Brúska na povrch s otočným stolom

ELB-SCHLIFF ROTARY 50 SPS-NK

Stav: veľmi dobrý (použitý), Rok výroby: 1990, Funkcionalita: plne funkčný, celková hmotnosť: 2 500 kg, Stroj je možné otestovať pod prúdom. Kfsdpfow Idwzox Ac Hoa

Stav: použitý, Rok výroby: 1998, Hon bore diameter 90 mm Stroke 490 mm Throat 400 mm Total power requirement 10 kW Machine weight approx. 3,500 kg Space requirements approx. ? m Kfedpfx Ast Hw T Ssc Hsa KADIA Vertical honing machine Model: VZH 90/450 F Year of manufacture: 1998 Serial no.: 50/1790 _____ Max. honing diameter: 10 - 90 mm Max. honing depth: 30 - 450 mm Max. spindle stroke: 490 mm Spindle throat: 400 mm Installation height under spindle nose (top): approx. 1,200 mm Table size approx.: 400 x 600 mm Max. workpiece diameter approx.: 700 mm Spindle speed, infinitely variable: 160 – 830 rpm Stroke speed, infinitely variable: 25 mm/min Spindle drive: 4.5 kW Total drive: 10 kW – 400 V – 50 Hz Weight approx.: 3,500 kg Total machine height approx.: 4,000 / 3,300 mm Accessories / Special Equipment • Machine equipped with SIEMENS S5 / Unipos 4.0 PLC control for entry of all essential honing parameters such as tool speed, stroke length, expansion, honing time, error messages, etc. • With fixed table 600 x 400 mm • Automatic shutoff after a presettable time with subsequent spindle retraction • Automatic motorized tool expansion via el.-mech. feed head ESZ 90/1 D • Separate hydraulics, central lubrication, workpiece clamping device on table • Currently no suitable coolant unit, no honing tools. Condition: Good to very good – ready for demonstration Delivery: Ex stock – as inspected here Payment: Net – upon receipt of invoice

Stav: nový, Rok výroby: 2019, číslo stroja/vozidla: DF0303, Pressure: 160 t Clear opening: 700 mm Stroke: 400 mm Return force: 16 t Motor power: 15 kW Stroke travel: 400 mm Ram plate: 700 x 600 mm Table height above floor: 850 mm Table plate: 700 x 600 mm Approach speed: 10 mm/sec Pressing speed: 10 mm/sec Rapid traverse speed: 10 mm/sec Oil cooling (electric): 1.5 kW (max) Oil tank: 300 l Machine weight approx.: 4.2 t Dimensions L x W x H: 950 x 2440 x 2400 mm Ejector: 30 x 30 mm Ejector stroke: 150 mm Ksdpfx Aofxyh Roc Hsfa Ejector force: 15 t Ejector speed: 25 mm/sec Number of ejector pins: 1 piece Heating plates (L x W): 550 x 500 mm Light barriers front and rear: 6800 Rear double doors monitored: 2400 Right side door monitored: 1200 Left side door monitored: 1200 The heating plates measure 550 x 500 mm, are electrically heated up to 200°C, and are insulated from the machine body. The heating plates are equipped with 12 mm T-slots in accordance with DIN 650, slot design per customer specification. Each plate features 2 temperature sensors to ensure heating accuracy of ±3°C within a 500 x 450 mm area. Pressing force is adjustable in 10 steps via rotary controller. Return speed is 25 mm/sec. The two-hand operation is mounted on the machine body and can be rotated and swiveled. Interior lighting. Heating time and desired temperature are freely adjustable. Heating capacity approx. 12 kW. The upper and lower heating plates can be set independently. When the heating time ends, a signal sounds and the press opens automatically if desired. The heating plates are supplied by the German manufacturer ELKOM.

Stav: pripravené na použitie (použité), Rok výroby: 1995, Funkcionalita: plne funkčný, číslo stroja/vozidla: 4304, priemer otočného stola: 600 mm, brúsna výška: 450 mm, celková hmotnosť: 14 500 kg, Stroj je vybavený 3 vretenami na čelné brúsenie, vonkajšie brúsenie a brúsenie otvorov. Revolverová hlava s osou B s delením po 1°. Pásový filtračný systém je súčasťou dodávky. Kfsdpfx Ajvt A Rtoc Hoa

