Pracovná plošinová náves

FAYMONVILLE Telemax Sattelauflieger - hydr. gelenkt

Our complete vehicle inventory, including immediately and shortly available vehicles, can be found on our website.

Excerpt from the equipment list. Complete specification upon request.

CARGO AREA:
* Gooseneck, length approx. 4,300 mm, with central beam
* Cargo area with double extendable design, length approx. 9,300 mm
* On the central beam, a fixed support table approx. 200 mm wide is welded
* Pneumatic locking with tapered locking bolts and reinforced locking positions, supply lines are protected inside the extendable beams and automatically adapt to the respective platform length (except for the first locking supply)
* Technical king pin load: 25,000 kg For tractor units: 4 x 2, 6 x 2, and 6 x 4
* TPMS tire pressure monitoring system in accordance with ECE R 141
* BPW axles and suspension, all axles hydraulically/mechanically forced-steered, mounted on turntables
* Technical axle load: 12,000 kg each
* Air suspension with lift and lower valve
Dsdpfx Asxc Axxjdyjup
* 275/70 R 22.5 3PMSF twin tires; brand at our discretion
* ASPÖCK-UNIBOX at the front connection bar with 24N, 24S, and 15-pin sockets
* 3 kW electro-hydraulic unit for hydraulic operations control. Without supply line installation at the tractor unit
* 4 pairs of recessed lashing rings on the gooseneck outer frame, foldable outwards
* At the king pin, 1 pair of lashing rings (LC 10,000 daN); all other lashing rings (LC 5,000 daN)
* 4 pairs of stake pockets integrated into the gooseneck outer frame for plug-in stakes approx. 100 x 50 mm
* 1 crosswise stake pocket rail mounted in the gooseneck floor for plug-in stakes approx. 100 x 50 mm. 1 at the rear of the gooseneck
* 2" king pin
* Mechanical landing legs with 2-speed gearbox and hand crank
* Approx. 32 mm wooden flooring encased in ALU omega profiles on the gooseneck and cargo area
* 10 pairs of recessed lashing rings lying in the cargo area outer frame, foldable outwards: - in front of the last axle and at the trailer end crossmember, one pair each of lashing rings (LC 10,000 daN) - all other lashing rings (LC 5,000 daN)
* 8 pairs of stake pockets integrated into the cargo area outer frame for plug-in stakes approx. 100 x 50 mm
* 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the cargo area on the left in direction of travel
* Steering from front and rear can be controlled via cable remote, with axle alignment monitoring, without installation into the tractor unit
* Steel front wall, approx. 1,800 mm high, certified according to EN12642 : 2016 XL
* Circular NATO socket at front connection bar (Maeler & Kaege VG 96 917)
* 1 LED work light each left and right at the landing legs, wired to the tractor unit connection bar
* 3 crosswise stake pocket rails mounted in the cargo area floor for plug-in stakes approx. 100 x 50 mm
* 1 additional removable intermediate table, approx. 500 mm wide, for the large cross-section pull-out pipe, with hardwood covering
* 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the cargo area on the right in direction of travel
* 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the cargo area on the left in direction of travel
* WADER container pockets in the cargo area for transport of: 1x 20' container at load center, 2x 20' containers, 1x 40' container
* 1 LED work light each left and right in front of the axles

Inzerát bol automaticky preložený. Chyby v preklade sú možné.