Vysokorýchlostná radiálna vŕtačka

DONAU Danumeric 440

Stav: dobrý (použitý), Rok výroby: 2000, Funkcionalita: plne funkčný, vŕtacia kapacita: 40 mm, ťah perom: 200 mm, priemer pinoly: 80 mm, Machine Version • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots, 18 mm, at the rear of the machine base • 2 T-slots, 18 mm, on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 T-slot spacing mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – min mm 70 Table top max. mm 680 Distance spindle nose – min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Infinitely variable feeds mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axes over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat panel, backlit, easily readable from all sides, 215 x 160 mm Position display: Cartesian or polar, values absolute or incremental Unit: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram technology: yes Machining Cycles Standard software options: Conversational programming, 38 zero point shifts, rotation and mirroring, teach-in for X,Y,Z, program restart with selective re-entry Zero point determination: Cycles for zero point determination by manual probing of the workpiece for: - Freely mounted rectangular parts - Freely mounted round parts - Positioning of cast and flame-cut parts - Angle detection by probing reference edges/surfaces on round parts Prsdpfx Afeu Aa I Sspjd Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stav: dobrý (použitý), Funkcionalita: plne funkčný, ťah perom: 190 mm, otáčky vretena (min.): 41 ot./min, maximálna rýchlosť vretena: 1 800 ot./min, celková hmotnosť: 1 920 kg, hmotnosť obrobku (max.): 17 kg, max. hrúbka oceľového plechu: 32 mm, krútiaci moment: 250 Nm, výška stola: 900 mm, Used DONAU rapid radial drilling machine Type DR 32 - completely overhauled by vaumatec in 2022 - with SPECIAL TABLE TOP (clamping area 1400 x 1000 mm with coolant channel and drain, as well as 4 support feet for relieving the table frame) Technical specifications: Drilling capacity (solid material): St 60/E335 mm Ø 32 (at feed 0.20 mm/rev): GG 22 mm Ø 45 Thread cutting: St 60/E355 M26 Thread cutting: GG22 M35 Tool holder: MT4 Column diameter: mm Ø 195 Distance spindle nose-table: min./max. mm 260/660 Worktable height: mm 900 Quill travel: mm 190 Column travel: mm 400 Spindle speeds, range I: rpm 41-1800 Feeds: mm/rev 0.1-0; 15-0; 20-0.3 Torque at spindle: max. Nm 250 Boom ease of movement: Radial N 25 Boom ease of movement: Axial N 25 Clamping force: Radial Nm 3500 Clamping force: Axial N 5500 Feed force: N 7500 Max. permissible mass: kg 17 Max. permissible moment of inertia: kgm 0.002176 Prsdpjrn Riqefx Afped Workpiece: Max. table load: kg 1000 Center of gravity: centered on working surface

Stav: dobrý (použitý), Rok výroby: 1997, Funkcionalita: plne funkčný, vŕtacia kapacita: 40 mm, ťah perom: 200 mm, priemer pinoly: 80 mm, Machine Version • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots, 18 mm, at the rear of the machine base • 2 T-slots, 18 mm, on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 T-slot spacing mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – min mm 70 Table top max. mm 680 Distance spindle nose – min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Infinitely variable feeds mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axes over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat panel, backlit, easily readable from all sides, 215 x 160 mm Position display: Cartesian or polar, values absolute or incremental Unit: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Prjdsrmkfnopfx Afpjd Tool management: max. 500 tools Subprogram technology: yes Machining Cycles Standard software options: Conversational programming, 38 zero point shifts, rotation and mirroring, teach-in for X,Y,Z, program restart with selective re-entry Zero point determination: Cycles for zero point determination by manual probing of the workpiece for: - Freely mounted rectangular parts - Freely mounted round parts - Positioning of cast and flame-cut parts - Angle detection by probing reference edges/surfaces on round parts Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stav: generálne opravený (použitý), Rok výroby: 1997, Funkcionalita: plne funkčný, vŕtacia kapacita: 40 mm, ťah perom: 200 mm, priemer pinoly: 80 mm, Danumeric 440, fully overhauled and digitized in 2024 Machine Specification • Worktable 1800 x 600 mm with 4 T-slots • Traverse path of arm: 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servomotor • 2 T-slots (18 mm) on rear machine base • 2 T-slots (18 mm) on left machine base • Tapping attachment • Central lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Pedpfxju Dg D Ae Afperd Tool holder: SK 40 Column diameter: 195 mm Table size: 1800 x 600 mm Number of T-slots: 4 T-slot spacing: 125 mm Quill travel (Z-axis): 200 mm Column travel (W-axis): 410 mm Distance spindle lower edge – table top min.: 70 mm, max.: 680 mm Distance spindle lower edge – floor min.: 970 mm, max.: 1580 mm Drilling radius: 540 – 1590 mm Working table height: 900 mm Machining Data Drilling capacity (solid): St 60 Ø40 mm, GG 22 Ø50 mm Thread cutting: St 60 M36, GG 22 M42 Main Spindle Drive AC motor, frequency controlled, 5.5 kW at 100% duty cycle Speed range: 15 – 2,800 rpm Torque: max. 250 Nm, constant from 15–2,000 rpm Feed Drives X-axis – AC servo motor: 0.25 kW Y-axis – AC servo motor: 0.25 kW Z-axis – AC servo motor: 4.50 kW W-axis – AC servo motor: 2.50 kW Rapid traverse speeds (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse (W-axis): 3 m/min Infinitely variable feed: 5 – 2,000 mm/min Accuracy Positioning accuracy X, Y axes over 1,200 mm: ±0.075 mm Electrical Data Operating voltage / frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit (clamping): 0.75 kW Total connected load: 13.0 kVA Weight of Danumeric 440 (without packaging) with 1800 x 600 mm table: 2,800 kg CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat screen, backlit, legible from all sides, 215 x 160 mm Position display: Cartesian or polar; absolute or incremental readings Units: mm or inch, or in degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tooling suggestions based on machining type, material-dependent cutting data suggestions Tool management: Maximum 500 tools Subroutines: Yes Machining Cycles Standard software options: Conversational programming, 38 zero point offsets, rotation/mirroring, teach-in for X, Y, Z, restart in program with selectable targeted entry functions Zero point determination: Cycles for determination of zero points by manual probing of the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Centering of cast and flame-cut parts - Angle detection on round parts via probing reference edges/faces Test-graphic: Graphic display of drilling patterns Data interfaces: USB

