Nožnice na plech

EHT TSS 4-31

Stav: použitý, Rok výroby: 1985, Sheet width: 3100 mm Sheet thickness: 4.0 mm Sheet thickness for stainless steel: 2.5 mm Shear angle adjustment: 1.0° Backgauge - adjustable: 10 - 1000 mm Adjustment speed: 180 mm/s Hold-downs: 21 pcs Strokes per minute: 18 - 31 Oil capacity: 160 L Control unit: ELGO P8511 Throat depth: 200 mm Clearance between frames: 3050 mm Max. pressure: 300 bar Operating voltage: 400 V Main motor: 9.0 kW Ksdpsxab Tvefx Ac Nedk Machine weight approx.: 4800 kg Space requirements approx.: 3660 x 2070 x 2140 mm From a maintenance workshop Equipment: - Electro-hydraulic guillotine shear (oscillating cut) - Machine frame: all-steel welded construction - ELGO NC control unit, model P8511, control panel front left * For positioning of the electro-motorized backgauge * Target/actual position input possible * Adjustment via three-phase motor and toothed belt - Support table with ball rollers * Grip recesses located between table plates - Front finger guard - Hydraulically operated sheet hold-downs - 1x movable foot switch - Emergency stop button at the front - Movable scrap flap - Original operating manual and wiring diagram Special accessories included: - EHT pneumatic sheet support device for thin sheet cuts - 1x EHT extra long side stop 3,000 mm with mm scale & support leg - 1x EHT extra long support arm, 3,000 mm with scale & support leg - Additional EHT support arms with mm scale

Stav: dobrý (použitý), Rok výroby: 2003, In good technical condition and fully operational. Year of manufacture: 2003. X-axis: 350 mm. Y-axis: 250 mm. Z-axis: 256 mm. Workpiece length: 750 mm. Workpiece width: 550 mm. Workpiece height: 250 mm. Machine dimensions: L 1670 mm x W 2040 mm x H 2305 mm. Machine weight approx. 2,600 kg. Kodpfou Tq Hwex Ac Njdk

Rok výroby: 2004, stav: pripravené na použitie (použité), A fully automatic Kasto bandsaw system is available. Cutting capacity at 90°: round material: 530mm, square material: 530mm x 530mm, flat material: 530mm x 640mm. Saw blade length: 7,675mm, blade width: 54mm, blade thickness: 1.6mm, cutting speed: 120m/min. Overall system dimensions (L/W): approx. 18,000mm x 4,000mm. Weight: approx. 6,000kg. Includes roller conveyors. Documentation available. On-site inspection is possible. Kedpfov S E Edjx Ac Nsdk

Stav: nový, Rok výroby: 2025, Tlaková tryskacia kabína DSK 11.11.30. Rozmery tryskacieho priestoru: šírka 1050 mm, hĺbka 1050 mm, výška 955 mm. 1 TÜV-certifikovaná tlaková nádoba 30 l s kužeľovým výsypným lievikom. 1 dávkovací ventil tryskacieho média s pneumatickým riadením množstva média. 1 zabudovaný uzatvárací kužeľ s vodiacou trubicou. 1 prívod stlačeného vzduchu s pneumatickým uzatváracím ventilom a vetvou pre ovládací vzduch. 1 regulátor tlaku na nastavenie tryskacieho tlaku. 1 tryskacia hadica DN19. 1 pištoľ s borid-karbidovou Venturi tryskou 8 mm. 1 pár tryskacích rukavíc. Elektrické nastavenie výšky kabíny pre ergonomickú polohu pri práci. Pamäť na 3 výškové polohy. Odprášený filter 2000 m³/h 2,2 kW. Kdjdsga Ehbepfx Ac Nok

Stav: použitý, Rok výroby: 2009, Cutting diameter: 15 – 560 mm Cutting range at 90 degrees, flat: 560 x 630 mm Saw band dimensions: 7,400 x 54 x 1.60 mm Control: KASTO Material feed – single: 900 mm Multiple feed length max.: 9,999 mm Minimum cut length: 6.00 mm Saw motor: 5.50 kW Cutting speed: 13 – 127 m/min Material support height: 700 mm Total power requirement: 12.00 kW Kdjdjvxwkfjpfx Ac Nok Machine weight: approx. 6.00 t Space requirement: approx. 3.70 x 2.50 x H2.50 m Double-column automatic band saw with KASTO Compact Control; frequency-controlled saw band drive; minimum quantity lubrication; chip conveyor; 6 m powered infeed conveyor + 3x short roller conveyor 1 m; outfeed conveyor 2 m; machine available for inspection under power.

