Vysokorýchlostná radiálna vŕtačka

DONAU Donaumeric 440

Stav: dobrý (použitý), Rok výroby: 2021, Funkcionalita: plne funkčný, číslo stroja/vozidla: PRJ062775, Machining Performance: Drilling capacity in solid St 60/40 mm Drilling capacity in solid GG 20/50 mm Thread cutting capacity St 60/M 36 Thread cutting capacity GG 20/M 42 WORKING AREA: Travelling distance of arm (Y-axis): 1050 mm Column travel (W-axis): 410 mm Quill stroke (Z-axis): 200 mm Distance spindle nose to table surface, drilling radius: 80–690 mm Swivel angle (C-axis): 330 degrees Central clamping of arm and column MACHINE TABLE Clamping surface of work table: 1800 x 600 mm With 4 T-slots according to DIN 650 in X direction (width/spacing): 18 h9/125 mm Table height: 900 mm CONTROL / OPERATION CNC control S-Box III Processor: 32-bit CPU Screen: TFT flat panel, backlit, easily readable from all sides. 215 x 160 mm, cartesian or polar. Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions according to type of machining, material-dependent cutting data suggestions Tool management: max. 500 tools Machining cycles: cycles for centering, drilling, tapping, reaming, countersinking, and boring Chip breaking/cooling: possible during drilling cycle Hole patterns: row of holes, hole circle, matrix Basic software: dialog programming, 38 zero points storable, rotation and mirroring, teach-in for X, Y, Z Test graphics: graphic display of drilling patterns Data interfaces: V.24/RS 232-C USB: For importing and exporting data, industrial 256 MB MAIN SPINDLE DRIVE: Three-phase asynchronous motor with frequency control Drive power (100% duty cycle): 5.5 kW Torque (100% duty cycle): 250 Nm, constant from 15–200 rpm Spindle speed, infinitely variable: 12–2800 rpm Taper spindle: Tool holder according to DIN 69871 SK40 with pull stud according to DIN69872-19 AXIS DRIVES: C-/Y-/Z-/W-axis: max. 0.35/0.35/2.90/2.40 kW Rapid traverse, stepless: C axis: max. 4.5 rpm Y/Z axis: max. 7.5/5.0 m/min W axis: max. 3.0 m/min Feed rate, stepless: C-/Y-/Z-/W-axis: 5–2000 mm/min Feed force (Z-axis): max. 12,000 N LUBRICATION Central lubrication by hand MACHINE GUARDING Safety fence system with mesh panels arranged around the machine. Outer dimensions: 6000 x 6000 mm (W x H), system element height approx. 2000 mm 1 access gate (double-wing door at the machine front), opening width approx. 2,000 mm Operation manual opening and closing. Safety door switch with magnetic interlock. ELECTRICAL, PNEUMATIC, HYDRAULIC EQUIPMENT, CONNECTED LOAD Power supply: 400/50 Volt/Hz Control voltage: 24 Volts, Power consumption: 13 kVA, Fusing: 35 A Operating voltage: 3 x 400 Volt AC/ N / PE +5% -10%, N conductor loadable. Frequency: 50 Hz PAINT DD textured coating Machine upper part: light grey RAL 7035, machine base: RAL 5023 TRANSPORT DIMENSIONS Gtsdpfswmcatox Adyst Width: 1,900 mm Depth: 2,565 mm Height: 2,788 mm MACHINE WEIGHT Machine as transport unit with standard table: approx. 2,950 kg OPTIONS: Base plate with surrounding coolant channel. Clamping surface 1000 x 1400 mm. Height 100 mm with 4 T-slots Electronic probe incl. SK 40 holder Pick-up tool magazine Programmable tool change for rear work station. The magazine with 5 tool stations including cover is mounted on the right side of the machine Coolant device, version A integrated in the machine base for machines without special base plate, consisting of: coolant tank with capacity 35 l, coolant pump with complete fittings, delivery approx. 40 l/min at 0.4 bar.

