Mobilná drviaca linka

Doppstadt AK 565

Rok výroby: 2018, stav: nový, Permanentný nadpásový magnetický separátor Typ PEM2200 Ljdsd Dy S Djpfx Ab Eehd 2200 x 1000 x 400 mm ===== 4x krúžkové skrutky na zavesenie Gumený pás GB30 Rozmery magnetu: 1200 x 500 mm

Stav: použitý, Rok výroby: 2021, Lindner Urraco 95 DK – Year of manufacture 2021 – Well-maintained condition For sale is a Lindner Urraco 95 DK from the year 2021 with 7,230 recorded operating hours. The shredder is in well-maintained and ready-to-use condition. Please refer to the photos for the exact condition. The machine is equipped with the DK4 package, featuring a reinforced gearbox and a reinforced shredding frame. — Equipment / Scope of Delivery - 1 set of armoured shafts HW 8/10 with scrapers and breaker bar, suitable for scrap and waste Lhjdjx Nkhqjpfx Ab Eed - 1 set of used shafts HW 8/10 with scrapers and breaker bar, also suitable for scrap and waste - DK4 package with reinforced gearbox and reinforced shredding frame — Technical Data – Lindner Urraco 95 DK Model: Lindner Urraco 95 DK Year of manufacture: 2021 Operating hours: 7,230 Engine power: approx. 566 kW (approx. 770 HP) Emission standard: Stage V / Tier 4f (depending on configuration) Shaft length: approx. 2,500 mm Shaft diameter: approx. 870 mm Maximum torque: up to approx. 480,000 Nm Machine weight: approx. 46 t Dimensions (L x W x H): approx. 9.2 m x 2.55 m x 3.2 m Undercarriage: crawler tracks, hydraulically driven Fields of application: scrap, commercial waste, bulky waste, mixed waste, wood, recycling material — Condition: Well-maintained machine Technically fully operational Sale as inspected on site Additional information / Service history The machine has been under a full maintenance and service contract with Lindner up until recently. All maintenance and service work was carried out professionally according to the manufacturer's specifications and documented. Notes: • Sale is made excluding any warranty or guarantee. • No returns or renegotiations. • Subject to prior sale. All information is provided without guarantee. The seller assumes no liability for possible errors, incompleteness, or alterations to the details provided. Sale is made exclusively subject to prior sale.

Stav: veľmi dobrý (použitý), Rok výroby: 2015, prevádzkové hodiny: 2 000 h, Funkcionalita: plne funkčný, Type: DW 3060 Type D Year of manufacture: 07/2015 Location: Germany Operating hours: 1,950 h Available from: by arrangement Equipment: Diesel engine MTU R 1300 EUROMOT IV, 320 kW Total weight: approx. 25,000 kg Hydrostatic travel drive 18-channel radio remote control Rear conveyor 5.5 m, hydraulically foldable Comb extension Ljdpfxexrtt Es Ab Eehd Moistening device 21 roller teeth, type C, DoubleLock quick-change system 20 trapezoidal comb teeth Overband magnet Hopper extension Service details The machine is in very good technical and visual condition The machine will receive a brand-new planetary gear before delivery The machine will undergo a technical inspection and maintenance prior to delivery The machine is sold in the condition existing at the time of handover. The seller assumes no liability for defects. We reserve the right to prior sale, modifications, and repairs.

Stav: použitý, Rok výroby: 1977, Roller diameter: 320 mm Throat depth: 310 mm Workpiece height: 230 mm Table size: 505 x 505 mm Cutting speed: 12 - 375 m/min Speed (rpm): Saw band width: 2 mm Operating voltage: 400 V Total power requirement: 1.3 kW Machine weight: approx. 420 kg Required space: approx. 0.80 x 0.80 x 1.65 m - Factory no.: 22600-77/14 - Infinitely variable feed - IDEAL band welding unit - Grinding wheel Lhodpjvnv S Tofx Ab Eed - Machine lamp

Stav: generálne opravený (použitý), Rok výroby: 2011, Funkcionalita: plne funkčný, číslo stroja/vozidla: 12786 040, celková hmotnosť: 20 000 kg, priemer rotora: 640 mm, celková dĺžka: 4 900 mm, celková výška: 2 600 mm, celková šírka: 4 100 mm, šírka rotora: 2 000 mm, výkon: 203 kW (276,00 k), otáčky (max.): 340 ot./min, vstupný prúd: 415 A, Výbava: otáčky plynule nastaviteľné, Vecoplan VAZ 2000 M F-T je výkonný jednohriadeľový drvič. Tento robustný drvič ponúka efektívne a spoľahlivé riešenie pre rôzne oblasti použitia. Možnosti využitia: - komunálny odpad - plasty - papier Vďaka osvedčenej technológii a vysokej priepustnosti 4–5 ton za hodinu je VAZ 2000 M F-T ideálnou voľbou na drvenie a znižovanie objemu v procesoch zhodnocovania a recyklácie odpadu. Fotografie sú ilustračné. Fotografie nezobrazujú konkrétny ponúkaný stroj, slúžia len ako príklad, ako môže stroj po generálnom servise vyzerať. Cena na vyžiadanie. Lsdeurkc Rjpfx Ab Eohd

