Upínacia doska, upínací stôl, obrábaný oceľový strojový stôl, ťažká rovnacia alebo zváracia doska

EIGENBAU 2150 x 1040

Stav: nový, Cutting range at 90 degrees: round 350 mm Cutting range at 90 degrees: square 330 mm Cutting range at 90 degrees: rectangular 500 x 310 mm Blade speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total connected load: 2.2 kW Machine weight approx. 1.2 t Space requirement approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-Column double mitre band saw K-tech DG 50/33 HA-I • 2-Column mitre saw • Solid yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation thanks to angled cuts, feed regulator + cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for cleaning/disinfection) • Energy-efficient and low-vibration due to angled cuts Dodpfxefg E Hlj Af Dsup • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 - 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vise • LEDs to monitor all safety functions • Oversized drive wheels (520 mm) each • Clear mitre adjustment up to 60° Semi-automatic function: 1. Clamp material 2. Start saw 3. Rapid-feed lowering to material start or for batch cutting, direct cut 4. Saw blade off 5. Raise frame just above material 6. Open vise

Stav: dobrý (použitý), Rok výroby: 1997, Funkcionalita: plne funkčný, vŕtacia kapacita: 40 mm, ťah perom: 200 mm, priemer pinoly: 80 mm, Machine Version • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots, 18 mm, at the rear of the machine base • 2 T-slots, 18 mm, on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 T-slot spacing mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – min mm 70 Table top max. mm 680 Distance spindle nose – min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 Duedpsrmkfnsfx Af Djp GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Infinitely variable feeds mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axes over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat panel, backlit, easily readable from all sides, 215 x 160 mm Position display: Cartesian or polar, values absolute or incremental Unit: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram technology: yes Machining Cycles Standard software options: Conversational programming, 38 zero point shifts, rotation and mirroring, teach-in for X,Y,Z, program restart with selective re-entry Zero point determination: Cycles for zero point determination by manual probing of the workpiece for: - Freely mounted rectangular parts - Freely mounted round parts - Positioning of cast and flame-cut parts - Angle detection by probing reference edges/surfaces on round parts Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stav: nový, Rok výroby: 2022, ŠPECIÁLNA CENA, skladový stroj rok výroby 2022, stav: nový Cenníková cena: 14 110 € SKLADOVÝ STROJ – Poloautomatická pásová píla na kov s vysokou presnosťou rezu! S týmto strojom sú bezstupňovo možné uhlové rezy doľava do 45° a doprava do 30° (rozsah natáčania vľavo 45° a vpravo 60°) Technické údaje ● Rozsah rezu - 90° kruh: 280 mm / štvorcový: 240 mm / obdĺžnik: 420 x 200 mm - 45° vpravo kruh: 260 mm / štvorcový: 240 mm / obdĺžnik: 260 x 200 mm - 30° vpravo kruh: 170 mm / štvorcový: 160 mm / obdĺžnik: 160 x 160 mm Dusdsmf T Hpopfx Af Dop - 45° vľavo kruh: 200 mm / štvorcový: 180 mm / obdĺžnik: 250 x 100 mm ● Výkon pohonu: 0,9–1,5 kW / 400 V / 50 Hz ● Rýchlosť pásu: 35 / 70 m/min ● Rozmer pílového pásu: 3270 x 27 x 0,9 mm Základná výbava: ● Hydraulické ovládanie rámu píly ● Automatické obmedzenie výšky rámu píly prostredníctvom kontaktného snímača ● Ľahké a pohodlné upínanie materiálu pomocou hydraulického krátkozdvihového valca ● Hydraulická regulácia tlaku rezu ● Jednoduché plynulé nastavenie píly pre uhlové rezy ● Elektronické monitorovanie napnutia pásu s kontrolou prerušenia pílového pásu

