5-osé obrábacie centrum DECKEL MAHO

Deckel Maho DMU 50 eVo Linear

Stav: veľmi dobrý (použitý), Rok výroby: 2006, Funkcionalita: plne funkčný, Výbava: dokumentácia / manuál, dopravník triesok, Deckel Maho DMU 50 evo Linear with Heidenhain TNC 530 Control – Excellent Condition Technical Data: >> Year of Manufacture: 2006 >> Control: Heidenhain iTNC 530 >> Travels: X500 / Y450 / Z400 mm >> C-Axis: 360 degrees >> B-Axis: 0 degrees up to 161.955 degrees >> Tool Holder: HSK A63 >> Max. Spindle Speed: up to 18,000 rpm >> Feed Rate: infinitely programmable up to 20,000 mm/min (X, Y, Z) C/B Axis: infinitely programmable up to rapid traverse speed >> Rapid Traverse Y & Z Axis: 50 m/min X Axis: 80 m/min (linear drive) B Axis: 40 rpm C Axis: 50 rpm >> Tool Magazine: Double gripper, 60 magazine stations >> Clamping Table Surface: Ø 500 x 380 mm T-slot spacing: 63/14H7 >> Table Load Capacity: 200 kg >> Dimensions and Weight (approx.): Machine without control or attachments Depth 3.0 m, Width 2.4 m, Height 2.6 m Weight: approx. 7,000 kg >> Operating Voltage: 400 V >> Heidenhain HR 410 electronic handwheel >> Power Connection: 17 kVA >> Chip Conveyor >> Active Spindle Cooling >> Mist Extraction >> IKZ (Through-spindle coolant): 40 bar >> Coolant Cleaning System (filter fleece unit) >> Spray Gun >> Visiport >> Purge Air for Measuring System >> Preparation for Robotic Loading >> Heidenhain TS640 3D Probe Csdsvyr Tdjpfx Agwerh >> 3D Quick Set >> Kinematics >> Blum Laser for tool measurement and breakage control >> Complete Documentation Recent Work Performed: >> Main spindle completely overhauled >> Full maintenance: All coolant and pneumatic hoses replaced, new filters, fluids and belts renewed, way wipers, etc. Complete cleaning >> Geometric inspection carried out (acceptance protocol available) About this Machine: For sale is a Deckel Maho DMU 50 evo Linear machining center with Heidenhain TNC 530 3D path control. The machine is in excellent condition. The main spindle has been overhauled (exchange spindle), completely serviced, and an acceptance protocol is available. You are welcome to inspect and test the machine under power at our facility.

Stav: veľmi dobrý (použitý), Rok výroby: 2007, prevádzkové hodiny: 1 380 h, Funkcionalita: plne funkčný, pojazdová vzdialenosť osi X: 500 mm, zdvih osi Y: 450 mm, zdvih osi Z: 350 mm, maximálna rýchlosť vretena: 18 000 ot./min, počet pozícií v zásobníku nástrojov: 30, uhol natočenia osi B (max.): 108 °, uhol natočenia osi C (max.): 360 °, TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 450 mm Travel Z-axis: 400 mm B-axis: 108° C-axis: 360° Spindle speed range: 18,000 rpm Tool holder: HSK-63-A Tool positions: 30 Table size: 500 x 380 mm Rapid traverse X-axis: 80 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 50 m/min Feed rate X-axis: 20 m/min Feed rate Y-axis: 20 m/min Feed rate Z-axis: 20 m/min MACHINE DETAILS Control: Heidenhain iTNC 530 Machine weight: 6,500 kg Operating hours: 1,380 h Power-on hours: 19,803 h EQUIPMENT - 5-axis simultaneous machining - Tool changer - NC rotary-swivel table - Through spindle coolant (IKZ): 40 bar preparation - Paper band filter - Chip conveyor - 3D probe: Renishaw preparation (probe not included) Crsdpfx Agjwu Evtowsh - Blum laser tool measurement

Stav: použitý, Rok výroby: 2008, x-travel 500 mm y-travel 450 mm z-travel 400 mm Control HEIDENHAIN Control MillPlus iT Table clamping surface ø 500 x 380 mm B-axis 0 - 161.955° C-axis 360° Spindle taper SK 40 Spindle speeds 20 - 18,000 rpm Spindle power max. 35 kW Spindle torque max. 130 Nm Feed rates stepless up to 20,000 mm/min Rapid traverse X/Y/Z-axis 80 / 50 / 50 m/min B-axis rapid traverse 40 rpm C-axis rapid traverse 50 rpm Crodpfx Agewlvi Eowjh Number of tool magazine stations 30 Tool diameter with 2 empty adjacent stations 130 mm Tool diameter with all stations filled 80 mm Tool length max. 300 mm Tool weight max. 6 kg Internal coolant supply 40 bar Total connected load 52 kVA Machine weight approx. 6 t = 5-axis machining center with 2-axis NC rotary tilting table Accessories: electronic handwheel, chip conveyor, coolant system, belt filter unit

Stav: dobrý (použitý), Rok výroby: 2006, TECHNICAL DATA Main Drive Speed: Infinitely programmable: 18,000 rpm Setup mode: 20 – 800 rpm Working Spindle: Hollow shank taper: HSK-A63 Tool clamping: Hydraulic Feed Drive Linear motor: X-axis AC servo motors: C, B, Y, Z Feed rate X, Y, Z: up to 20,000 mm/min Rapid Traverse Y, Z: 50 m/min X: 80 m/min B: 40 rpm C: 50 rpm Position Measuring System Resolution: C, B, X, Y, Z: 0.001 mm Position tolerance: C, B, X, Y, Z: 0.010 mm Working Area X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm B-axis: 0° to 161.955° C-axis: n x 360° Tool Changer with Double Gripper Magazine positions: 120 Cedeu Hkb Repfx Agwerh Max. tool diameter without adjacent free slots: 80 mm Max. tool diameter with adjacent free slots: 130 mm Max. tool length from spindle nose: 300 mm Max. tool weight: 6 kg NC Rotary Table with Swivel Axis C-axis: Clamping area rotary axis (mm): 500 x 380 mm T-slot spacing / size: 63 / 14 H7 Centering bore: 30 H6 Max. torque: 1491 Nm Max. table rotation speed: 50 rpm B-axis: Max. swiveling torque: 1864 Nm Swiveling speed: 40 rpm Swiveling range: 0° - 161.955° Input and display increment: 0.001° Weight: 420 kg Max. table load: 200 kg Weight: Approx. 6,800 kg Installation weight: Approx. 7,500 kg Dimensions: 4170 x 3133 x 2560 mm SCOPE OF DELIVERY Including (not limited to): Deckel Maho DMU 50 Evo CNC machining center Heidenhain iTNC 530 Tool breakage control Blum probe oil mist separator fire extinguishing system High-pressure pump and belt filter system Chip conveyor Exact scope of delivery as per photo series We do not assume any liability for the correctness, completeness, or up-to-dateness of the information.