works – loaded on truck free of charge! • The machines have been cleaned and function tested. • All machines are purchased as seen without any warranty. Buyers are welcome to inspect the machines at our location. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Stav: nový, Massive work table made of heavily ribbed grey cast iron Robust base frame constructed from welded steel Precision panel sliding carriage made of anodized aluminium Carbide guide rails – ensuring long-lasting precision and minimal maintenance for the sliding carriage Tilting grey cast iron saw unit with dual segment guidance Heavy-duty parallel fence with round bar guidance Integrated mitre cutting device on the sliding carriage Scoring unit with its own powerful drive motor (optional) Equipped with a high-quality edging frame & telescopic fence, integrated roller, inclined scale, and practical eccentric clamp Saw blade speed adjustable in two stages (accessible from above, work table with removable insert) Includes saw blade pendulum guard INCLUDES OPTIONAL DIGITAL DISPLAY FOR PARALLEL FENCE Max. cutting height at 90° (mm): 140 with Ø400 mm blade Max. cutting height at 45° (mm): 100 with Ø400 mm blade Saw blade tilting (degrees): 90 / 46 degrees Fpjdsit I Sbopfx Agqsi Saw blade height and tilting adjustment: manual Saw blade speed (rpm): 3500 / 5000 Main motor power (kW) 50 Hz: 7.5 Scoring motor power (kW) 50 Hz: 1.3 Scoring unit speed (rpm): 9200 Panel cut capacity (mm): 3200 x 3200 Cutting width for parallel cuts (mm): 1270 Extraction port diameter (mm): 120, 60