Nástrojová frézka Konvenčná frézka

Deckel FP1 X/Y Vorschub

Stav: použitý, L + Z Lathe WEILER Type LZ PRIMUS GS Machine No. 2461 Year of manufacture approx. 1990 Center distance: 400 mm Swing over bed: 250 mm Center height over bed: 125 mm Swing over cross slide: 140 mm Center height over cross slide: 70 mm Spindle bore: 24 mm Spindle speed: 60 - 3000 rpm, 18 steps Feed: longitudinal and transverse Chuck flange: short taper DIN 55022 size 4 Tailstock taper: MK 2 Drive power: 1.1 kW and 1.5 kW, pole-changeable Electrical connection: 380 Volt, 50 Hz - 3-axis digital readout FAGOR, Type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear stages - 3-jaw chuck RÖHM Ø 125 mm with stepped jaws - QUICK CHANGE TOOLPOST MULTIFIX with 1 tool holder - Collet set Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 mm - 1 center point for collet chuck - Emergency stop - Foldable chuck guard - Splash guard - Machine lamp Iedortd Uwspfx Agtoal - Electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Required floor space L x W x H: 1200 x 900 x 1560 mm Weight: 520 kg Good condition

Stav: dobrý (použitý), Rok výroby: 1992, Automatic band saw manufacturer: JAESPA, model: W400 AZ Control: Minipos 807, year of manufacture: 1992 Cutting diameter (round material): max. 400 mm Saw blade dimensions: 5500 x 32 x 1.1 mm Automatic feed, minimum cut-off length: 20 mm Chip conveyor Total power requirement: 4 kW Weight: approx. 2500 kg Accessories: 2 x saw blades, 6 m roller conveyor with motorized drive, machine documentation available. Iedpfx Aegf H Sasgtjal Required space: 2.8 x 2.8 x 2 m

Stav: dielensky repasované (použité), Rok výroby: 1989, Dear Sir or Madam, For sale is a partially overhauled Deckel FP1 with 3-axis Heidenhain TNC113 active control, renowned for its particularly user-friendly operation. This later model from 1989 is equipped, among other features, with central lubrication, an electric coolant pump, and a machine lamp. The machine has undergone a thorough partial overhaul in our workshop and is therefore in excellent condition, which you are welcome to inspect on site. Delivery time: on request Machine No.: 2102-xxxx Table: fixed angle table or swiveling rotary table Travel paths: X 300 mm / Y 160 mm / Z 340 mm Quill travel: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2000 rpm Tool holder: SK40 Feed: stepless 5–500 mm/min Rapid traverse: 1200 mm/min Features and accessories: 3-axis digital readout Heidenhain TNC113 with active control, stepless feed regulation in all 3 axes, coolant system, centralised lubrication, technical documentation, leveling feet, safety features (optional) Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly checked - All lubricants and, where necessary, worn parts are replaced in advance Iaedpepy Eldsfx Agtjl - Upon request, we will completely or partially overhaul your selected machine - Upon request, you can order additional accessories such as tools directly - Upon request, we can also mount further equipment such as safety devices directly - We are happy to take care of shipping and/or installation

Stav: dobrý (použitý), Rozmery: šírka 2000 mm, hĺbka 2000 mm, výška 1600 mm Stôl: 620 mm x 390 mm Hmotnosť stroja: cca 1500 kg Ovládanie: Dialog 4 Výbava: bezvôľové guľôčkové skrutky, hydraulické upínanie náradia SK40, elektrické ručné koliesko Iodpfx Ageu A Iuyotoal

Stav: nový, SSB F 60 Super VT PRO je výkonná stĺpová vŕtačka, ktorá je ideálna pre požiadavky v dielňach. Tento stroj spája modernú technológiu s robustným dizajnom, ideálny pre kusovú a malosériovú výrobu, ako aj pre vŕtanie, zahlbovanie, vystružovanie a rezanie závitov. Vďaka elektronicky riadenému servoposuvu vŕtacieho vretena a veľkej dotykovej obrazovke majú používatelia k dispozícii používateľsky prívetivé ovládanie a flexibilné nastavenie parametrov obrábania. Stabilná konštrukcia z kvalitnej liatiny a motoricky výškovo nastaviteľný stôl, otočný o ±45°, robia z modelu SSB F 60 Super VT PRO perfektný stroj pre využitie v oceliarstve a výstavbe hál. Stroj ponúka pôsobivý vŕtací výkon do 60 mm a automatický cyklus rezania závitov, čo optimalizuje efektivitu práce. Využite možnosť zakúpiť si SSB F 60 Super VT PRO pre svoje projekty – vyžiadajte si cenovú ponuku a presvedčte sa o kvalite značky KNUTH! Iedsq Rdqnopfx Agtoal

