Fréza na nástroje

Deckel FP1 Aktiv

Stav: dobrý (použitý), Rok výroby: 1985, Deckel FP1 Aktiv s trojosovou digitálnou indikáciou Heidenhain, 3 aktívne osi, pevný stôl, vreteno SK 40 M16. Centrálne mazanie, obslužné manuály. V dobrom a prevádzkyschopnom stave, pochádza zo strediska odborného vzdelávania. Po dohode možnosť predvedenia pod elektrickým napätím. Ljdpsxwunzjfx Afzoai

Stav: použitý, Rok výroby: 1980, Technické detaily: Posun v ose x: 850 mm Posun v ose y: 280 mm Posun v ose z: 355 mm Upínání vřetena ISO: SK 45 / SK 45 Naklápěcí vřetenová hlava vlevo a vpravo: každý 90° Rozsah otáček: 28 - 1400 / 18 stupňů ot./min Vzdálenost stůl/horizontální vřeteno: min.: 60 / max.: 180 mm Upínací plocha stolu: 1070 x 270 mm Zatížení stolu: 1000 kg Naklápění stolu +/-: každý 45° Posuvy: X+Y: 16 - 800 a Z: 5 - 250 mm/min Celkový příkon: 8,0 kW Hmotnost stroje přibližně: 3100 kg Rozměry stroje přibližně D x Š x V: 2,1 x 1,8 x 2,15 m Rozměry rozvaděče: D: 0,8 x Š: 0,45 x V: 1,65 m Upínací plocha: 315 x 1250 mm Příčné nastavení nosníku ručně: 650 mm Na stole namontováno: upínací hlava se 3-čelisťovým sklíčidlem Ø 200 mm s vnitřními čelistmi, výška hrotu 165 mm Lajdpfx Afsu Ndf Iozji Chladicí zařízení Ruční klika Frézovací trn Ø 22 x 620 mm s tvarovým frézovacím nástrojem Ø 80 x Ø 8 mm

Stav: veľmi dobrý (použitý), Rok výroby: 1990, Funkcionalita: plne funkčný, Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and stepless feed, in excellent condition Technical data: - Year of manufacture: 1990, machine no. 2102-5046 - Fixed angle table - Speed range: 40 – 2000 rpm - Stepless feed on 3 axes - Rapid traverse on 3 axes Ledpfxsu Um Ero Afzoai - Drive power: 1.5 / 1.9 kW - Spindle brake - Travels X/Y/Z: 300/160/340 mm - Vertical milling head adjustable by 100mm on spindle support - Vertical quill and horizontal quill – SK40 - Drawbar system S20x2 - Weight approx. 800 kg Accessories and equipment: - 3-axis digital readout Heidenhain TNC113 - Electrical central lubrication - Coolant system - Operating manual, spare parts list About the machine: For sale is a Deckel FP1 universal milling machine, year 1990, in excellent condition. The machine has very little backlash and all spindles move smoothly. Even at maximum speeds, the milling machine runs very quietly. On this newer FP1 model, the feed on all three axes is steplessly adjustable, and the machine also features rapid traverse on these axes. A major advantage is the active 3-axis digital display. With this Heidenhain path control, you can enter dimensions that the machine will automatically approach. The FP1 was used in a training workshop and only rarely operated. An oil change has been carried out. Mechanically and electrically inspected. The Heidenhain digital readout makes working easier and even more precise. Take the opportunity to view and test this top-quality machine under power on site.

