Hrotový sústruh

Emco EMCOMAT-17 D

Stav: nový, Machine according to DIN 8605: Lathe with increased precision. Centre distance: 700 mm Centre height: 170 mm Swing diameter over bed: Ø 340 mm Swing diameter over cross slide: Ø 190 mm Bed width: 260 mm Longitudinal slide travel: 600 mm Cross slide travel: 220 mm Lhodpfx Ajdctnbogbjd Top slide travel: 110 mm Cross slide length: 410 mm Cross slide width: 150 mm Bed carriage guide length: 380 mm Tool shank size: 20x20 mm Distance from spindle center to top slide: 34 mm Top slide (compound rest) swivel range: 60/120° Main spindle: Spindle mount DIN 55029 (Camlock): S 5 Spindle bore: Ø 50 mm Internal taper as per DIN 7178: 1:22 Spindle diameter at front bearing: Ø 70 mm Max. chuck diameter: Ø 200 mm Max. faceplate diameter: Ø 200 mm Spindle speeds: 40–3000 rpm Speed control: Stepless Mechanical speed ranges: 4 Main drive: Power at 40% duty cycle: 5.3 kW Max. nominal torque at main spindle: 640 Nm Feeds: 20 (28) longitudinal feeds Z: 0.045–0.787 mm/rev 20 (28) cross feeds X: 0.023–0.406 mm/rev Thread cutting: 20 (28) metric threads (standard equipment): 0.4 – 7.0 mm 32 inch threads (with optional gear set D3Z200): 56 – 4 TPI 28 module threads (with optional gear set D3Z200): 0.2 – 3.5 32 DP threads (with optional gear set D3Z200): 112 – 8 Tailstock: Quill diameter: Ø 50 mm Quill taper: Morse Taper 3 (MT3) Quill stroke: 120 mm Lateral adjustment: ± 13 mm Permissible workpiece weights Between centers: 50 kg Supported by tailstock: 150 kg Additional standard equipment: Including machine base and integrated 3-axis digital readout, German language, with color display 1 longitudinal stop 1 dead center, taper 1:22, DIN 7178 1 dead center MT3 1 tommy bar 1 drive plate segment 1 grease gun 3 hexagon bolts M16x60 – DIN 933 3 hexagon nuts M16-8 DIN 934 1 single tool holder 1 wrench A13x17 DIN 837 1 open-ended spanner SW 19 1 open-ended spanner SW 22 1 hex key SW 5 1 hex key SW 6 1 hex key SW 8 3 shear pins 1 electrical cabinet key 1 operating manual incl. spare parts list 1 electrical documentation 1 test certificate Packaging (for truck transport with pallet and plastic cover) Machine according to CE Attention: Images may depict special equipment/accessories!

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Emcomat 17D lead and feed screw lathe with 3-axis digital readout by K&C, like new from training workshop, excellent condition!!! Technical Data: Lhsdpfxswvuf To Agbsd >> Year of manufacture approx. 2000, Machine No. D3F H1 010 >> Centre height: 170 mm >> Swing over bed: 340 mm >> Swing over cross slide: 190 mm >> Turning length: 700 mm >> Spindle speed: 4 ranges, infinitely variable from 35–3000 rpm >> Quill travel: 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 / 0.787 mm/rev >> 20 cross feeds: 0.023 / 0.406 mm/rev >> Required floor space (L x D x H): approx. 1.6 x 0.9 x 1.3 m >> Weight: approx. 730 kg Accessories and equipment: >> 3-axis digital readout by K&C, brand new, 12-month manufacturer's warranty inc. user manual Functions: Switching mm/inch, coordinate selection ABS/INC, halving of displayed value, reference mark, tool programming for 200 tools, taper calculation, radius/diameter mode, rapid zeroing, counting direction reversal >> 1 new 160 mm 3-jaw chuck, 2 sets of jaws >> Multifix B toolpost with 2 holders >> Chip guard/back panel >> Coolant system About the machine: Offered here is an Emcomat 17D lead and feed screw lathe, approx. year 2000, in very good condition. The machine is, of course, fully functional. The bed ways are in very good condition. This Emco is equipped with a brand new K&C 3-axis digital readout and a new 3-jaw chuck. Take the opportunity to inspect this machine under power on site and see the condition for yourself.