Stav: použitý, Rok výroby: 2000, Workpiece diameter - max. 40 mm Workpiece diameter - min. 10 mm Workpiece length: 200 – 640 mm Control: Siemens S5 95 U PLC Total power requirement: 25 kW Machine weight approx. 5 t Space requirement approx. 8.5 x 2.8 x 2.35 m Hydraulic cutoff and double-end processing machine suitable for the pre-processing of trapezoidal-thread spindles and other round workpieces. Operations include bar cutting and simultaneous end machining such as chamfering, face milling/counterboring, and drilling, with stationary workpieces and rotating tools. Machine configuration: - Base machine: Model TR 60/4-650, max. workpiece length 640 mm - Bar magazine for bar lengths 2 – 3.5 m - Standard execution for solid bars up to 40 mm diameter - Central positioning of bar feed rollers - Bar feeder unit - Feed gripper, standard execution - Indexing table with 4 clamping stations, Model TR 300.00 - 4 base jaws, 80/140 mm width, 75 mm diameter - Indexing table pivots in both directions - Saw unit with worm drive TR 200.00, 100 mm stroke - Saw blade 350 mm, speeds 25/39 rpm - Motor power 2.6/3.2 kW - Motorized saw head positioning - Automatic saw stand positioning with hydraulic clamping - Saw blade guide - Machining unit no. 1 – USP.00/M - Speeds 842/1684 rpm, 3.3/4.0 kW - Working stroke 80 mm - Rapid traverse 40 mm - Spindle mount ISA 40/M16 - Toothed belt drive - Machining unit no. 2 – USP.00/M – UF - Speeds 360/720 rpm, 1.8/2.8 kW - Working stroke 80 mm - Rapid traverse 40 mm - Spindle mount ISA 40/M16 - Toothed belt drive - Thread cutting device for right- and left-hand threads Kodpfxevp Sd Is Ac Hofa - Machining unit no. 3 – USP.00/M - Speeds 842/1684 rpm, 3.3/4.0 kW - Working stroke 80 mm - Rapid traverse 40 mm - Spindle mount ISA 40/M16 - Toothed belt drive - Machining unit no. 4 – USP.00/M - Speeds 943/1882 rpm, 3.3/4.0 kW - Working stroke 80 mm - Rapid traverse 40 mm - Spindle mount ISA 40/M16 - Discharge chute - Millimeter rulers for all adjustment movements - Hydraulic unit with SAUER SUNDSTRAND feed pump - Accumulator - Rexroth flow regulator for machining units and saw - Coolant system with filter and tank - CALPERA coolant pump - Electrical system in separate control cabinet, control voltage 24V/50Hz - Siemens S5 95 U PLC - Machine lighting - Flashing light for machine stop signaling - Central lubrication - Chip conveyor In 2011, an extensive mechanical overhaul was carried out to optimize positioning and centering accuracy at a cost of €25,000. In addition, switches, some cables, ball bearings, seals, hydraulic hoses, etc. were replaced. The machine has hardly been used in recent years; the seller estimates total operating hours at approx. 24,000. This is a used machine; therefore, it is sold with exclusion of any warranty. STOCKING DEALER WITH 1,600 m² SHOWROOM.

Stav: pripravené na použitie (použité), Rok výroby: 2008, Funkcionalita: plne funkčný, číslo stroja/vozidla: 30013012, 27.10 25 : Stroj beží v sériovej výrobe. Plánované vypnutie v polovici roku 2026. Prosíme, uveďte Vašu ponukovú cenu. Predaj iba v rámci Európy, vrátane Turecka ----- Technické údaje viď prílohu. Bez balenia; Akékoľvek právo na záruku je vylúčené. Ak chcete stroj demontovať sami, informujte nás o tom vo Vašej ponuke. Za správnosť technických údajov, za úplnosť príslušenstva a nástrojového vybavenia, Kodpfx Acoth Sc Ho Hefa ako aj za dodržanie všetkých bezpečnostných a environmentálnych požiadaviek uvedených v predpisoch na predchádzanie úrazom, nepreberáme žiadnu zodpovednosť.