Stav: dielensky repasované (použité), Funkcionalita: plne funkčný, pojazdová vzdialenosť osi X: 300 mm, zdvih osi Y: 160 mm, zdvih osi Z: 340 mm, maximálna rýchlosť vretena: 2 000 ot./min, otáčky vretena (min.): 40 ot./min, Dear Sir or Madam, Lasdpeuw Uu Nefx Afzsi We are pleased to offer you a Deckel FP1 milling machine, 3-axis active version, equipped with retrofitted safety features. These newer model machines include central lubrication, an electric coolant pump, and a brake motor, among other features. The control cabinet can be quickly disconnected from the machine thanks to Harting connectors. The connection of all safety components to the control cabinet is also made using this connector type, ensuring handling is not compromised. We provide a 12-month warranty on the retrofitted safety features, which we can offer for every type of machine! The electronic spindle guard can be adjusted along several axes and is designed to prevent access to the working spindle as well as hazards from flying chips, coolant, etc. The electronic spindle safety cover is intended to prevent access to the rotating shaft stub and tool clamping mechanism. Delivery time: on request Year of manufacture: 1989-1992 Machine No.: 2102-xxxx Table: Rigid angular table Travel: X300mm/Y160mm/Z340mm Quill stroke: 60mm Connected load: 1.9kW Number of spindle speeds: 16 Spindle speed range: 40-2000 rpm Tool holder: SK40 Feed: Infinitely variable 5-500 mm/min Rapid traverse: 1200mm/min Equipment and accessories: Coolant system, central lubrication, manual, machine mounts, electronic spindle guard, electronic spindle safety cover Our service promise to you: - We are a certified master craftsman business in mechanical engineering - All machines are thoroughly checked - All lubricants and, if necessary, worn parts are replaced in advance - Upon request, we can completely or partially overhaul the selected machine for you - You can order additional accessories such as tools, etc., directly upon request - Upon request, we can install additional accessories such as safety equipment, etc., for you - We are also happy to arrange shipping and/or delivery and installation

Stav: nový, Optimum OPTImill MZ 2S Milling Machine Equipped with a digital 3-axis position display DP 700 by NEWALL. The feed axes are inverter-driven and controlled via the operator panel. Versatile Applications Excellent vibration damping and stability of the machine frame All guides are hardened, precision-ground, and adjustable via gib strips Automatic feed on X, Y, and Z axes, continuously adjustable via the electronic joystick on the control panel Electronic feed limit stop Ball screw drives on all axes Centrally and clearly arranged control panel with integrated digital position and speed display Massive, large-format cross table with precision-machined surface and 5 T-slots Coolant system Large dimensioned handwheels with scales Machine lamp Smooth running Manual central lubrication system TECHNICAL DATA Dimensions and Weight Length (approx.): 1239 mm Width/Depth (approx.): 1168 mm Height (approx.): 1900 mm Weight (net, approx.): 1400 kg Drilling/Milling Head Head swivel range: ±90° Drill-Milling Capacity Max. cutter head size: 100 mm Drilling capacity in steel (S235JR): 30 mm Continuous drilling capacity in steel (S235JR): 26 mm Max. shank milling cutter size: 25 mm Electrical Data Drive motor power: 2.2 kW Connection voltage: 400V Mains frequency: 50 Hz Horizontal Milling Table Table length: 750 mm Table width: 320 mm Vertical spindle to horizontal table min.: 75 mm Vertical spindle to horizontal table max.: 410 mm Horizontal table T-slot size: 14 mm Number of T-slots: 5 T-slot spacing: 63 mm Horizontal spindle to horizontal table min.: 70 mm Horizontal spindle to horizontal table max.: 400 mm Max. load capacity on horizontal table: 285 kg Vertical Milling Table Table length: 830 mm Table width: 250 mm T-slot size: 14 mm Number of T-slots: 2 T-slot spacing: 63 mm Coolant System Coolant pump power: 95 W Travel Manual travel X-axis: 400 mm Manual travel Y-axis: 200 mm Manual travel Z-axis: 335 mm Automatic travel X-axis: approx. 310 mm Automatic travel Y-axis: approx. 160 mm Automatic travel Z-axis: 295 mm Vertical Spindle Vertical spindle overhang: 100 mm Vertical spindle taper: ISO 40 DIN 2080 Vertical spindle speed range: 50 – 1,890 rpm Number of speed ranges: 12 steps Drawbar: M16 Quill stroke: 120 mm Max. vertical spindle torque: 1,100 Nm Lsdpsfnh Sgofx Afzeai Feed Speed Feed speed X-axis: 10 – 600 mm/min Feed speed Y-axis: 10 – 600 mm/min Feed speed Z-axis: 10 – 600 mm/min Electrical Connection Total connected load: 4 kW Motors Rapid traverse X-axis drive motor: 0.375 kW Rapid traverse Y-axis drive motor: 0.375 kW Rapid traverse Z-axis drive motor: 0.375 kW SCOPE OF DELIVERY: Adapter ISO 40/MK3 Arbors MK1 and MK2 Horizontal milling spindle Ø 27 mm Operating tools

