Linka na strihanie na dĺžku

Delta-Alcos 72”x0.5”x60,000Lb

Stav: pripravené na použitie (použité), POPIS TECHNICKÉ PARAMETRE MATERIÁL Zvité pásy za studena, pozinkované HRÚBKA 0,4–2,5 mm ŠÍRKA ZVITKU 500–1550 mm MAXIMÁLNA HMOTNOSŤ SPRACOVÁVANÉHO ZVITKU 16 t VNÚTORNÝ PRIEMER ZVITKU 480–520 mm, 580–620 mm, 740–800 mm VONKAJŠÍ PRIEMER ZVITKU 1600 mm VNÚTORNÝ PRIEMER PÁSU 508 mm TOLERANCIA PÁSU 0,1 mm MINIMÁLNA ŠÍRKA PÁSU 20 mm MAXIMÁLNA ŠÍRKA PÁSU 1520 mm Dodpfx Afovupmdemjkg POČET PÁSOV / ŠÍRKA 0,4–1 mm: 20 pásov 1,01–2 mm: 10 pásov 2,01–2,5 mm: 8 pásov MINIMÁLNA VÝŠKA ODSTRIHU 8 mm (2 × 4 mm)

Stav: použitý, Rok výroby: 2016, číslo stroja/vozidla: 0401-230047, The FICEP Tipo G31 sheet processing center is designed for the efficient machining of steel plates and flat steel in steel construction and steel trade sectors. Dkodpfx Aerr Sqlefmsg The Ficep Tipo G31 LG can perform drilling, center punching, thread cutting, countersinking, marking, milling, oxy-fuel cutting, and plasma cutting on flat steel or sheet plates within a single system, accommodating a maximum plate width of 3,100 mm and a plate length of 14,000 mm. This CNC-controlled sheet processing center is equipped with two 26 kW drilling units. Two tool changers, each with 24 tool stations for ISO 40 tool holders, enable automatic tool changing. The system is suitable for plate sizes with the following dimensions: minimum plate width 200 mm, maximum 3,100 mm; minimum plate length 2,500 mm, maximum 14,000 mm. A powerful and modern Hypertherm HPR 400 XD plasma source is available for plasma cutting. In addition, the system is fitted with an oxy-fuel torch for cutting thick materials. The drilling unit, featuring high torque and spindle speeds up to 6,000 rpm, is designed for drilling with solid carbide tools—including solid carbide drills, Nenok Multiplex indexable insert tools—as well as for use with HSS coolant channel drills, for drilling diameters from 10 mm to 40 mm. The Ficep Tipo G31 system is in very good condition and has only a few operating hours.

Rok výroby: 1992, Stav: dobrý (použitý), 21 rovnacích válců, Ø 80 mm Dkjdpfx Afeg Iirnomsg Šířka pásu: 500–1 650 mm Tloušťka pásu: 1–5 mm

Stav: nový, Pre-bending: 13.0 mm Sheet length: 3100 mm Sheet thickness: 16.0 mm Total power requirement: 17.5 kW Approximate weight: 11.6 t Dimensions (LxWxH): 5.31 x 1.66 x 1.59 m Image similar Bending capacity: 16.0 mm » at 3x top roll diameter Pre-bending: 13.0 mm » at 1.5x top roll diameter Top roll diameter: 300 mm Bottom roll diameter: 270 mm Side roll diameter: 210 mm Max. opening: 50 mm Working height: 1140 mm Dksdpfx Asd Auacefmsg • Fully hydraulic drive of top and bottom rolls via planetary gearbox • Digital display for side roll positions • Hydraulic drop end bearing • Cone bending device • Hardened rolls • Hydraulic side roll adjustment synchronized via PLC • Hydraulic bottom roll adjustment via torsion shaft • Pressure-adjustable bottom roll • Electrical and hydraulic overload protection • Mobile control panel • Operating instructions in GERMAN and ENGLISH • Machine and equipment in accordance with CE regulations Important points for cone rolling: • Maximum sheet thickness is 50% of the rated capacity • The cone length must be a maximum of 30% or more than 60% of the roll length • Hardened rolls are recommended