Stav: nový, Instead of €14,874 gross (RRP), now only €9,499 net (€11,304 gross incl. 19% VAT). You save 24% off the RRP! Straightening Press 150 tons with electric motor and additional manual operation via a hand lever pump, especially suitable for precision work. Available versions: 30t 60t 100t 150t 200t >200t: on request Custom machines: on request Brand new machine! We are also happy to build a custom press to your specifications. High-quality hydraulic workshop press with a maximum pressing force of 150 tons. The press can be operated conventionally in electric mode via a lever for up and down movement. For precision tasks (e.g. pressing bearings, straightening, etc.), the press is also equipped with a hand pump, allowing fine manual control of the pressure. The pressure cylinder is mounted on a sliding carriage, so it can be shifted sideways, allowing you to fully utilize the maximum frame width. Key features: Gsdpfx Aef Sqcksdyott - 150 tons maximum pressing force - Pressure gauge included - 2 operating modes: electric or manual - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety features - Adjustable daylight opening - Lifting chains for easy adjustment of the opening height - Heavy-duty machine frame - Cylinder laterally adjustable (mounted on a sliding carriage) The press can be tested under power on site. ----- Numerous other workshop presses available in various designs, sizes, and with optional accessories! 30, 60, 100, 150, 180, 200 tons. ----- Please feel free to contact us for professional and non-binding advice. The specified price is net plus 19% VAT. All information subject to change! Europe-wide delivery possible! ----- The European Commission provides a platform for out-of-court online dispute resolution (OS platform). This offer serves solely as an online presentation of our goods. Contract negotiations are conducted via telecommunications (email, fax, phone, messaging portal), during which we first provide you with a non-binding offer and also inform you about our terms and conditions and the right of withdrawal, including our legal notice, before any purchase or contract is concluded.

Stav: nový, Rok výroby: 2024, zdvih osi Y: 600 mm, zdvih osi Z: 450 mm, - Simple graphical programming, including GoTo function in manual mode - Processing lengths from 3,000 to 16,500 mm, depending on configuration - Free programming in DIN/ISO (G-codes) - 2-axis interpolation for X/Y axis, including arcs - 3-axis linear interpolation (X/Y/Z) - 3-axis interpolation (X/Y/Z) for helical milling and thread milling - Rapid traverse X-axis = 30 m/min, Y-axis = 25 m/min Main spindle BT 40 - 5-fold bearing system, diameter 110/60 mm (3 x angular contact ball bearings 7212, 2 x deep groove ball bearings 6212) - Suitable for both high axial and radial loads = drilling and milling - Maximum tool length: 290 mm - Maximum tool diameter: 88 mm X-axis guide - 2 pieces 45 mm linear guides, each with 2 fully ball-equipped carriages X-axis drive - Helical precision rack, travel length 3,000 to 16,500 mm Y-axis guide - 2 pieces 35 mm linear guides, each with 2 fully ball-equipped carriages Y-axis drive - Ball screw, diameter 25 mm, travel length 600 mm Z-axis guide - 2 pieces 35 mm linear guides, each with 2 fully ball-equipped carriages Z-axis drive - Ball screw, diameter 32 mm, travel length 450 mm Gtedpjrb Afasfx Adyot Standard version Automatic tool changer with 10 positions, mounted in the machine column

Stav: nový, Rok výroby: 2023, Rúrková vŕtačka, šikmá vŕtačka, automat na vŕtanie TDM100, manuálny, s jednou vŕtacou hlavou DOSTUPNÉ IHNEĎ ZO SKLADU + MOŽNOSŤ PRIORITNÉHO ODOSLANIA A PREVÁDZKY POD PRÚDOM - Minimálne dávkované mazanie - Manuálne upínanie materiálu - Manuálny posuv - Max. dĺžka rúrky 3 000 mm (voliteľne 6 000 mm) - Presnosť polohovania +/- 0,2 mm - 10 dorazov (možnosť rozšírenia) - Vkladanie a vyberanie materiálu manuálne - Vŕtacia hlava výkyvná +/- 50° - Manuálne otočné zariadenie s rozsahom 360° pre rúry - Výkon vŕtacej jednotky 1 x 2,2 kW - Otáčky motora 295 - 2 950 ot./min. - Zobrazenie otáčok na dotykovom paneli - Osvetlenie vŕtacej jednotky - Integrovaná skrinka na náradie - Kruhové rúrky do 114 mm - Štvorcové profily do 100 x 100 mm - Plochý materiál do 100 x 15 mm Godpelgvkiefx Adystt - T-profily do 100 x 100 x 12 mm - L-profily do 100 x 100 x 8 mm - Dvojité stĺpy do 100 x 15 mm - Trecie vŕtanie do M12 - Vŕtacie otvory do Ø 50 mm

