Stredový sústruh

ELMAG INDUSTRIE 1000/230 HD

ELMAG INDUSTRIE 1000/230 HD universal lead and feed screw lathe 88173

Including RÖHM chuck
Including 3-axis position display
Including quick-change tool post 'Set', Multifix system
Ready for operation: Including oil fill, de-preserved (degreased), fully assembled, and test run performed

Heavy-duty lead and feed screw lathes, 5,500 watts:
The quality of the INDUSTRIE 230 HD models becomes apparent the moment you switch them on: Barely audible drive noise. No vibrations even at high cutting depths. In fact, with weights of 2,635, 2,835, and 3,055 kg, the 230 HD models are the heaviest in their class and, thanks to their extremely robust construction—e.g., high-frequency hardened V-guides—are ideal for heavy-duty and continuous operation.

The 230 HD offers an extra-large spindle bore of 80 mm for machining bar stock up to 2 1/2 inches (76.1 mm) in diameter. With a swing over cross-slide of Ø 290 x 1,000, 1,500, or 2,000 mm, and a maximum turning diameter of 460 or 700 mm, the machine meets nearly every requirement in mechanical engineering, steel fabrication, plant construction, and toolmaking. There are also 12 spindle speeds for 170 longitudinal and cross feeds as well as 150 leadscrew pitches for metric and imperial threads.

Standard equipment:
- Including digital position display
- RÖHM three-jaw chuck Ø 250 mm
- Four-jaw faceplate chuck Ø 315 mm
- Faceplate Ø 350 mm
- 2 fixed center points
- Live center MT 5
- Travelling steady
- Fixed steady
- 5-piece quick-change tool post set, MB
- Thread dial indicator
- Halogen machine lamp
- Emergency stop / No-volt release
- Chuck guard with safety switch
- Machine base / Chip tray / Splash guard
- Tool kit / Operating manual / CE certification

Optional accessories:
- Indexable insert turning tool set 25 x 25 mm, 7 pcs
- 7-piece insert set for turning tool set 25 x 25 mm
- 'Camlock' turning tool set 25 x 25 mm, 7 pcs
- Cut-off tool holder 25 x 25 mm, length 150 mm
- Cut-off blades for tool holder 25 x 25 mm

ADVANTAGES:
- 'CE' conforming machine with highest safety and machining accuracy according to DIN
Podetw Dxkspfx Afpord
- Powerful and robust for commercial & industrial use
- Coolant tank and pump integrated in machine base

TECHNICAL DATA:
Centre distance 1000 mm
Centre height 230 mm
Swing over bed 460 mm
Swing over cross-slide 290 mm
Swing without gap bridge 700 mm
Bed width 340 mm
Gap bridge length 200 mm
Cross slide travel 280 mm
Top slide travel 100 mm
Max. tool cross-section 25x25 mm
Chuck mounting D1 - 8
Spindle taper MT 7 mm
Spindle bore 80 mm
Spindle speed range 25 - 1800 rpm
Number of spindle speeds 12
Longitudinal feeds (170) 0.04 - 2.46 mm/rev
Cross feeds (170) 0.02 - 1.23 mm/rev
Metric thread pitches (24) 0.5 - 20 mm
Metric module thread pitches (20) 0.25 - 10 mm
Inch threads, TPI (61) 1-5/8 - 72 TPI
Inch module threads, TPI (45) 3-1/4 - 96 TPI
Leadscrew pitch 6 mm
Leadscrew diameter 40 mm
Tailstock taper MT 5
Tailstock quill diameter 75 mm
Tailstock quill travel 130 mm
Motor power 5500 W
Coolant pump 40 W
Power supply 400/50 V/Hz
Total length 2310 mm
Total height 1255 mm
Weight 2635 kg

Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.