Jemný zaslepovací lis

FEINTOOL MFA 2500

Stav: použitý, Swing diameter over bed: 2400 mm Swing diameter over carriage: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Faceplate diameter: 1650 mm Speed range: 1.5 – 150 rpm Max. workpiece weight: 70,000 kg Gijdpfjxddvnsx Aftsl Clamping diameter: 1400 mm Technical Data Working Area Maximum swing diameter over carriage: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in headstock faceplate: 300 – 1600 mm (with special jaws up to 2050 mm) Clamping diameter in tailstock faceplate: 300 – 1400 mm Maximum workpiece weight: 70,000 kg Main Drive, Faceplate Faceplate diameter: 2000 mm Faceplate speeds, infinitely variable in 4 stages: 1.5 – 150 rpm Maximum torque at rated speed: 220,000 Nm Main motor drive power: 185 kW Flange centre tip angle: 70° Carriages Travel of parting slide: 500 mm Travel of facing slide: 1400 mm Rapid traverse longitudinal: 2000 mm/min Rapid traverse cross: 800 mm/min Infinitely variable feeds, longitudinal: 0.6 – 300 mm/min Infinitely variable feeds, cross: 0.3 – 120 mm/min Maximum cutting force at carriage: 20,000 kg Tailstock Diameter of faceplate (removable): 1650 mm Clamping diameter of faceplate: 1400 mm Flange centre tip angle: 70° Rapid traverse: 1250 mm/min Special Equipment Copying device for first carriage - Copying length: 8500 mm - Max. copying depth in a single pass: 500 mm Boring device: - Boring bar: 460 x 390 mm - Boring diameter: 600 – 1000 mm - Max. boring depth in a single pass: 2700 mm At Ks of 200 kp/mm² – max. s = 1.5 mm/rev a = max. chip cross-section 30 mm² at overhang of 1000 mm Chip cross-section decreases with increasing boring depth A taper turning attachment with setting angle up to 8° and max. taper length (in one pass) of 2000 mm, setting accuracy ± 5 minutes. A taper turning attachment with setting angle up to 15° and max. taper length (in one pass) of 1000 mm, setting accuracy ± 5 minutes. 125 kg auxiliary crane on spindle head.

Stav: pripravené na použitie (použité), Rok výroby: 2001, CNC frézka TOS TV-1000 A CONTUR Výrobca: Trens Model: MC 100 VA Rok výroby: 2001 Gijdpfx Aohlp Iweftsl Stav: Použité Riadiaca jednotka: Heidenhain TNC 426 Pojazd osi X: 1000 mm Pojazd osi Y: 600 mm Pojazd osi Z: 760 mm Dĺžka stola: 1080 mm Šírka stola: 580 mm Nástrojový menič s 40 pozíciami Upínanie nástrojov podľa ISO 40 Otáčky vretena: 8000 ot/min Celkové rozmery: D 3200 x Š 2100 x V 2900 mm Hmotnosť: 6200 kg Doprava možná po celom Nemecku a Rakúsku. Príplatok 1000 € Predaj bez záruky.

Stav: použitý, Rok výroby: 2002, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6/3.5 m Photos show an identical machine with a centre height of 225 mm Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding head UR with T1-T2-T3 Standard Equipment: - T1 500 mm grinding wheel diameter - T2 400 mm grinding wheel diameter - B-axis infinitely variable, high-resolution - Marposs measuring device for tool measurement - Active longitudinal positioning - GAP monitoring for T1 and T2 from ELASO, contactless, integrated in the control interface - Semi-automatic balancing from ELASO integrated in the control interface - Tailstock with manual retraction - Workpiece spindle head MK5 with short taper mounting DIN 55026 - Internal grinding device, belt-driven Options at extra charge: - New high-precision workpiece spindle head with torque drive - Internal grinding device for high-frequency spindles, diameter 120 mm - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface, 24,000 rpm, with integrated GAP sensor (delivery time required) - CNC-controlled C-axis - Non-circular grinding - Hydrostatic ballscrew on X-axis - New hydrostatic system with only one pump and accumulator for improved energy efficiency - Monitoring of the water content in the hydrostatic system - Extraction unit Other options available on request Mechanical Overhaul: - Complete overhaul of the machine according to Kellenberger measurement protocol - New, service-friendly machine enclosure - New paintwork Electrical Overhaul: - New, modern CNC CYLINDRICAL GRINDING MACHINE control system with BEMA cylindrical grinding interface - Newly built switch cabinet - New drive technology - Replacement of all electrical cables, pressure switches, etc. - New absolute glass scales on X and Z axes - New absolute rotary encoder (for B-axis) Control System: The grinding software consists of a basic license and various options depending on the machine’s configuration. Software Basic Gedeuxfucjpfx Aftoil - External and internal longitudinal grinding - External and internal plunge grinding - External and internal face longitudinal grinding - External and internal face plunge grinding - External and internal taper longitudinal grinding - External and internal radius grinding, radius dressed onto the wheel - Semi-automatic longitudinal grinding - Workpiece zero setting - Grinding wheel zero setting - Measurement of dressing diamonds - 2 form diamonds - 1 form diamond or dressing roll (dressing roll required) - Form roll (dressing roll required) - 3 flat dressers - Corrections - Z-position measuring (probe required) - GAP measurement (pre-grinding device required) OPTIONS at extra charge: Software Profile Plunge Grinding: - External and internal profile plunge grinding with profile wheel Software Profile Grinding: - External and internal profile grinding with straight wheel Software Thread Grinding: - Single and multi-start external and internal thread grinding with thread dressed onto the wheel. Dressing of single and multi-groove wheels. Flank angle freely selectable. Software Trapezoidal Thread Grinding: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge grinding: - External and internal non-circular longitudinal grinding Software Non-circular Grinding: For non-circular grinding, the workpiece axis must be equipped with a high-resolution encoder in order to operate the axis as a C-axis. The non-circula