Stav: nový, Capacity 15,000 kg Length 10,000 mm Width 2,450 mm Height 625 mm Rear axle: steerable Front axle: steerable Tyre dimensions: 425 x 260 mm Machine weight approx. 2.9 t Required space approx. 11.7 x 2.5 x 0.625 m Dsdjfrzvlspfx Afmekg Heavy-duty trailer with: - Double turntable steering - Small turning radius - Tip-over protection due to steering angle limiter - Robust, low-maintenance design - Interchangeable drawbar, length 1,320 mm - Impregnated wooden platform - Standard paintwork varies. On request, available in your RAL colour. Do you require other load capacities or dimensions? Please contact us.

Rok výroby: 2002, Stav: dielensky repasované (použité), Line for cutting, drilling, and marking beams CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial number: 122.400 Weight without accessories: 10,980 kg - Downstroke circular saw. - Saw unit with gearbox, drive system, and saw blade mounted on a wear-resistant rotary bearing. - Heavy-duty saw gearbox with helical, hardened, and ground gear wheels in an oil bath. - Hydraulic saw blade feed, adjustable according to table, with rapid return. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return stroke limitation. - Vertical clamping block with self-adjusting pressure plate. - Mitre cutting device for angle adjustment from 45° left to 35° right. - Material sensor for automatic switch from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector installed on the machine table. Specifications: - Saw blade accommodation: 100x4x30x250 mm - Saw blade diameter: 1,430 mm - Cutting width: 9.5 mm - Cutting speed: 10 to 20 m/min - Saw feed rate: 0–400 mm/min - Rapid return speed: 2,000 mm/min - Total power: 25 kW - Working height: 640 mm Cutting capacities: 90° cut - Angle steel: 250 mm - U profile: 400 mm - Double T-beam: 600 mm - Wide flange beam: 1,008x302 mm - Special flange beams: 1,000x450 mm Mitre cutting: IPBv beam - 75°: 1,008x302 mm - 60°: 910x302 mm - 45°: 716x304 mm - 40°: 716x304 mm - 35°: 478x307 mm IPBs beam - 75°: 1,008x402 mm - 45°: 524x357 mm IPE beam - 45°: 600x220 mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial number: 122.401 Dkedohzbipopfx Afmjg Working capacities: - Angle steel (min–max): 80x65x10 mm – 250x250x28 mm - U profile (min–max): 80x45 mm – 400x110 mm - Double T-beam (min–max): 80x46 mm – 600x220 mm - Wide flange beam (min–max): 100x100 mm – 1,008x302 mm - Extra wide flange beam: 1,200x500 mm Drilling units: 3 - Vertical (Y axis) 1 unit - Horizontal (Z and W axes) 2 units Drilling diameters: 8–40 mm Spindle speeds: 150–1,100 rpm Rapid feed/rapid return: 3,850 mm/min – 8,000 mm/min Drilling spindle feed: 0–500 mm/min Rapid spindle positioning: 15,000 mm/min Automatic tool changer: 5 tools per drilling unit. 3x5 = 15 tools total Total power: 45 kW MARKING UNIT FEEDING SYSTEM: 26 METERS INFEED WITH BEAM FEEDER + 6 LATERAL ARMS FOR BEAM LOADING IN PARALLEL TO ROLLER CONVEYORS 30 METERS OF ROLLER CONVEYORS WITH OUTFEED + 6 LATERAL ARMS 4 LATERAL ARMS FOR SHORT LENGTHS THE MAJORITY OF ROLLERS ARE MOTORIZED Total installation length: approx. 60 linear meters including infeed and outfeed. *Installation drawings available upon request.

