Excentrický lis - jeden stĺpec

FMS PF - 30 P

Stav: takmer ako nový (použitý), Rok výroby: 2024, Overhauled: 2024 Year of manufacture: 1994-2000 Saw blade: 560 mm Motor power: 6.5 / 8.0 kW Speed: 1500/3000 rpm Cutting speed: 2100 – 4200 m/min Saw height adjustment: electronic Max. working area square: 170x170 mm Max. working area flat: 300x150 mm Max. working area round: 200 mm Saw feed rate: 0 – 40 mm/s, steplessly adjustable Cut-off length: 5-950 mm (9999 mm with multiple stroke) Max. feed speed: 500 mm/s Weight: approx. 1900 kg Dimensions LxWxH: 2200 mm x 2700 mm x 1950 mm After completion of the retrofit, the machine is in an as-new condition, both technically and visually. Thanks to its equipment and design, the machine is highly efficient and suitable for a wide range of applications. The programmed HMI control ensures simple and very cost-effective operation. The soundproof cabin reduces noise emissions to a minimum. The machine is fully overhauled in our workshop upon customer request. The following components, among others, are renewed: - Conversion to Siemens S7 PLC control - Upgrade to Siemens HMI operator interface - Replacement of ball screw spindle - Replacement of servo motor and servo drive - New electrical components - New pneumatic lines - New pneumatic components - Overhaul or replacement of all pneumatic cylinders - Renewal of the valve block - Optimization of extraction performance - Overhaul of minimum quantity lubrication system - Replacement of general wear parts - Overhaul of the cabin Additionally, the machine features: - Soundproof cabin Dwsdpfjuiy Hrex Am Tsb - Kerf extension (for high-quality cut surfaces without return marks) - Fully electronic height adjustment Warranty: Unless otherwise agreed, we provide a 6-month warranty on all systems for all parts overhauled or replaced by us. Labor and wear parts are excluded from the warranty. Optional: - Multi-piece clamping device for parallel sawing of multiple workpieces - Flat magazine for automatic feeding of pre-materials up to 6 m in length - Roller conveyors for pre-material - Reinforced motor 18.0 kW (frequency-controlled) - Delivery and installation at your site - Training of your staff

Stav: generálne opravený (použitý), Rok výroby: 2024, Completely overhauled: 2024 Control system: Siemens S7 PLC Max. saw blade diameter: 500 mm Motor power: 4.0 kW Saw blade feed: 0-40 mm/s, infinitely adjustable Electronic saw height control Working area, square at 90° max.: 130 x 130 mm Working area, flat at 90° max.: 190 x 130 mm Working area, round at 90° max.: 170 mm The machine has been completely overhauled in our workshop and is in like-new condition. Among other things, the following work was performed: Conversion to Siemens S7 PLC control Dwjdpfeuiy Ngjx Am Tjb Upgrade to Siemens HMI operator interface Retrofit to pusher with servo control New electrical components New pneumatic lines New pneumatic components Conversion to valve terminal Extraction performance optimized New minimal quantity lubrication system Replacement of general wear and tear parts Overhaul of the enclosure The machine is additionally equipped with: Minimal quantity lubrication Spacer extension (for high-quality cut surfaces without return marks) Preload magazine for careful handling of painted/anodized surfaces Scrap piece ejection integrated in the pusher Folding scrap piece tray Options: Magazine width 3000 mm Pusher length 6000 mm Pusher length 8000 mm Reinforced motor 5.5 kW Mass clamping device for parallel sawing of multiple workpieces Online support connection Delivery and installation at your facility Staff training

Stav: dobrý (použitý), Rok výroby: 1977, Funkcionalita: plne funkčný, výkon: 15 kW (20,39 k), lisovacia sila: 200 t, šírka stola: 800 mm, dĺžka stola: 1 100 mm, hĺbka hrdla: 440 mm, tabuľka vzdialeností k piestu: 400 mm, celková dĺžka: 37 200 mm, celková šírka: 24 000 mm, celková výška: 18 200 mm, celková hmotnosť: 12 600 kg, nastavenie hydraulického valca: 110 mm, Zdvih piestu: 40–180 mm vrátane podávača Helmerding, 400 mm x 4 mm Dwodpfxjtu Hvwj Am Tsb Počet zdvihov: 40 + 60 pohybov/min Vzdialenosť medzi stolom a piestom – nastavenie hore/dole (spodná poloha zdvihu): 400 mm Otvory v stole: priemer 450 mm

Rok výroby: 2023, stav: nový, Tlak: 40 t Vyloženie: 195 mm Zdvih: 8–78 mm Počet zdvihov: 76–190 zdvihov/min Nastavenie piesta: 60 mm Rozmer stola: 650 x 380 mm Výška stola: 840 mm Priebežný otvor v stole: Ø 110 mm Plocha piesta: 250 x 350 mm Otvor na čap v pieste: Ø 40 mm Celkový príkon: 3 kW Hmotnosť stroja cca: 2,2 t Rozmery stroja (ŠxHxV): cca 1450 x 1220 x 2110 mm Číslo stroja: 16053 LED strojové osvetlenie Počet zdvihov frekvenčne riadený Sick svetelná clona pre bezpečnostný a taktovací režim 4x elektronicky programovateľné vačky 4x programovateľné istenie nástroja Strojové nohy Dsdep Udupopfx Am Tjwb Obsluha oboma rukami Nožné ovládanie Centrálne mazanie Mechanická poistná doštička v pieste Pneumatická kombinácia spojky a brzdy Schválené pre ručné zakladanie Možnosť sklopenia o 25°