Stav: použitý, Rok výroby: 2008, Článok: Vertikálne sústružno-brúsne centrum Značka: EMAG Typ: VSC 250 DS Rok výroby: 2008 Riadenie: SIEMENS 840D Otáčky brúsnej vretena: 30 000 ot./min Otáčky sústružnej vretena: 3 000 ot./min Počet nástrojových pozícií v revolveri: 12 Gisdpfx Ajia Rtdjftjl Chladič pre chladenie vretena a lôžka stroja Zdvihacia stanica pre chladiacu kvapalinu (bez vlastného systému dodávania chladiacej kvapaliny) Dopravník triesok Manipulácia s dielmi Vzduch cez vreteno Dva upínacie okruhy cez vreteno (vzduch a olej) Brúsna vreteno je bohužiaľ nefunkčné. Dá sa však generálne opraviť v špecializovanej dielni na vretená. Inak je stroj vo veľmi dobrom stave a plne funkčný. Pre viac informácií a fotografie nás prosím kontaktujte e-mailom (at) alebo

Stav: dobrý (použitý), Rok výroby: 1997, Stroj je v dobrom stave. Gijdpfx Afopy Erretel

Stav: veľmi dobrý (použitý), Rok výroby: 2001, prevádzkové hodiny: 47 600 h, číslo stroja/vozidla: 325, Systém: TX8H Vretenový priechod: 80 mm Maximálna dĺžka sústruženia: 750 mm Priemer sústruženia: 340 mm Výkon: 22 kW Počet miest na nástroje: 12 Gsdpfoh Dzqlsx Aftoil Priemer stopky: 40 mm Poháňané nástroje na všetkých pozíciách Os X Os Z Os C Automatický koník Dopravník triesok

Stav: veľmi dobrý (použitý), Rok výroby: 2009, CNC riadiaca jednotka: M720BM Kapacita Pohyb osi X mm: 260 Pohyb osi Y mm: ±50 (100) Gedjxcqz Ispfx Aftjil Pohyb osi Z mm: 795 Dĺžka sústruženia mm: 705 Max. priemer sústruženia mm: ø 356 Obežný priemer nad lôžkom mm: ø 923,8 Obežný priemer nad suportom mm: 755 Kapacita pre podávanie tyčí mm: 80 C-os v stupňoch: 0,001° Horná revolverová hlava Počet držiakov náradia ks: 12 Otáčky poháňaných nástrojov ot./min: 6.000 Výkon pohonu poháňaných nástrojov kW: 5,5/3,7 (3 min/nepreruš.) Čas indexovania s: 0,25 Hlavné vreteno Otáčky vretena ot./min: 4.000 Výkon pohonu vretena kW: 18,5/15 (25 % ED/nepreruš.) Priemer otvoru vretena mm: ø91 Koník Posuv koníka mm: 734 Upínanie: MT5 Vybavenie Dopravník triesok Rameno na meranie náradia

Stav: pripravené na použitie (použité), Rok výroby: 2017, dĺžka sústruženia: 3 000 mm, sústružnícky priemer: 1 050 mm, maximálna rýchlosť vretena: 1 500 ot./min, vonkajší priemer skľučovadla: 375 mm, Viacúčelový obrábací stroj OKUMA MULTUS B750 C3000 Rok výroby: 2017 Riadiaci systém: OSP-P300SA Skľučovadlo: 15" Maximálny priemer obrábania: 1050 mm Maximálna dĺžka obrábania: 3000 mm Gedpfxjwi Ezrj Aftsil

Stav: dielensky repasované (použité), Rok výroby: 2017, prevádzkové hodiny: 6 900 h, Funkcionalita: plne funkčný, pojazdová vzdialenosť osi X: 350 mm, zdvih osi Y: 250 mm, zdvih osi Z: 300 mm, Maximálna hmotnosť obrobku: 500 kg Pojazdy: X: 350 mm Y: 250 mm Z: 300 mm C: 360° Rok výroby: 2017 Gjdpev Ai Ukefx Aftjil 16-polohový výmenník RTC

Stav: dobrý (použitý), brúsený priemer: 1 600 mm, dĺžka brúsenia: 6 000 mm, Manufacturer: CINCINNATI Model: 60 x 216 Year of manufacture: 1970 Convex and Concave Grinding 6 steady rests included 2 steady rests, hydrostatic Coolant system with magnetic filter Gjdpfxjvvvw Ej Aftoil Measuring system with 5 arms, gauge: Arm 1: Working area 1300 to 1600 mm Arm 2: Working area 1000 to 1300 mm Arm 3: Working area 700 to 1000 mm Arm 4: Working area 400 to 700 mm Specifications Metric US Standard Center height: 787 mm Grinding diameter Ø: 1574 mm Grinding length: 5800 mm Grinding wheel dimensions: 914 x 101.6 x 304.50 mm Grinding wheel speed: 1800 rpm Dimensions (approx.): Length: 15100 mm Width: 5500 mm Height: 3550 mm Weight: 120000 kg Please note: The information on this page has been compiled by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, no representation or contractual terms shall be construed. We recommend verifying all critical details.