Stav: nový, Bernardo Universal Lathe Master 360 Pro Centre distance: 1000 mm Centre height: 180 mm Swing over bed: 360 mm Swing over gap*: 502 mm Swing over cross slide: 220 mm Bed width: 185 mm Spindle bore: 52 mm Spindle mount: DIN 55029, D1-5 Speed range (8 steps): 70 - 2000 rpm Longitudinal feed range (32 steps): 0.052 - 1.392 mm/rev Cross feed range (32 steps): 0.014 - 0.380 mm/rev Metric threads (26): 0.4 - 7.0 mm Inch threads (34): 4 - 56 TPI Quill diameter: 42 mm Quill travel: 100 mm Quill taper: MT 3 Motor output (S1 100%): 1.5 kW (400 V) Motor input (S6 40%): 2.2 kW (400 V) Machine dimensions (W x D x H): 1825 x 750 x 1600 mm Weight approx.: 576 kg *Removable bed section length: 205 mm Scope of delivery: • 3-axis digital readout i200 with LCD display • 3-jaw chuck DK11-200 mm / D5 • Faceplate 200 mm / D5, to DIN 55029 • Fixed steady rest – through-hole diam. max. 70 mm • Travelling steady rest – through-hole diam. max. 60 mm • Coolant system • Initial fill with Shell Tellus 46 • Extendable chip tray • Clamping plate 280 mm • Four-way tool holder • Safety cover for four-way tool post • Slip clutch • Micrometer longitudinal stop • Thread chasing dial • LED machine light • Reducing sleeve • Change gears • 2 dead centres • Foot pedal with brake function (CE compliant) • Motor with magnetic brake (CE standard) • Machine base with drawers Iodpfx Aed I H Izegtsal • Service tools

Stav: veľmi dobrý (použitý), Bore diameter: 1.5 – 165 mm Stroke: 80 – 160 mm Iajdswva Rnepfx Agtel Spindle speeds: 200 – 2500 rpm Stroke speed under load: 80 – 310 strokes/min Total power requirement: 0.9 kW Machine weight: approx. 0.6 t Space requirement: approx. 1.2 x 1.0 x 1.6 m Precision cross-honing machine with automatic measuring control Includes: Holders, small measuring table, digital dial gauge, tool accessories,

Stav: použitý, Rok výroby: 1955, Technické údaje: Maximálny priemer sústruženia nad lôžkom: 420 mm Maximálny priemer sústruženia nad suportom: 240 mm Maximálna dĺžka sústruženia: 1100 mm Maximálny priemer sústruženia v vybratí: 600 mm Rozsah otáčok: 24 - 900 ot./min, 8 stupňov Priemer vretenového otvoru: 41 mm Rozsah posuvu v smere X: 0,0120 - 0,1000 mm/ot. Rozsah posuvu v smere Y: 0,0062 - 0,0302 mm/ot. Upínanie pinoly koníka: MK 3 Posuv pinoly koníka: 220 mm Isdpfxou Ix D Ae Agteal Celkový príkon: cca 4,0 kW (bez záruky) Hmotnosť stroja: cca 1,2 t Rozmery stroja (D x Š x V): cca 2,3 x 0,9 x 1,3 m Výbava: 3-čeľusťové skľučovadlo Röhm Ø 200 mm 4-polohový držiak nástrojov, otočný o 30° vpravo/vľavo 2x upínacia drážka pre kopírovacie zariadenie Otočný hrot

Stav: dielensky repasované (použité), Rok výroby: 2001, Funkcionalita: plne funkčný, číslo stroja/vozidla: 3595, Dear Ladies and Gentlemen, For sale is a Weiler Commodor B lathe, year of manufacture 2001, equipped with a Heidenhain 3-axis digital display. The machine has undergone extensive partial overhauling in our workshop. Among other things, the main spindle bearing as well as the feed/lead screw bearing have been completely renewed! Technically, geometrically, and visually, the machine is in excellent condition, which you are welcome to verify on-site. Availability: on request Machine no.: 3595 Year of manufacture: 2001 Centre height: 180 mm Centre distance: 1000 mm Spindle bore: Ø 56 mm Max. spindle speed: 2000 rpm Tailstock taper: MT4 Feed range: 0.026 – 0.888 mm/rev Possible thread types: metric, imperial, module, diametral pitch Metric thread pitches: 0.35 – 12 mm Spindle brake: switchable Connected load: 4 kW Dimensions: approx. 2.2 x 1.5 x 1 m (L x H x W) Weight: approx. 1.8 t Further equipment and accessories: 3-axis digital display, coolant system, chuck guard, pull-out chip tray, Röhm 3-jaw chuck, Röhm 4-jaw chuck, various clamping jaws, etc. Our service promise to you: Ijdsthd Shspfx Agtjal - We are a certified master enterprise in mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul the selected machine - On request, we can repaint the selected machine in your desired color - On request, you can order additional accessories such as tools directly - On request, we can install further accessories such as safety devices - We are happy to assist with shipping and/or installation

Stav: použitý, Rok výroby: 1989, Universal milling machine Make: DECKEL Model: FP 1 Aktiv Year of manufacture: 1989 - shop-inspected Machine no.: 2102-5561 Milling head type: 2171 Milling head no.: 4393 Geometric acceptance with test protocol Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function on X, Y, and Z axes - Fixed table 600 x 210 mm (T-slot: 12 mm) Isdpfor En Dyox Agtjal - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Coolant system - Centralised lubrication, electric - Operating manual Used as seen, without warranty. The machine corresponds technically to the state of the art as of its year of manufacture.