Stav: takmer ako nový (použitý), Rok výroby: 2018, Funkcionalita: plne funkčný, Použitý CNC lapovací stroj Výrobca: MELCHIORRE S.r.l. Model: ELC Typ: 1500 Kodpfx Acsxg Ncxs Hofa Rok výroby: 2018 Sériové číslo: 2780/08 Hmotnosť: 14 000 kg

Stav: použitý, Rok výroby: 2006, Grinding length: 800 mm Grinding width: mm Workpiece height: 400 mm Control system: Total power requirement: 60 kW Machine weight approx.: 17 t Space requirement approx.: m O F F E R We can offer you from stock, errors and prior sale excepted, without obligation: LODI CNC Vertical Double Rotary Table Surface Grinding Machine Type: RVP 800 2TG CNC Year of manufacture: 2006 #2093 _____ Grinding diameter: 800 mm Magnetic rotary table – diameter each: 800 mm Table speeds: 3–50 rpm Working height under grinding head max.: 400 mm Max. table load approx.: kg Segmented grinding head Ø: 640 mm Segment dimensions: 80 x 25 x 150 mm Grinding spindle speed: rpm Grinding spindle drive: 36 kW Total power: approx. 60 kW - 380 V – 50 Hz Weight: approx. 17,000 kg Accessories / Special equipment • LODI CNC Control T 2010 for (Z) grinding head feed, (Y) grinding head positioning left–right, table traverse, (X) dressing amount and speed, (W, V) positioning measurement control, (A, B) rotary table rotation. Simple input of all key cycle parameters, pre-programmed automatic cycles, additional program editor, program management, tool management, jog mode, etc. • With integrated electronic handwheel • MARPOSS Measuring Control P7ME for continuous measurement of workpiece height during grinding and automatic shut-off on reaching the final dimension. The measuring probe position can be set individually for both rotary tables via the CNC. • MARPOSS acoustic emission touch sensor for preventing 'air grinding'. (The acoustic emission is transmitted via the respective rotary table by a water jet.) • CNC-controlled grinding wheel dressing unit mounted under the segment head, with automatic compensation of the dressing amount. Simple parameter entry via the CNC in a pre-programmed dressing cycle. • 2 x round magnets Ø 800 mm with fine radial pole pitch and electric holding force regulation • Hydraulic weight compensation for the grinding head. • Separate control cabinet and electrical cabinet, complete enclosure of the working area with oil mist extraction • Sophisticated belt filter coolant filtration system with magnetic separator and coolant chiller unit. Condition: Very good condition! Please click here for a video of the machine: Delivery: Ex stock, immediately available, FCA Metzingen Payment: strictly net - upon receipt of invoice Kodpfx Acevkiute Hsfa We look forward to your order. Various rotary table internal, external, and surface grinding machines are always in stock – please feel free to inquire at any time.

Stav: použitý, Rok výroby: 2007, Tlak 20 - 300 kN Posuv valcovacieho vozíka 50 mm Priemer valcovacej vretena 120 mm Výška valcovacej vretena nad lôžkom stroja 200 mm Ovládanie SIN 840 D Upínacia dĺžka valcovacej vretena 200 mm Otáčky valcovacej vretena 0 - 50 ot/min Krútiaci moment na valcovaciu vretenu 2700 Nm Výkon pohonu 2 x 8,4 kW Vzdialenosť medzi valcovacími vretenami min. 271 / max. 368 mm Max. vonkajší priemer valcovacieho nástroja 300 mm Celkový príkon 26 kW Hmotnosť stroja cca 7,1 t Rozmery cca 9,70 x 4,50 x 3,80 m Kedpfsw E Nmkex Ac Hsfa CNC stroj na valcovanie ozubených kolies / závitov Proces valcovania hydraulický Felsomat vážiaca bunka Kompletné odsadenie

Stav: veľmi dobrý (použitý), Rok výroby: 2012, číslo stroja/vozidla: 1000-4.15.12, Läppiaci stroj ELP 1000/4 SN 1000-4.15.12 Rok výroby: 2012 Vonkajší priemer pracovného kotúča: 1020 mm Vonkajší priemer nivelačného prstenca: 368 mm Počet pracovných staníc: 4 ks Počet otáčok lapovacieho kotúča: 80 ot./min Plynulá regulácia otáčok: 0-80 ot./min Výkon pohonu: 4 kW Kfodpfxox Eznys Ac Hoa Napätie: 400 V Riadiace napätie: 24 V DC Ovládanie: Simatic S7 Rozmery (dĺžka x šírka x výška): 1925 mm x 1400 mm x 2011 mm Hladina hluku: 70 dBA Plynulo regulovateľné čerpadlo lapovacej suspenzie: CA4, SB-3V Ponorné čerpadlo: TB25/220 2700 ot./min Nádrž na brúsivá a leštidlá: 15 l Spotreba chladiacej vody: Uzatvorený okruh