Stroj na tlakové liatie s horúcou komorou - vertikálny

FRECH W20Zn-RC

Stav: pripravené na použitie (použité), Rok výroby: 1989, An aluminum die casting plant is available. Clamping force: 2,200 kN, opening force: 71 kN, max. opening stroke: 430 mm, mold locking: double toggle lever, shot chamber: cold chamber, orientation: horizontal. Plunger diameter min./max.: 40 mm/70 mm, shot chamber fill volume min./max.: 293 cm³/898 cm³, injection pressure: 1,990 bar, projected area min./max.: 110 cm²/338 cm², output: 780 cycles/h. Platen dimensions X/Y: 755 mm/755 mm, tie bar spacing: 500 mm/500 mm, mold height min./max.: 250 mm/600 mm, min. mold dimensions X/Y: 296 mm/296 mm. Inclusive of crucible furnace, air blow-off unit, dosing unit, and 4x control cabinets. Documentation available. Hodsucfwpepfx Agkefh

Stav: nový, Rok výroby: 2020, Clamping force 600 kN Clamping plate 460x460 mm Tie bar spacing 300x300 mm Hfjdpfxsiu Smbo Agkeh Clamping stroke 230 mm Ejector stroke 70 mm Ejector force 40 kN Mold height 120-350 mm Tie bar diameter 56 mm Die casting force 54 kN Die casting stroke 130 mm Plunger diameter 45, 50, 55 mm Casting volume (DIN 24480) 109, 150, 194 cm³ Specific casting pressure 339, 274, 226 daN/cm² Associated parting surface 176, 218, 264 cm² Machine weight approx. 3.5 t Machine Equipment 1.0.1 Clamping unit cover on machine baseframe 1.0.2 Clamping unit cover on baseframe for scale / chute 1.1.0 Motorized safety door to the left in casting direction 1.4.0 Machine mountings 1.5.4 Interior machine lighting 1.11.0 Equipment package – Energy efficiency 2.0.1 Ejector advantage package 2.4.2 Ejector plate safety on mold side 2.6.4 SensiLock® machine assistance system 2.8.0 Hydraulic adjustment of clamping unit 3.1.1 Nitrogen pressure monitoring for piston accumulator 3.2.4 Multi-chamber holding and melting furnace 3.2.5 Insulated crucible cover for multi-chamber furnace 3.4.4 Pre-fill casting system 3.4.5 Simplified plunger removal 3.4.6 Plunger stop on return stroke 3.5.2 Electric nozzle and casting pot heating 4.5.0 Shut-off device for hydraulic assemblies 4.6.1.2 Integrated water circuit control 2+4 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.2 Equipment package – Casting comfort 5.2.1 Ejector pressure graph 5.4.1 Scope data acquisition 5.4.2 Programmable inputs and outputs 5.6.0 Special cable lengths 6.0.0 INTERFACES / OPERATING CONCEPTS 6.1.3.1 Digital interface for third-party extraction unit 6.1.4 Serial interface for 4 heating/cooling circuits 6.3.1.1 Operator unit with visualization on support arm 6.5.2 RSD equipment package with switch 7.0.0 ADDITIONAL DEVICES 7.2.2.2 Spraymotion 611 E with servo drive 7.2.10 Extended spraying program 7.3.1 Release agent container TD 20 7.4.0.2 Spray bar CR 245 7.12.3 Noise-attenuated reject chute OF70 70 years FRECH – Anniversary package

Stav: vyžaduje opravu (použité), Rok výroby: 2001, Funkcionalita: nefunkčný, FRECH DAK 720-71 RC tlakový liaci stroj, použitý Výrobné číslo 440403, upínacia sila 8000 kN, zdvih upínania 825 mm, vyhadzovacia sila 364 kN, vyhadzovací zdvih 180 mm, výška formy 350 až 1000 mm, upínacie platne 1300 x 1300 mm, vzdialenosť stĺpov 825 mm, priemer stĺpov 180 mm, maximálna liacia sila 713 kN, zdvih piestu 600 mm, priemer liaceho piestu 70 až 120 mm, objem dávky 1539 až 4523 cm³, pracovný tlak 160 bar, pohonný motor 45 kW, s dávkovacou pecou MELTEC AVDF 1200/5000, rok 2017, sériové číslo systém, Hodpfewc Tdzsx Agkjfh ako donor náhradných dielov Technické parametre rozmery (d x š x v) cca. 8000 x 7500 x 3500 mm hmotnosť cca. 36000 kg rok výroby 2001