Stav: použitý, Rok výroby: 1970, číslo stroja/vozidla: 120895, Pressure: 63 t Kdsdpfxjfx Hv Hs Ac Njk Throat depth: 250 mm Stroke: 8 - 100 mm Strokes per minute: 120 spm Table size: 715 x 500 mm Installation height: 330 mm Ram adjustment: 63 mm Clamping plate: 700 x 480 mm Pass-through opening in the table: 240 mm Pass-through opening in clamping plate: 110 mm Ram mounting surface: 450 x 280 mm Machine weight approx.: 5.5 t Space requirement approx.: 1.2 x 1.7 x 2.7 m Single-column eccentric press with tiltable construction via hydraulic adjustment system, tiltable in 4 steps, pass-through opening to the rear (325 x 500 mm) and downward (360 x 160 mm), with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot release can be configured, mode selector switch for setting continuous or single stroke, emergency stop switch, piece counter, various accessories.

Stav: nový, Rok výroby: 2025, 2-roller powered section bending machine Hydraulically adjustable top roll Kdodpfxehgiuho Ac Njk Shaft diameter: 40 mm Roll diameter: 152-162 mm Rotations: 8.5 per minute Top roll adjustment: 120 mm Capacity chart: see attachment Machine available in various versions: Manual adjustment, 3-roll drive, etc.

Stav: nový, - Priemer hriadeľa 50 mm - Horný valec je poháňaný hydraulicky - Tri poháňané valce - Digitálny displej - Možnosť horizontálneho aj vertikálneho použitia - Nožný spínač - Núdzové zastavenie Kedpfx Acjgg N Tws Nodk - Dokumentácia - 400V

Rok výroby: 1993, stav: pripravené na použitie (použité), A total of six used injection moulding machines with various accessories from Arburg and Engel are available. 1) Engel ES80/35, year of manufacture: 1992, clamping force: 350 kN, injection pressure: 1500 bar, shot weight: 35 g/PS, screw diameter: 22 mm, centering hole: 110 mm, mold opening stroke: 330 mm, control unit: defective. 2) Arburg 305 ECO 700-230, year: 1989, clamping force: 700 kN, screw diameter: 40 mm, centering hole: 125 mm, min./max. mould height: 190 mm/420 mm, tie-bar spacing X/Y: 305 mm/135 mm, mold opening stroke: 250 mm, control unit: defective. 3) Arburg 305-210-700, year: 1982, clamping force: 700 kN, injection pressure: 1500 bar, shot weight: 117 g/PS, screw diameter: 35 mm, centering hole: 125 mm, min./max. mould height: 200 mm/400 mm, tie-bar spacing: 305 mm. 4) Arburg 221-75-350, year: 1992, clamping force: 350 kN, injection pressure: 1500 bar, screw diameter: 22 mm, centering hole: 110 mm, min./max. mould height: 150 mm/300 mm, tie-bar spacing: 221 mm. 5) Arburg 221-55-250, year: 1991, clamping force: 250 kN, shot weight: 32 g/PS, screw diameter: 20 mm, min./max. mould height: 150 mm/300 mm, tie-bar spacing: 320 mm. 6) 2K injection moulding machine Arburg 221-75-350, year: 1993, clamping force: 350 kN, injection pressure: 1500 bar, shot weight: 38 g/PS, screw diameter: 22 mm, min./max. mould height: 150 mm/300 mm, tie-bar spacing: 221 mm. Included: 7-8 Arburg dryers, various injection units, AirComp compressor, liquid silicone mixing unit with Arburg control and Scheugenpflug. Documentation available. Inspection on site possible. Kdjdpfxjvb Hbfe Ac Nsk

Stav: veľmi dobrý (použitý), Rok výroby: 2005, Mechanical guillotine shear Make: Petersen Machinery Model: Cidan HSM-F 20/3 Year: 2005 Technical Data Manufacturer: CIDAN Model: HSM-F 20/3 Sheet width: 2050 mm Sheet thickness: 3 mm Cutting angle: 2° Connection: 400V / 20A Dimensions: approx. L 2.60 x W 1.60 x H 1.40 m Weight: approx. 1.5 t Features • Manual backgauge 750 mm • Continuous hold-down with hard rubber insert • Angle stop • Extendable support table Kodju Utaiepfx Ac Nodk All information subject to change. A demonstration is possible at any time in our showroom.