Stav: takmer ako nový (použitý), Rok výroby: 2021, Technické údaje: Kónická ohýbačka Pracovná šírka: 1050 mm Max. ohýbací výkon pre bežnú oceľ St40: 4,0 mm Priemer kónického horného valca: 70 - 185 mm Gtsdpew An Uhofx Adyet Priemer bočných a stredného spodného valca: 105 mm Kónické ohýbacie zariadenie Pojazdný ovládací panel s digitálnym displejom Hydraulické otočné ložisko CE značka Výkon motora: 5,5 kW Rozmery (dĺžka x šírka x výška): cca 3600 x 1200 x 1200 mm Vlastná hmotnosť: cca 3 tony Stav: veľmi málo používaný, stav ako nový Predávajúci nezodpovedá za chyby v písaní alebo prenose dát. Stroj je po vizuálnej, technickej stránke a opotrebovaní zodpovedajúci veku; použité stroje sa predávajú bez akejkoľvek záruky.

Rok výroby: 2024, Stav: nový, Jib-Ausladung: 5 m Gesamtsäulenhöhe: 5,5 m Tragfähigkeit: 80 kg Gtjdpfx Asvzhhtedyet Hakenweg: 4,3 m *NEU* Unbenutzt *Originalverpackung* DEMAG Säulenschwenkkran – Traglast 80 kg Mit E-Kettenzug, Kran DEMAG Typ DCM-Pro 2 80 1/1 H4.3 V16/4 - Baujahr: – - Max. Hakenweg: 4,3 m - Kettengröße: 4,2 x 12,2 RDC/TDK - Netzanschluss: 380–415 V - Steuerspannung: 24 V

Stav: použitý, Kuter Gedpfxstu I T Ej Adyett Výrobca: Seydelmann Model: K 204 Ultra Vyrobený z nehrdzavejúcej ocele Objem: 200 litrov 2 rýchlosti nožov 2 rýchlosti misy 2 rýchlosti miešania Rozmery: 280x205x255 cm Elektrický výkon: 78 kW Napätie: 400 V, 3 fázy, 50 Hz

Stav: nový, Univerzálna frézka Značka: OPTimill Model: MT 50 Katalógové číslo: 3336005 Stav: Nový stroj Pojazdy: - Os X 580 mm - Os Y 200 mm - Os Z 340 mm Štandardne vybavená: - 3-osý digitálny odpočet DPA 31 PLUS - Automatický posuv v osi X - Dlhý frézovací trn 16 mm - Dlhý frézovací trn 22 mm - Upínanie skľučovadla B 18 - Ozubené vrtacie skľučovadlo 3-16 mm/B 18 - Redukčná puzdro MK 2 s vyražacou štrbinou - Redukčná puzdro MK 3 s vyražacou štrbinou - Strojové svetlo - Zariadenie na chladenie - Ovládacie náradie Gsdobnfxujpfx Adyott - Návod na obsluhu

Stav: dobrý (použitý), Funkcionalita: plne funkčný, Rok výroby: 1989, počet valcov: 3, Horný valec 280 mm, predohýbanie 12 mm, kapacita 18 mm (3x priemer horného valca). Hmotnosť 7 100 kg. Gtsdpfjwtp Haex Adyet

Stav: dobrý (použitý), Rok výroby: 2000, Funkcionalita: plne funkčný, vŕtacia kapacita: 40 mm, ťah perom: 200 mm, priemer pinoly: 80 mm, Machine Version • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots, 18 mm, at the rear of the machine base • 2 T-slots, 18 mm, on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 T-slot spacing mm 125 Quill stroke (Z-axis) mm 200 Godpfxju Aa I Sj Adyjtt Column travel (W-axis) mm 410 Distance spindle nose – min mm 70 Table top max. mm 680 Distance spindle nose – min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Infinitely variable feeds mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axes over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat panel, backlit, easily readable from all sides, 215 x 160 mm Position display: Cartesian or polar, values absolute or incremental Unit: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram technology: yes Machining Cycles Standard software options: Conversational programming, 38 zero point shifts, rotation and mirroring, teach-in for X,Y,Z, program restart with selective re-entry Zero point determination: Cycles for zero point determination by manual probing of the workpiece for: - Freely mounted rectangular parts - Freely mounted round parts - Positioning of cast and flame-cut parts - Angle detection by probing reference edges/surfaces on round parts Test graphics: Graphical display of drilling patterns Data interfaces: USB