Stav: použitý, Hydraulic Guillotine Shear STEINER Type HTS 30/20 R Machine No. 315 Year of Manufacture: 1982 Cutting Length: 3050 mm Cutting Thickness: 20 mm Back Gauge: 800 mm, motorized Motor Power: approx. 30 kW Power Supply: 400 Volt, 50 Hz - Back gauge with ELGO positioning control - Back gauge adjustment via ball screw spindles - SICK safety light curtain at the front as reach-in protection - 3 material support arms with ball rollers - Electric foot switch - Spare blades - Oil cooler with air heat exchanger - Very heavy-duty machine, robust construction Base machine footprint (L x W x H): 4650 x 2610 x 3200 mm Base machine weight: 27,000 kg Dedpfxed Hxx Ao Afmokg Transport dimension (base machine) (L x W x H): 4650 x 2610 x 3200 mm Transport dimension (additional) (L x W x H): 3500 x 2450 x 1400 mm Total weight: 27,000 kg Good condition The machine can be inspected at our warehouse in 37235 Hessisch Lichtenau, test cuts possible.

Stav: použitý, Rezacia linka SECO 60″ x 0,375″ x 50 000 libier (A3791) je ideálnym riešením pre pozdĺžne delenie kovových zvitkov na pásy, s maximálnou hrúbkou materiálu 0,375″ a maximálnou šírkou zvitku 60″. Spracováva valcovanú za studena aj za tepla oceľ Šírka pásu: 18–60″ Dvojrýchlostná prevodovka: 200–500 stôp/min Hrúbka: 0,032″–0,375″ Kompletná linka obsahuje nasledujúce komponenty: - Vstupný vozík na zvitky v tvare L Maximálna hmotnosť zvitku: 18 000 kg (40 000 libier) Dksdstiy Ntspfx Afmjg Vyvažovač zvitkov (odvinovač): Vnútorný priemer zvitku: 584–775 mm (23–30,5″) Vonkajší priemer zvitku: max. 1 829 mm (72″) Maximálna hmotnosť zvitku: 18 000 kg (40 000 libier) Posuvná základňa Hydraulická expanzia Zariadenie na odlepenie a prítlačný valec - 5-valcová rovnacia jednotka - Vstupné nastaviteľné vodiace lišty - Vstupné nožnice na odstrihnutie konca Rezacia hlava: Hriadele s priemerom 254 mm (10″) Pohon motorom s výkonom 40 HP - 2 navíjače odpadu Navíjač (recoiler): Vonkajší priemer zvitku: max. 1 829 mm (72″) Vnútorný priemer zvitku: 610 mm (24″) 150 HP DC motor - Trojramenný výstupný turniket Nosnosť každého ramena: 18 000 kg (40 000 libier) Motorické otáčanie Kompletná linka je dodávaná s nožmi, gumami a dištančnými podložkami. Ovládanie, hydraulika a elektroinštalácia sú súčasťou dodávky.

Stav: veľmi dobrý (použitý), Rok výroby: 1996, Technické údaje: Maximálna šírka rezu: 3100 mm Maximálny rezný výkon pri oceli St40: 15,0 mm Motoricky nastaviteľný paralelný doraz: 1500 mm Motoricky nastaviteľná šírka rezu Nastavenie uhla rezu Pracovná výška: 860 mm Výkon motora: 22 kW Bočná ochranná mriežka s bezpečnostným svetelným závorom vzadu Rozmery (dĺžka x šírka x výška): cca 4650 x 3600 x 2050 mm Hmotnosť: cca 13,5 t Dsdpfjummw Tsx Afmekg Môžeme ponúknuť len malú časť nášho aktuálneho sortimentu použitých strojov. Navštívte aj našu webovú stránku! Predávajúci nezodpovedá za preklepy alebo chyby pri prenose údajov. Stroj zodpovedá svojím vzhľadom, technikou a opotrebením svojmu veku; použité stroje sa predávajú bez akejkoľvek záruky.

Stav: dobrý (použitý), Rok výroby: 2002, Výrobca: BRÜCK Dkjdpfx Ajhrnbksfmeg Typ: 12/1600 Nosnosť: 12 000 kg Maximálna šírka plechu: 1 600 mm Priemer zvitku: 1 800 mm Hmotnosť: cca 14 t Bez ovládacej skrine.