Laserový rezací systém

DNE - member of Bystronic group D-Soar Plus 2040 - 12000 Watt

Laser power: 12,000 watts
Working area (laser operation): 4000 x 2000 x 270 mm
Positioning speed X/Y/Z: 200 m/min
Simultaneous: 280 m/min
Maximum workpiece weight: 3,000 kg
Max. mild steel: 30 mm
Max. stainless steel: 30 mm
Max. aluminium: 25 mm
Max. copper: 10 mm
Max. brass: 20 mm
Length: 12,500 mm
Width: 3,650 mm
Height: 2,620 mm
Machine weight: 18,000 kg

Standard features
Main components
1. Fiber laser source: D-Soar (_CE&UL), Raycus
2. Cutting head: Bystronic DNE (Copyrighted)
3. Cutting software: Bus-control cutting software Hypcut FSCUT 8000C
4. Rack & pinion (X&Y axis): M3 by Herion
5. Shuttle table: Parallel shuttle table (two levels)
6. Ball screw: TBI (Taiwan)
7. Linear guide: Won (South Korea)
8. Reduction gearbox: Neugart (Germany)
9. Servo drive & motor: Inovance or Schneider
10. Machine base: Welded machine frame
11. PC: I7 CPU, 8GB RAM, 120GB SSD, 10kW
12. Monitor: Capacitive touchscreen (21.5-inch XC-2209CMDR)
13. Proportional valve: Felton low pressure, 10kW
14. PLC hardware: Schneider
15. Solenoid valve: High pressure—CEME; low pressure—Airtac
16. Gantry: Aviation-grade aluminum cutting bridge, precision die-cast
17. Chiller: S&A custom
18. Electrical control cabinet: Independent control cabinet (Bystronic DNE Copyrighted)

Electrical connection (machine including laser source and chiller)
The supply voltage provided by the utility operator must comply with EN 50160 and IEC 60364-1 standards; stable voltage is a prerequisite for consistent performance. Mains supply must not show voltage fluctuations across the tolerance range, such as may be caused by spot-welding equipment. If such a voltage supply cannot be ensured at the machine’s installation site, a transformer and/or voltage stabilizer must be installed.
Machine power supply, including laser module: 3 phase & PE
Power system: TN
Mains frequency: 50/60 Hz
Supply voltage: 3 x 380 V
Max. permissible voltage fluctuation 50 Hz: +/-10%
Max. permissible voltage fluctuation 60 Hz: +6 / -13%
Fuse: 150 AT
Machine: 9 kW
Hydraulic shuttle table: 15 kW
Extraction: 7.5 kW
Resonator: 36 kW
Chiller: 15 kW
Total connected load*: 80.5 kW
Podev Uz Tispfx Afpsgw
cos (φ): 0.83
Average power requirement: 30.75 kW
*Values measured at full laser power and ambient temperature of 20°C. Values based on assumed average material mix.

Compressed air (machine, laser source, chiller, extraction system)
Compressed air quality must meet ISO 8573-1:2001. To avoid contamination risk from the compressor, an oil-free screw compressor with downstream air preparation (air dryer) is required.
Min. counterpressure at supply unit: 20 bar
Max. consumption: 1.05 m³/min
Max. compressed air temperature at the maintenance unit inlet: 43°C

Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.