Stav: dobrý (použitý), Rok výroby: 1994, Funkcionalita: plne funkčný, dĺžka posuvu os X: 500 mm, dĺžka posuvu osi Y: 430 mm, dĺžka posuvu osi Z: 400 mm, maximálna rýchlosť vretena: 3 550 ot./min, otáčky vretena (min.): 17 ot./min, For sale is a Hermle UWF 802 M CNC / Conventional Milling Machine Dsdpfjrvitlex Af Djup The machine is in good to very good condition and ready for immediate use. Technical Data: Year of manufacture: 1994 Control system: Heidenhain TNC 124 Clamping table: Fixed angle table Spindle speed: 17 to 3550 rpm Feed rate: Infinitely variable Drive power: 6 kW Travel X: 500 mm Travel Y: 430 mm Travel Z: 400 mm Tool holder: SK40 Dimensions (L*W*H): 1800*1800*1900 mm Weight: 1.8 t Loading and transport (Europe-wide) can be organized upon request and for an additional charge. Prices are subject to VAT. Inspection possible by appointment. Please contact us – our team looks forward to assisting you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Rok výroby: 2022, stav: nový, Nový šroubový kompresor CECCATO 11 kW 2022 Šroubový kompresor NOVÝ!!! CECCATO CSA15/10 G2 (šroubový stupeň ATLAS COPCO). Technické údaje: Duedpoiphyaofx Af Dop Výkon: 1,40 m3/min; motor o výkonu 11 kW; tlak 10 bar rok výroby: 2022 provozní hodiny: 0!!! Kompresor je plně funkční, nový!! Zajišťujeme servis

Stav: nový, Poloautomatická horizontálna pásová píla Fastech BMSY 320 DGH Rozmery pílového pásu: 4160x34x1,1 mm Plynulo nastaviteľná rýchlosť pásu: 20 – 100 m/min Maximálny prierez pri 0° (pravouhlo): obdĺžnik 450x320 mm, kruh 320 mm Maximálny prierez pri 30°: kruh 320 mm, štvorec 320 mm, obdĺžnik 410x320 mm Maximálny prierez pri 45°: kruh 320 mm, štvorec 320 mm, obdĺžnik 330x320 mm Maximálny prierez pri -30°: kruh 320 mm, štvorec 320 mm, obdĺžnik 420x320 mm Maximálny prierez pri -45°: kruh 320 mm, štvorec 320 mm, obdĺžnik 340x320 mm Maximálny prierez pri -60°: kruh 240 mm, štvorec 220 mm, obdĺžnik 230x220 mm Pracovná výška: 860 mm Výkon motora chladiaceho čerpadla: 0,12 kW Výkon hydraulického motora: 0,37 kW Výkon hlavného motora: 2,2 kW Dĺžka: 2260 mm Šírka: 1160 mm Výška: 1700 mm Hmotnosť: 1030 kg Obojstranná pokosová píla Dsdpfx Afjg Ekp Ne Deup Plynulo nastaviteľná rýchlosť pásu Hydraulické upínanie obrobku Vysokovýkonná prevodovka Hydromechanické napínanie pílového pásu Kefka na čistenie pásu Digitálny ukazovateľ uhla pokosu

Stav: nový, Rok výroby: 2025, vŕtacia kapacita: 40 mm, hĺbka hrdla: 1 220 mm, otáčky vretena (min.): 110 ot./min, maximálna rýchlosť vretena: 2 900 ot./min, celková hmotnosť: 1 710 kg, zdvih vretena: 200 mm, držiak vretena: MK 4, Drilling capacity in St 60: 40 mm Drilling capacity in GG 20: 40 mm Thread cutting (St 60 / GG 20): M 27 / M 36 Tool holder, short spindle: Morse taper 4 (MK 4) Spindle-to-column clearance, min. - max. (centre spindle/column): approx. 210 - 1220 mm Clamping surface, machine table: approx. 1200 x 510 mm T-slots in machine table (number x width): 3 x 18 mm Distance spindle to table, min. - max.: approx. 375 - 675 mm Distance spindle to base plate (option), min. - max.: approx. 1075 – 1375 mm Spindle stroke: approx. 200 mm Feeds (4 steps): 0.08 / 0.1 / 0.2 / 0.3 mm/rev Duodpfx Aotzkmbjf Dsp Main spindle speed range, stepless: 110 - 2900 rpm Dimensions (height x width x depth): approx. 2500 x 1200 x 1710 mm Net weight: approx. 1710 kg Main spindle drive motor power, 400 V, 50 Hz: approx. 2.2 / 4.0 kW

