Pracovná plošinová náves

FAYMONVILLE MAX Trailer MAX210 Telesattel Megatrailer

Our complete vehicle inventory, including immediately and short-term available vehicles, can be found on our website.

Excerpt of equipment. Full specification available on request.

Loading platform
* Double-extendable design with pneumatically operated locking mechanism
* 2 pairs of flush-mounted lashing rings (LC 5,000 daN)
* 1 pair of flush-mounted lashing rings (LC 10,000 daN)
* 7 pairs of outward-folding lashing rings (LC 5,000 daN)
* 3 pairs of outward-folding lashing rings (LC 10,000 daN)
* Cut-outs in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN)

Landing Legs
* JOST mechanical landing legs, 2-speed gearbox, approx. 24 t lifting capacity (test load approx. 50 t)

Tyres
* 235/75 R 17.5, 3PMSF

Axles
Fgjdpok Ugacjfx Agueh
* BPW axles, hydro-mechanically forced-steered
* Air suspension with raise/lower valve

Brake system
* In accordance with EU regulations with EBS-E (2S2M) without connection lines to the tractor unit

Steel construction
* Made from high-strength fine-grain steel. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)

Paintwork
* Premium, durable corrosion protection of the standard shot-blasted welded frame guaranteed by 2-component (2K) zinc dust primer
* High-quality, single-color 2-component (2K) topcoat finish in RAL 3002 carmine red
* Rear section metallized and painted in RAL 9010 (pure white)
* Rims in silver

Incl. Accessories
* Remote rear and front steering control via cable remote with push buttons, with single-track monitoring of the axles (without installation in tractor unit)
* Electro-hydraulic unit
* 4 wheel chocks with holders on the front wall
* 2-inch kingpin
* Yellow-red air couplings on the galvanized connection plate at the front
* Yellow reflector tape according to EU regulations at the sides, extension and rear of the trailer
* European reflective plates (red-yellow) at the rear of the trailer
* One mudflap at the rear of the trailer
* Manual and documentation on USB stick
* Loading platform with heavy-duty hardwood floor
* 10 pairs of stake pockets for plug-in stakes 100 x 50 mm on the outer frame of the loading platform
* Mounting bracket for beacon at the rear of the trailer
* Galvanized supports under the tapered section of the loading platform
* Mounting bracket for beacon at the rear of the trailer
* Mounting rail for ALU drive-on ramps at the rear of the vehicle
* 80 km/h speed stickers at the rear and both sides
* Load gauge to determine axle loads incl. load diagram
* Galvanized steel front wall (EN12642-XL), approx. 1,600 mm high
* Central lubrication system with 2 BEKAMAX (Pico) pumps, NLGI-2 standard grease, and removable protection around the pumps
* Spiral cable to supply the electro-hydraulic unit and/or electric winch (approx. 35 mm², approx. 3.5 m, max. 250 A), between trailer and tractor unit with plug connection (NATO-NATO)
* Painted sand layer on the central beam as anti-slip
* 6 pairs of WADER container locks in the loading platform for 1 x 20' container, 2 x 20' containers or 1 x 40' container; an additional locking point is provided in the extension for a 45' container
* 5 transverse rows of stake pocket strips in the loading platform for plug-in stakes 100 x 50 mm
* Storage for max. 9 pairs of plug-in stakes approx. 100x50 mm, inside front wall
* One INOX toolbox, approx. 1,500 x 390 x 810 mm, under the loading platform, left and right in direction of travel
* Four warning signs extendable by approx. 400 mm,

Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.