Stav: nový, Rok výroby: 2024, Pressure: 20 t Outreach: 155 mm Stroke: 6–60 mm Stroke rate: 84–210 strokes/min Ram adjustment: 50 mm Installation height, upper, ram adjustment at top: 300 mm Table surface: 300 x 450 mm Table height: 840 mm Pass-through opening in table: Ø 90 mm Ram surface: 190 x 278 mm Bore in ram: Ø 25 mm Total power requirement: 1.5 kW Machine weight approx.: 1.0 t Space requirements approx. (W x D x H): 1100 x 1100 x 1900 mm Dsdpfx Amjvfhqio Tjwb Machine no.: 16144 LED machine lamp Stroke rate frequency controlled Sick light curtain for protection and cycle operation 4x freely programmable electronic cams 4x freely programmable tool safeguarding devices Machine feet Two-hand operation Foot operation Central lubrication Pneumatic clutch-brake combination Approved for manual loading operations

Stav: použitý, Rok výroby: 1961, Pressure: 25 t Throat depth: 200 mm Stroke: 4 - 80 mm Table clamping surface: 595 x 410 mm Djdetqqxbopfx Am Tewb Ram adjustment: 70 mm Number of strokes: 150 strokes/min Table height adjustment: 240 mm Total power requirement: 1.1 kW Machine weight: approx. 1.45 t Machine dimensions (L x W x H): 1.30 x 0.80 x 2.0 m

Rok výroby: 2023, stav: nový, Pressure: 30 t Outreach: 180 mm Stroke: 8–76 mm Strokes per minute: 80–200 spm Ram adjustment: 60 mm Table surface: 360 x 580 mm Table height: 840 mm Thru-hole in table: Ø 110 mm Ram surface: 250 x 350 mm Pin hole in ram: Ø 40 mm Total power requirement: 3 kW Machine weight approx.: 1.8 t Required space approx. (WxDxH): 1350 x 1200 x 2100 mm Machine no.: 16051 LED machine light Frequency-controlled stroke rate Sick light barrier for safety and automatic operation 4x freely programmable electronic cams 4x freely programmable tool safeties Machine feet Dodop Uduhopfx Am Tswb Two-hand operation Foot operation Central lubrication Mechanical shear plate in ram Pneumatic clutch-brake combination Approved for manual loading operations

Rok výroby: 2004, stav: generálne opravený (použitý), Precízny podávací mechanizmus pre pásy do cca 100 mm a hrúbky do 2 mm Podávacia sila 400 N, opakovacia presnosť +/- 0,04 mm Dedpfx Amjg Iiuxs Tjwb

Stav: dobrý (použitý), Dierovačka, dierovací stroj, dierovacie zariadenie, dierovací lis, dierovačka, kopírovacia dierovačka, dorazová dierovačka, dierovačka, excentrická dierovačka, viacreťazová dierovačka, dierovací stroj, dierovacia lisovacia stanica Dwodpfoik Sl Hjx Am Tjb -Výrobca: Mubea, dierovačka typ KL 100 s 2-osým digitálnym ukazovateľom -Tlačná sila: 100 t -Dierovacia kapacita: pozri foto typového štítku -Hĺbka vyloženia ramena: 535 mm -Stôl na materiál: 1240 x 615 mm -Pojazd: x = 1100 mm / y = 600 mm -Digitálny ukazovateľ: Heidenhain 2-osý digitálny ukazovateľ -Príslušenstvo: vrátane, pozri fotografie -Celkové rozmery: 2200/2020/V2110 mm -Hmotnosť stroja: 3145 kg -Hmotnosť príslušenstva: 693 kg

Stav: nový, Drilling capacity in steel (diameter): 40.0 mm Thread cutting: M30 Maximum workpiece height: 380 - 785 mm Arm reach: 985 mm Spindle taper: MT 4 Drill head swivel range right/left: -80 / +80 degrees Table surface: 1210 x 520 mm Speed range: 50 - 2000 rpm Column diameter: 220 mm (Repeated) Column diameter: 220 mm (Alternative) Table surface: 1210 x 510 mm Quill stroke: 200 mm Spindle feed range: 0.08 - 0.50 mm/rev Total power requirement: 2.2 kW Machine weight approx.: 2800 kg Space required approx.: 2450 x 1200 x 2720 mm Djdpsxaadyofx Am Tewb Features: - Wide range of clamping and machining options due to the design-specific construction - Electromotoric height adjustment of the drilling head without altering the drilling position, ideal for deep hole drilling - Drill head can be swiveled 180°, arm can be moved forward and backward as well as swiveled horizontally - Thread cutting device and 6 automatic drill feeds included in the standard equipment - Large table surface (1195 x 500 mm) for clamping several workpieces simultaneously - Digital speed and drilling depth display included - Quick setup of the drilling head on the workpiece, locking is hydraulic - Strongly ribbed column ensures high stiffness of the arm - Stable construction guarantees vibration-free operation - Electronic stepless speed control as standard Scope of delivery: - Electromagnetic spindle feed - Digital speed display - Digital drilling depth display - Electromotoric drill head adjustment - Initial fill with Shell Tellus 46 - Quick-action drill chuck 1 - 13 mm / B 16 - Drill chuck arbor MT 4 / B 16 - Reducing sleeves MT 4 / 3, 4 / 2, 3 / 1 - Thread cutting device - LED machine lamp - Coolant system - Height-adjustable safety guard