Stav: veľmi dobrý (použitý), Rok výroby: 1998, Funkcionalita: plne funkčný, číslo stroja/vozidla: 4397, Dear Sir or Madam, For sale is a Weiler Praktikant 160 AC lathe, year of manufacture 1998, equipped with the original Weiler 3-axis digital readout. This newer "AC" variant particularly stands out thanks to its infinitely variable speed control, which makes working on this already user-friendly machine even easier. The machine has been extensively partially overhauled in our workshop, so it is in excellent technical and visual condition. All guides are in good condition, the gearboxes run quietly and the levers shift smoothly. You are welcome to visit us and see the machine’s condition for yourself. Availability: on request Machine No.: 4397 Year of manufacture: 1998 Centre height: 160mm Centre distance: 650mm Spindle bore: Ø 40mm Spindle speed: 20–3000 rpm, stepless Duodpjq H D U Eofx Af Dep Tailstock taper: MT3 Quill travel: 85mm Longitudinal feed range: 0.020 – 0.630 mm/rev Cross slide feed range: 0.006 – 0.200 mm/rev Thread cutting types: Metric, Imperial, Module, Diametral Pitch Metric thread pitches: 0.25 – 8mm Spindle brake: switchable Total power requirement: 7.5 kVA Voltage: 400V Dimensions: approx. 1.58 x 0.9 x 1.5 m (LxHxW) Weight: approx. 720 kg Further equipment and accessories: 3-axis DRO, coolant system, chuck guard, jaw chuck, and additional accessories on request… Our service promise to you: - We are a certified master workshop in the field of mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced in advance - If requested, we can fully or partially overhaul your selected machine - If requested, we can repaint your chosen machine in your desired colour - If requested, you can order additional accessories such as tools directly - If requested, we can mount further accessories such as safety devices - We are happy to take care of shipping and/or installation for you

Stav: veľmi dobrý (použitý), Rok výroby: 2008, Funkcionalita: plne funkčný, Universal Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 CNC Control – excellent CONDITION, CE-compliant! Technical Data: >> Year of manufacture: 2008 >> Machine No.: 348084 >> Rigid angle table >> Spindle speed: infinitely variable up to 4,500 rpm >> Infinitely variable feed in 3 axes from 0 to 2,000 mm/min >> Rapid traverse X & Y axis: 5,000 mm/min Z axis: 4,000 mm/min >> Travel X/Y/Z: 400/350/400 mm >> Table size: 650 x 350 mm >> Table load: 250 kg >> Vertical quill travel: 60 mm >> Vertical and horizontal quill – SK40 >> Hydraulic drawbar system >> Weight approx. 1,800 kg >> Space requirements approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories and Equipment: Dodpfsv Dut Ijx Af Dsup >> Heidenhain TNC 320 CNC control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare part diagrams, operator manual for the control and programming examples >> Hand wheels >> Coolant system >> Electronic handwheel HR410 About the machine: For sale is a Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 320 CNC control. This universal milling machine is in very good condition. It comes from a facility where it was only used occasionally for training purposes. The control is very easy to operate. Additionally, the machine features hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal operation is simple due to the fold-away vertical head. The guides are regularly lubricated via the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to visit and test the Kunzmann under power on site.

Stav: použitý, Univ. NC Milling Machine KUNZMANN Type WF 3/4 Machine No. 341020 Year of manufacture: 1998 Travels X: 400 mm Y: 320 mm Z: 400 mm Table size: 650 x 350 mm Spindle taper: SK 40 Spindle speed: 40 - 2500 rpm Feeds X, Y and Z axes: 0 - 1000 mm/min infinitely variable Rapid traverse X, Y axes: 4000 mm/min Rapid traverse Z axis: 3000 mm/min Quill stroke vertical: 60 mm Spindle motor power: 3 kW Power supply: 400 Volt, 50 Hz Duedpfxolvyrbe Af Dep - CNC path control Heidenhain TNC 124 - Spindle speed via 2 gearbox stages and infinitely variable via electronically controlled variator gearbox - Vertical milling head swivels +/- 90° - Hydraulic tool clamping - Fixed angular table - Control cabinet mounted to the machine - Coolant tank with pump adjacent - Central lubrication - Lighting Space requirements (L x W x H): 1800 x 1800 x 1900 mm Weight: 1300 kg In good condition