Stav: pripravené na použitie (použité), Rok výroby: 2011, Pressure: 135 t Bending length: 3050 mm Upright distance: 2600 mm Throat depth: 410 mm Approach speed: 160 mm/sec Working speed: 10.0 mm/sec Return speed: 120 mm/sec Stroke: 265 mm Installation height: 530 mm Table height: 900 mm Oil capacity: 200 ltr. Control: DNC 880 S Operating hours: approx. 17,200 h Total power requirement: 15.0 kW Machine weight: approx. 10,250 kg Dimensions (LxWxH): 4570 x 2360 x 2900 mm Condition: Good (!!) Hfedpfx Aexablrogkoh Current new price: approx. 80,000 Euro Special price on request - Supplied in checked condition - machine video - ?v=dyv7iQXcRt4 ?v=SZa0M0bJoS0 Features: - Electro-hydraulic CNC press brake - Two synchronized cylinders with "HIGH PERFORMANCE" hydraulic components - With CYBELEC CNC control – "DNC 880S" * 2D graphical display for visualization and multiple simulation * Graphical 2D programming * Easy operation * Automatic calculation of bending sequences and collision detection * Extensive product and tool library * Automatic tonnage calculation (pressure) - Pivoting control panel, front right - CNC-controlled axes: Y1 + Y2 + X + R + CNC crowning - Upper beam with robust, self-lubricating four-sided guide - CNC electro-motorized backgauge (X-axis) * With 2 manually adjustable backgauge fingers * Adjustment range up to max. 650 mm - CNC electro-motorized height adjustment of the backgauge (R-axis) * Adjustment range up to max. 250 mm - CNC electro-motorized table crowning - AMADA/RAPID pneumatic upper tool clamping - AMADA lower tool holder, including die shoe - FIESSLER LASER safety system at the front - 2 front, sliding support arms ("Sliding" system) - Side safety guards (pivoting doors) - Rear safety guard (pivoting door) - 1 mobile foot switch - Large hydraulic oil tank to maintain low operating temperature - Original operating manual

Stav: použitý, Rok výroby: 1994, Clamping force: 600 kN Clamping plate: 460x460 mm Distance between tie bars: 300x300 mm Machine weight: approx. 4.5 t Clamping stroke: 230 mm Hsdotuxmyopfx Agkefh Ejector force: 40 kN Ejector stroke: 70 mm Mould height: 120-350 mm Tie bar diameter: 56 mm Injection force: 55 kN Injection stroke: 130 mm Injection plunger diameter: 45, 50, 55 mm Injection volume (DIN 24480): 76, 121, 165 cm³ Specific injection pressure: 345, 280, 231 kp/cm² Corresponding parting surface: 174, 214, 260 cm² Retraction stroke: 150 mm Used machine DAW 50 as a basis for a general overhaul, without control cabinet, furnace, and furnace cabinet. A general overhaul can be carried out in the manufacturer's reconditioning workshop upon request. The scope of the overhaul can be agreed individually.

Stav: použitý, Rok výroby: 1994, Funkcionalita: obmedzená funkčnosť, Použitý Oskar Frech DAW 125 so spínacou skriňou a taviacim kotlom Hedpfowywn Ejx Agksfh

Stav: nový, Rok výroby: 2024, Clamping force: 2200 kN Clamping platen: 755 x 755 mm Tie bar spacing: 500 x 500 mm Machine weight: approx. 8 t Clamping stroke: 430 mm Ejector force: 110 kN Ejector stroke: 100 mm Mould height: 250–600 mm Tie bar diameter: 85 mm Injection force: 130 kN Injection stroke: 175 mm Die plunger diameter: 70, 80, 90 mm Casting volume (DIN 24480): 450, 636, 856 cm³ Specific casting pressure: 335, 260, 203 kp/cm² Corresponding parting surface: 656, 846, 1078 cm² Drop stroke: 230 mm Machine equipment: 1.1.1 Motorised safety door, casting direction right 1.4.0 Machine mountings Hodpfx Agjvvx Hcjksfh 1.5.4 Machine interior lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Ejector assistance packages 2.1.2 Core pull device M2 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of clamping unit 3.0.1 Casting assistance packages 3.0.1.2 Casting Assistance Package Technology 3.2.9 EcoMelTec multi-chamber holding and melter furnace 3.4.4 Pre-fill casting system 3.4.5 Simplified die plunger removal 3.5.2 Electric nozzle and casting container heating 3.5.3 Plug-in connections for electric nozzle and casting container heating 4.3.1 Additional heat exchanger 4.5.0 Shut-off device for hydraulic assemblies 4.6.1.4 Integrated water circuit control, 2+8 circuits 5.1.1 Machine control DATADIALOG – Shot Stop 5.1.5 Maintenance advantage package 5.6.1 Cable lengths 6.1.3.1 Wired signal interface for parts removal 6.1.4 Serial interface for 4 heating/cooling circuits 6.1.5 Interface for vacuum device 6.1.7 Frech interface for gatekeeper function 6.5.2 Equipment package RSD with switch 7.2.3.3 Spraymotion 811 E with servo drive 7.2.10 Extended spraying program 7.3.1 Release agent container TD 20 7.4.0.6 Spray bar CR 458

