Stredisko na opracovanie tyčí

Elumatec SBZ 150

elumatec SBZ150 Bar Processing Center 6.0m

5-axis control. Efficient machining of aluminum and steel profiles
Working length: 6,000 mm

Description:
Short tool change times; automatic tool changer for eight standard tools and three special tools (saw blade, special milling cutter diameter 50 mm, angle head or special milling cutter diameter max. 100 mm); six-sided machining; from below with angle head (option);
Rapid basic positioning (up to 60 m/min) of the machining unit on the X-axis; low-wear direct drive; with automatic clamp detection and positioning;
Two-circuit clamping system with two pneumatically swiveling stops; equipped with automatic central lubricating system as standard;
Rigid machine bed for 6,000 mm working length;
Continuous support table;
Clamping system with integrated six-row circulating roller units and linear guides.
5-axis industrial PC control, comprising:
3 axes with path control; high-dynamic three-phase servo drives with resolver and digital servo controller; swivel angles of A and C axes freely programmable;
With color monitor and floppy disk drive;
Storage capacity of over 200,000 programs;
3 serial and 1 parallel interface for online connection; barcode scanner, label printer, etc.
Integrated network card 10/100 MBit, RJ45 connection (network connection to be made by the customer's administrator)
Analog modem (customer must provide an analog telephone line)

Technical data:
Travel range X-axis: max. 6,240 mm
Max. travel speed 60 m/min.
Travel range Y-axis: 1,000 mm
Iaodpfx Agjw A Rv Is Neu
Max. travel speed 30 m/min
Travel range Z-axis: 635 mm
Max. travel speed 30 m/min.
Swivel angle A-axis: 0-90° freely programmable
Swivel angle C-axis: 0-355° freely programmable
Further information on milling area see drawing no. 150 05 17 08
Max. processing length for end-face machining left+right: 6,000 mm (with tool length 150 mm)
Positioning accuracy:
X-axis +/- 0.1 mm / per meter length
Y-axis +/- 0.1 mm
Z-axis +/- 0.1 mm

Milling spindle:
Speed [rpm]: up to 100-22,000
Power [kW]: 15
Tool holder: HSK-F 63
Max. cutter diameter: 100 mm
Saw blade diameter: 400 mm
Max. tool length: 150 mm from cone reference size.

Scope of delivery:
Automatic tool changer (without tool holders);
Two-circuit clamping system with 2 pneumatically swiveling material stops;
Automatic clamp detection and positioning;
8 horizontal pneumatic material clamping devices;
Tool setting gauge
Front light barrier
Saw blade DM400 with holder
Angle milling head

Important:
The bar processing center is equipped as standard with front light barriers.
Side and rear safeguarding, if required, must be provided by the customer or please ask for our offer for safety fences.

Incl.
Angle milling head for machining from below

Inzerát bol automaticky preložený. Chyby v preklade sú možné.