Stav: dobrý (použitý), Rok výroby: 2004, pojazdová vzdialenosť osi X: 1 800 mm, zdvih osi Y: 2 000 mm, výrobca ovládačov: HEIDENHAIN, model regulátora: ITNC 530, CONTROL .. CNC control: HEIDENHAIN iTNC 530 WORKING AREA -CUBIC- .. Number of machining axes (excluding parallel axes): 5 .. Travel X-axis: 1800 mm .. Travel Y-axis: 2000 mm .. Travel Z-axis: 1100 mm TABLE .. Clamping surface (left-right): 1700 mm .. Clamping surface (front-back): 1400 mm .. Max. workpiece weight: 5000 kg SPINDLE / HEAD .. Speed range up to: 10,000 rpm .. Tool holder: HSK A100 .. Drive power S6 40%: 44 kW .. Drive power S1 100%: 32 kW TOOL MAGAZINE .. Number of tool positions: 100 ELECTRICAL CONNECTION DATA .. Supply voltage: 400 V .. Mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. Required floor space (left/right): 8400 mm .. Required floor space (front/back): 9000 mm .. Overall height: 4200 mm .. Total weight approx.: 35,000 kg ADDITIONAL EQUIPMENT FOR DRILLING/MILLING .. Chip conveyor: yes .. Coolant system: yes .. Belt filter: yes .. Internal coolant supply (ICS): yes .. Fully enclosed work area: yes .. CE compliant: yes Equipment: - Heidenhain TS 641 infrared probe - Coolant tank 900 l - ICS 40 bar through spindle center (AD) - Rotating inspection window - Electronic handwheel - 3D path control Prjdpoxtiwcofx Afpjd Optional: - Hydraulic clamping system (Stark)

Stav: použitý, Rok výroby: 2014, DMC DL 80V CNC vertikálny sústruh Rok výroby: 2014 Psdpfxevr Ecpj Afperd Priemer sústruženia: 800 mm Dĺžka sústruženia: 750 mm Vreteno: 30 kW, 2000 ot./min Revolver s 12 pozíciami Skľučovadlo: 21" Ovládanie: Fanuc Oi-Td Hmotnosť stroja: 9800 kg So synchrónnym dopravníkom triesok a štandardným príslušenstvom

Stav: dobrý (použitý), Rok výroby: 2004, celková hmotnosť: 40 000 kg, lisovacia sila: 450 t, AXIAL 4100x450t + Cybelec ModEva 10 + 5 axes (Y1, Y2, X, R, Z) + WILA CNC crowning table + WILA hydraulic punch and die clamping Bending length: 4,100 mm Press force: 450 t Stroke: 365 mm Axes: 5 axes (Y1, Y2, X, R, Z) *Z axis (pins with double prismatic guidance) WILA hydraulic clamping for punch and die WILA CNC crowning table Ram speeds: Approach speed: 110 mm/sec Working speed: 8 mm/sec Return speed: 90 mm/sec Distance between uprights: 3,600 mm Throat depth: 410 mm Podpfxou Au U Ts Afperd Open height (distance between table and ram): 500 mm Pit depth: 975 mm CNC: Cybelec ModEva 10 (Control unit CPU new as of September 2023) Safety laser: DSP LASER - TX Weight: 40 t Motor power: 30 kW