Stav: nový, Rok výroby: 2024, Clamping force: 900 kN Clamping plate: 540 x 540 mm Tie bar spacing: 350 x 350 mm Machine weight: approx. 5.3 t Clamping stroke: 280 mm Ejector force: 61 kN Ejector stroke: 70 mm Mould height: 160–400 mm Tie bar diameter: 65 mm Injection force: 78 kN Injection stroke: 130 mm Injection plunger diameter: 50, 55, 60 mm Injection volume (DIN 24480): 147, 191, 241 cm³ Specific injection pressure: 396, 327, 275 daN/cm² Corresponding split surface: 226, 274, 326 cm² Eject stroke: 220 mm Machine Equipment 1.0.2 Clamping area cover on base frame for scale / chute 1.1.0 Motorised safety door, casting side left 1.4.0 Machine mountings 1.5.4 Machine interior lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Ejector upgrade package 2.6.4 SensiLock® machine assistance system 2.8.0 Hydraulic adjustment of clamping unit 3.0.1 Casting assistance upgrade package 3.2.9 EcoMelTec multi-chamber holding & melting furnace Hfoder Hwf Ajpfx Agksh 3.4.4 Casting system prefill 3.4.5 Simplified injection plunger removal 3.4.6 Injection plunger stop on return stroke 3.5.2 Electric nozzle and casting vessel heating 3.5.3 Plug-in connectors for electric nozzle and casting vessel heating 4.5.0 Shut-off device for hydraulic assemblies 4.6.1.3 Integrated water circuit control 2+6 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.5 Maintenance upgrade package 5.6.1 Special cable lengths 6.1.3.1 Digital interface for external extraction equipment 6.1.4 Serial interface for 4 heating/cooling circuits 6.1.5 Interface for vacuum unit 6.3.1.1 Operating unit with visualisation on support arm 6.5.2 Equipment package RSD with switch 7.2.2.2 Spraymotion 611 E with servo drive 7.2.10 Extended spraying program 7.3.1 Release agent tank TD 20 7.4.0.3 Spray bar CR 275

Stav: použitý, Rok výroby: 2012, prevádzkové hodiny: 55 800 h, upínacia sila: 100 kN, zdvihový objem: 201 cm³, vstrekovací tlak: 2 000 lišta, celková hmotnosť: 5 400 kg, priemer skrutkového dopravníka: 40 mm, Dodacie podmienky: zo skladu Dodacia lehota: podľa dohody Hfedpfx Agjylpyvskjh Platobné podmienky: 100 % pred prevzatím stroja, čistá suma

Stav: veľmi dobrý (použitý), Rok výroby: 2011, Funkcionalita: plne funkčný, číslo stroja/vozidla: 10499123, vzdialenosť medzi stĺpmi: 780 mm, priemer stĺpa: 150 mm, vysúvacia sila: 225 000 N, zdvih vyhadzovača: 175 mm, minimálna výška formy: 360 mm, typ vstupného prúdu: trojfázový, vstupné napätie: 400 V, upínacia sila: 6 615 kN, vstupná frekvencia: 50 Hz, Horizontálna tlaková liacia mašina Značka: Bühler, Typ: GKS EVO B66D, Rok výroby: 2011 Sériové číslo: 10499123 Výška formy: 360 - 900 mm Zdvih otvorenia formy: 800 mm Max. plošný tlak: 100 N/mm² Hjdpfxsynhzkj Agkofh Min. upínacia plocha: 620 x 620 mm Svetlá vzdialenosť medzi stĺpmi: 780 x 780 mm Priemer stĺpa: 150 mm Zdvih vyhadzovača: 175 mm Vyhadzovacia sila: 150 kN Maximálna uzatváracia sila: 6615 kN Doba cyklu: 30 s Rýchlosť liaceho piesta: 5,0 m/s Vrátane zariadenia na striekanie formy Gerlieva GS 1000/1400Z Vrátane udržiavacieho pece Westomat ProDos DPC 900kg Vrátane odoberacieho robota ABB IRB4400