Stav: dielensky repasované (použité), Deckel FP1 AKTIV (3-axis Active) Machine No.: 2102-5745 Year of manufacture: approx. 1988 Travels: X-axis: 300 mm Y-axis: 150 mm Z-axis: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40–2000 rpm Motor power: 1.6 and 2 kW Electrical connection: 380 Volt, 50 Hz Equipment: - Active digital readout for 3 axes, HEIDENHAIN type TNC 113 - Infinitely variable feed on X, Y, and Z axes - Quill travel on vertical milling head: 60 mm - Vertical milling head swivelling and extendable horizontally by 100 mm - Coolant system (coolant tank integrated in the machine base) - Documentation - Central lubrication system Space requirements (L x W x H): 1350 x 1100 x 1700 mm Weight: 850 kg The machine has been visually refurbished and technically inspected. Geometry inspection videos can be provided on request. Backlash Y axis: 0.15 mm Backlash X axis: 0.3 mm Lsdpoxpwfgofx Afzsai Backlash Z axis: 0.2 mm Run-out horizontal spindle: 0.002 mm Run-out vertical spindle: 0.002 mm Parallelism deviation Y axis: 0.002 mm (measuring length 150 mm) Parallelism deviation X axis: 0.002 mm (measuring length 300 mm) The following parts have been renewed: - Central lubrication checked - Heidenhain digital display overhauled - Set of wipers installed - LEDs in active display replaced - Oil change - Vertical milling head re-bedded - Oil sight glass renewed Net price ex works, loaded from stock

Stav: dobrý (použitý), Funkcionalita: plne funkčný, DECKEL FP1 Aktiv Milling Machine Manufacturer: Deckel Model: FP1 Aktiv Condition: very good Type of control: conventional Control system: Aktiv HEIDENHAIN TNC X-travel: 300 mm Y-travel: 160 mm Z-travel: 340 mm Tool holder: SK40 Spindle speed: 40–2000 rpm Control system: Aktiv HEIDENHAIN TNC Total power requirement: 2 kW Machine weight: approx. 0.73 t Ljdpfx Ajxnniaefzsai Space requirements (LxWxH): approx. 1200x1100x1600 mm

Stav: nový, WMD30LV - 230V / 1Ph Drilling capacity in steel ----- 32 mm Milling capacity in steel ----- 20 mm Face milling ----- 76 mm Motor ----- brushless 1.5 KW Spindle speed stepless ----- 50 - 3000 rpm Spindle stroke ----- 70 mm Spindle taper ----- ISO 30 Worktable ----- 840 x 210 mm Cross travel ----- 220 mm Longitudinal travel ----- 565 mm T-slots ----- 3x14 mm Throat ----- 240 mm Distance spindle - table ----- 470 mm Weight ----- 230 KG STANDARD ACCESSORIES * Drill chuck incl. chuck holder * Digital depth stop * Digital spindle readout * Fine feed adjustment * Left / Right rotation * Milling head tiltable left / right 90 degrees * Toolbox OPTIONS * 3-axis digital readout * Base cabinet Lsdpega T Agofx Afzoai * Automatic longitudinal feed * Milling vice * ISO30 collet chuck & 12 collets in case * Milling cutter set

Stav: veľmi dobrý (použitý), Rok výroby: 1992, Funkcionalita: plne funkčný, Výbava: dokumentácia / manuál, F729 Universal Milling Machine Deckel FP1 with 3-Axis TNC 113 Heidenhain Digital Readout & Infinitely Variable Feed Very Good Condition Lodpfx Afsu T D Nrjzsai Technical Specifications: >> Year of Manufacture: 1992 Machine No. 2102-6289 >> Fixed Angle Table (newly planed) >> Spindle Speed: 40 - 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable 100 mm on spindle support >> Vertical and horizontal quill – ISO taper SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories & Equipment: >> 3-axis Heidenhain TNC113 digital readout >> Coolant system >> Operating manual, spare parts list About the machine: Offered here is a Deckel FP1 universal milling machine, year 1992, in very good condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. With this newer FP1 model, the feed can be infinitely varied on all three axes, with rapid traverse also available on these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain position control, you can enter values for the machine to automatically position itself. The FP1 was located in a training facility, where it was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take advantage of the opportunity to inspect and test the machine under power on site.