Stav: dobrý (použitý), Rok výroby: 2022, prevádzkové hodiny: 2 100 h, Funkcionalita: plne funkčný, Equipment: Base Package Inventhor Type 6 - Load-sensing system - 500-liter fuel tank - Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm - Centrally positioned wear strips - 24 V electric control – additional electric pump for activating the following functions when engine is off: "Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower foldable hopper" - Complete radio remote control - Large side GRP maintenance doors - Service-friendly engine compartment - LED lighting package: engine compartment and rear - Hydraulically reversible cooling fan - Three-sided loading protection - Folding hopper - Fire extinguisher - Maintenance ladder - Toolbox - Audible start-up warning - Doppstadt telematics system Lhodpjwnfwqsfx Ab Eed - Paintwork: RAL2011 deep orange Special Equipment: - Powertrain 310 kW – electric drive - 3-axle drawbar chassis unit - Shredding system Size L 600/4–30 Z - Auxiliary hydraulic connections 35–80 l/min - Hydraulic drive - Rear discharge conveyor 4.9 m - Overband magnet neodymium - Frame for overband magnet

Stav: veľmi dobrý (použitý), The system essentially consists of: - 2 feeding units (walking floor bunker) - 2 silos, each with 55 cbm capacity, equipped with discharge screws - 2 auger conveyors - 4 mixing and homogenization chambers - 5 transport conveyor belts Lhodpslxzl Eefx Ab Eed - 2 parallel twin-shaft extruders for the processing of woody biomass - 1 twin-shaft paddle mixer - Twin-shaft extruder for homogenization - Laboratory container with mixing and dosing system for liquid extracts

Stav: veľmi dobrý (použitý), Rok výroby: 2010, prevádzkové hodiny: 2 000 h, Funkcionalita: plne funkčný, číslo stroja/vozidla: 093, celková hmotnosť: 30 000 kg, prepravná šírka: 2 500 mm,

Stav: dobrý (použitý), Rok výroby: 2022, prevádzkové hodiny: 600 h, Funkcionalita: neoverené, Výbava: Základný balík Methor pásový bez drviaceho systému - Pásový podvozok vrátane 2 jazdných rýchlostí - Pás podvozku 400 mm, 3-hrebenný - Prídavný hydraulický výstup 70 l/min - 24 V elektrické ovládanie - Veľké kompletné diaľkové ovládanie - Motorový priestor s jednoduchou údržbou a LED osvetlením - Sklopný násypník s cestným senzorom a automatickým riadením - Hydraulicky reverzibilné ventilátorové koleso - Akustické varovanie pri spustení - Lakovanie: RAL 2011 tmavo oranžová Ljdpfxsvrz Rvj Ab Eohd Špeciálna výbava: Drviaci systém veľkosť L (8 zubov) Motor Cat C7.1, 205 kW Zadný pás 6,9 m Rám pre nadpásový magnet Nadpásový magnet Zavlažovací systém

Stav: použitý, Rok výroby: 2021, prevádzkové hodiny: 3 300 h, Funkcionalita: plne funkčný, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EC directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support legs Splash guards (inner and side fenders) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm complies with EUROMOT V emission standard Lhsdpfxexx Tige Ab Eod Auxiliary hydraulic connection 20 l/min Load-dependent control of material feed incl. automatic scraper floor reversal Separate drive of infeed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Infeed roller: length 1,690 mm, diameter 510 mm, with mounted tooth segments Four-row flail drum with 36 free-swinging cast-steel flail holders and replaceable flail tips Standard: "Streusel plus" flail tip Impact plate with teeth Centrally arranged wear strips Electric pump for operation of cylinder functions (e.g. raising/lowering support legs and opening/closing rear basket, folding/unfolding rear conveyor, disengaging drive) when engine is off 24 V electrical control system Separate control cabinet at the rear of the machine Hydraulically folding fine shredding basket Multimesh (mesh size between 30 - 280 mm, gradation on request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic center section Lower conveyor: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Wear protection in drum area Reinforcement plates at feed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt Telematic System Paintwork: RAL 2011 deep orange Optional equipment: Hydraulic drive Scraper floor chain lubrication NEODYM overbelt magnet Frame for overbelt magnet Central lubrication Engine compartment protection plate Lighting package: engine compartment and rear conveyor Irrigation Delivery date by arrangement Available from 06/2026