Stav: nový, Rok výroby: 2024, Funkcionalita: plne funkčný, pojazdová vzdialenosť osi X: 700 mm, zdvih osi Y: 500 mm, zdvih osi Z: 540 mm, rýchloposuv os X: 48 m/min, rýchly posuv osi Y: 48 m/min, rýchloposuv osi Z: 48 m/min, model regulátora: Heidenhain TNC 640, celková výška: 29 620 mm, celková dĺžka: 32 000 mm, celková šírka: 28 480 mm, zaťaženie stola: 200 kg, priemer otočného stola: 380 mm, celková hmotnosť: 6 000 kg, maximálna rýchlosť vretena: 12 000 ot./min, prívod chladiacej kvapaliny: 36 lišta, Výbava: dokumentácia / manuál, dopravník triesok, Victor 5-axis machining center VC-AX380 with Heidenhain TNC640 control 5-axis simultaneous machining incl. KinematicsOpt calibration tool and calibration sphere. Standard options: - Coolant system with high-pressure coolant pump MTH4-40/4 and supply hoses - Full-enclosure coolant cabin - Spindle oil cooler - Oil separator - Spiral chip conveyor - Rinse and air gun - Operating tools and manuals Additional options: - Through-spindle air supply - Air conditioning unit in control cabinet Prjdpfxoq Tafxo Afpjd - Chip conveyor - 40 tool positions - 36 bar internal coolant supply (IKZ) with Mahle duplex filter - Table flushing system - Workpiece probing system TS460 - Automatic door - Interface - 8" 3-jaw chuck Images are exemplary and may differ from the original. Available from stock in Bergneustadt (subject to prior sale).

Rok výroby: 2018, Stav: použitý, X-axis travel: 1600 mm y-axis travel: 1300 mm z-axis travel: 700 mm Distance between columns: 1500 mm Distance spindle center to table: 225–925 mm Table size: 1800 x 1300 mm Table load capacity: 4000 kg T-slots (Width x Pitch x Number): 22 x 160 x 8 mm Spindle taper: HSK-A 63 Spindle speed: 24,000 rpm Spindle motor: 25/33 kW Spindle motor torque: 72.6/95.8 Nm Rapid traverse on X-Y-Z axis: 30,000 mm/min Feed rate X/Y/Z axis: 1–20,000 mm/min Tool changer: 20 stations Max. tool diameter: 100/130 mm Max. tool length: 300 mm Max. tool weight: 8 kg Total power requirement: 80 kVA Machine weight approx.: 22 t Machine dimensions (LxWxH): 5660 x 5295 x 3930 mm CNC control: Heidenhain TNC 620 Spindle: IBAG electric spindle 24,000 rpm HSK-A63 Glass scales: Heidenhain Tool changer: 20 stations Chip conveyor – spiral: 2 pcs. Used CNC high-speed portal milling machine with extensive accessories at a special introductory price. Key component manufacturers for this stock machine: Pedpfxohx R Dvs Afperd · Controller and servo motors: Heidenhain, type TNC 620 · Ball screw bearings: Japan NSK · X ball screw: Taiwan Hiwin · Y ball screw: Taiwan Hiwin · Z ball screw: Taiwan Hiwin · 3-axis linear guides: Japan THK or Germany Rexroth · Electric spindle unit: HSK A63–24,000 rpm from IBAG · Linear encoders: Heidenhain · Pneumatic system: Japan SMC · Lubrication: Japan Showa · Covers: Hema · Air conditioning: Taiwan Kaokung · Spindle water cooler: Made in Taiwan · 3-axis cable drag chain: Germany Igus · Couplings: Germany KTR · Enclosure: Germany Mecano · Relays: Omron · Electrics: Germany Schneider · MPG handwheel: Japan Tosoku For further information on the machine, standard accessories, and optional extras, please refer to the attached documents. Of course, we are happy to organize delivery to your premises, including installation/commissioning, handover ready for operation, and operator training.

Stav: veľmi dobrý (použitý), Priemer sústruženia nad lôžkom: 320 mm Vzdialenosť medzi hrotmi: 800 mm Otáčky vretena: až 4000 ot/min Riadenie: HEIDENHAIN Manual Plus M Rôzne príslušenstvo Predpfxsi Ezhqj Afpsd MARCELS MASCHINEN CH