Stav: dielensky repasované (použité), Rok výroby: 1989, Dear Sir or Madam, For sale is a partially overhauled Deckel FP1, fitted with a 3-axis TNC113 active control, which stands out, in particular, for its ease of use. This later model from 1989 is equipped, among other features, with central lubrication, an electric coolant pump, and a machine lamp. The machine has undergone extensive partial refurbishment in our workshop and is therefore in excellent condition. You are welcome to inspect it on site. As part of the partial overhaul, the following work, among others, was carried out: - Spindle bearings in the milling head replaced - Machine repainted - Various standard components such as handles, oil sight glasses, buttons, etc. replaced - Worn parts (e.g., drive belts) replaced - Bellows partially replaced - Gib strips adjusted - and much more... Delivery: Immediately Year of manufacture: 1989 Machine no. 2102-xxxx Table: fixed angle table Travel: X300mm / Y160mm / Z340mm Quill stroke: 60mm Power connection: 1.9KW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Ljdpfxopy Elde Afzoai Feed: stepless, 5–500 mm/min Rapid traverse: 1200 mm/min Equipment and accessories: Coolant system, central lubrication, manual, machine feet Our service promise to you: - We are a certified master enterprise specializing in mechanical engineering - All machines are thoroughly inspected - All lubricants and, where necessary, worn parts are replaced in advance - On request, we can fully or partially overhaul your selected machine - Upon request, you can order additional accessories such as tooling etc. directly - Upon request, we can mount additional accessories such as safety devices, etc. - We are happy to arrange shipping and/or installation for you

Stav: takmer ako nový (použitý), Funkcionalita: plne funkčný, Universalna frézovačka Deckel FP3 s novým 3-osým FPS Aktiv digitálním odměřováním Heidenhain, generálně repasovaná společností FPS v roce 2015, v téměř novém stavu. Technické údaje: Lasdpfx Aeu Dm E Hjfzei - Rok výroby: 1980, výrobní číslo: 2201-5045 - Pevný úhlový stůl - Otáčky: 25 – 2500 ot/min - Plynulé posuvy ve 3 osách - Rychloposuv ve 3 osách - Pohonný výkon: 2,0 / 4,0 kW - Vřetenová brzda - Pojezdy X/Y/Z: 500/300/400 mm - Svislá frézovací hlava na suportu posuvná o 200 mm - Výsuvná vertikální a horizontální pinola – SK40 - Upínací systém M16 - Hmotnost cca 1500 kg Příslušenství a vybavení: - 3-osé aktivní digitální odměřování Heidenhain (nejnovější provedení) - Zařízení na chlazení - Centrální mazání O stroji: Nabízíme univerzální frézku Deckel FP3 v bezvadném, téměř novém stavu. V roce 2015 prošla generální opravou firmou FPS a od té doby byla jen málo používána. Stroj má minimální vůle na ručních kolech, všechny vřetena se pohybují hladce. U tohoto novějšího modelu FP3 lze posuv v osách plynule regulovat, stroj je také vybaven rychloposuvem ve všech osách. Velkou výhodou je aktivní 3-osé digitální odměřování. Pomocí Heidenhain odměřování můžete zadávat rozměry, na které stroj automaticky najede. Byl proveden výměna oleje. Stroj byl mechanicky i elektricky přezkoušen. Díky digitálnímu odměřování Heidenhain je práce snazší a přesnější. Využijte možnost si tento stroj pod napětím osobně prohlédnout a vyzkoušet. Stroj je ihned k dispozici.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Výbava: dokumentácia / manuál, Universal Milling Machine Deckel FP1 with 3-axis active digital display Heidenhain TNC 111 2008 retrofit by FA Huttelmaier Very good condition Technical Data: Ledpfx Afou Nvwvezsai >> Year of manufacture: 1985 Machine no. 2102-2891 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X / Y / Z: 300 / 160 / 340 mm >> Vertical milling head can be moved 100 mm on spindle carrier >> Vertical quill and horizontal quill – SK40 >> Drawbar S20x2 >> Weight: approx. 800 kg Equipment and accessories: >> 3-axis digital display Heidenhain TNC 111 >> Coolant device >> Operating manual, spare parts list About the machine: For sale is a Deckel FP1 universal milling machine, year 1985, in very good condition. The FP1 was overhauled in 2008 by Huttelmaier. The machine has minimal play in the handwheels and all spindles move easily. Even at maximum speed, the milling machine runs very smoothly. On this newer FP1 model, the feed in all three axes is infinitely variable, and there is also rapid traverse in all axes. A major advantage is the active 3-axis digital display. This Heidenhain path control allows you to input dimensions, which the machine will approach automatically. The FP1 was located in a training workshop and only used occasionally. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital display makes operation easier and even more precise. Take advantage of the opportunity to see and test this gem on site under power.

Stav: takmer ako nový (použitý), Rok výroby: 1987, Funkcionalita: plne funkčný, Výbava: dokumentácia / manuál, Universal Milling Machine Deckel FP1 with 3-Axis Heidenhain TNC 113 Active Digital Display and Infinitely Variable Feed – Near Mint Condition Technical Data: >> Year of manufacture: 1987 Machine no.: 2102-3536 >> Fixed angular table >> Spindle speed: 40 – 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes Laedpfx Aeu R D I Ssfzei >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travels X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical quill and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis Heidenhain TNC113 digital readout >> Electric central lubrication >> Machine lamp >> Coolant device >> Operating instructions, spare parts list About the Machine: Offered here is a Deckel FP1 universal milling machine, year 1987, in near mint original condition. The machine has very little backlash and all spindles move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. On this later FP1 model, the feed is infinitely variable in three axes; it also features rapid traverse in these axes. A major advantage is the active 3-axis digital display. With this Heidenhain control, you can enter coordinates that the machine will automatically approach. The FP1 was located in a training facility where it was only occasionally used. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more precise. Take advantage of the opportunity to view and test this gem under power on site.

Stav: nový, The Meisterturn 400 V is a high-quality conventional lathe from KNUTH's range of universal lathes, distinguished by its impressive precision, modern ergonomic design, and advanced safety features. Equipped with an inverter, the machine achieves spindle speeds of up to 2,500 rpm. The integrated constant surface speed function automatically adjusts the spindle speed to the workpiece diameter, enabling machining results similar to those of CNC machines. This lathe is ideal for single-part and small-batch production, especially in tool and fixture manufacturing, as well as for training purposes. Its robust construction and premium components ensure a long service life and efficient operation. Key features include a central lubrication system, precisely adjustable slideways, and an ergonomically arranged control panel. If you are looking for a powerful and versatile solution in the conventional lathe category, you can order the Meisterturn 400 V online now. Ledjqzhhlopfx Afzoai

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Display TNC 113 Heidenhain and Infinitely Variable Feed, Light Grey, Excellent CONDITION Ledpfjxu E R Iox Afzsai Technical Specifications: >> Year of manufacture: approx. 1990, Machine No. 2102-5231 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle block by 100 mm >> Vertical and horizontal quill - SK40 taper >> Drawbar system M16 >> Weight approx. 800 kg Equipment and features: >> 3-axis digital readout Heidenhain TNC113 >> Electric central lubrication >> Coolant system >> Operating manual, spare parts list About the machine: For sale is a Universal Milling Machine Deckel FP1 in very good condition in light grey. The machine has minimal backlash and all leadscrews move smoothly. Even at maximum speeds the milling machine runs smoothly and quietly. On this newer FP1 model, the feedrate is infinitely adjustable on all three axes, and the machine is also equipped with rapid traverse on these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain traverse controller, you can input dimensions that the machine will approach automatically. The FP1 was located in a training workshop, where it was only occasionally used. An oil change has been carried out. Mechanically and electrically tested. Operation is made easier and even more precise thanks to the Heidenhain digital readout. Take advantage of the opportunity to inspect and test this gem under power on site. The machine is available immediately.