Univerzálny skúšobný stroj na ťahové skúšky

GALDABINI Quasar 50 kN

Stav: veľmi dobrý (použitý), GALDABINI Type: Quasar 50 / Rated Capacity: 50 kN with PC, monitor, and test software GraphWork 5 Universal Testing Machine The universal testing machine type "QUASAR" is designed as a single-space testing system and basically consists of the following assemblies: Machine frame, with design and structure of the machine load frame engineered for the specified maximum loads wherever required: Electromechanical loading system with toothed belt drive, timing pulleys, powered by DC or brushless servo motor and recirculating ball screws. Load measurement system with force transducer suitable for tension and compression tests. Electronic control unit that manages all functions: Regulation and control, monitoring and acquisition of output signals from the force, strain, and crosshead displacement amplifiers. The system is based on a 32-bit processor clocked at 25 MHz; analog signal acquisition is carried out by an A/D converter with 20-bit resolution. The electronic controller is usually placed in the machine base. This also applies to most electrical components for drive and power supply. User interface with PC, connected to the electronic control and monitoring board via a serial RS232 interface with high data transfer rate of 38,400 baud. Rigid two-column construction with a maximum capacity of 50 kN Suitable for metals, plastics, composites, and other materials Modern design and advanced functionalities Flexible, modular setup for easy future upgrades Key technical advantages include extremely high resolution for force and displacement values, and a minimum test speed of 0.0005 mm/min for top performance and the most precise results. Technical specifications: Rated capacity: 50 kN Speed at maximum load: 0.0005÷200 mm/min Idle speed: 500 mm/min Distance between grips: 1000 mm Total traverse: 1000 mm Crosshead travel resolution: 0.1 µm Repeatability of positioning: 2 µm Distance between wedge grips: 480 mm Clearance between columns: 410 mm Force units: Newton - daN - kgf - lbs Dimensions: Height: approx. 1548 mm Width: approx. 700 mm Depth: approx. 730 mm Power supply: 220V (+10%) 50 Hz Power consumption: 0.65 kW Hodpfxsv Tywqs Agtefb Weight: approx. 255 kg without accessories Recommended lighting for use: 300 lux Condition: used Scope of delivery: (See pictures) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Rok výroby: 2006, Stav: použitý, Ultrazvukové a elektrolytické čistenie, Linka na čistenie drôtu, zariadenie na čistenie drôtu, zariadenie na úpravu drôtu Výrobca: Sirio-Wire Typ: M0209 Počet drôtov / žíl: 12 (6+6) Priemer drôtu: 1,0 - 5,5 mm; cez zariadenie však boli vedené aj hrubšie drôty a dosiahnutý čistiaci výsledok bol veľmi uspokojivý. Hjdpfef Nku Rjx Agtsfb Rok výroby: 2006 Zariadenie bolo v prevádzke len asi tri roky, potom bola výroba presunutá na inú lokalitu. Proces: ultrazvukové a elektrolytické čistenie v horúcom kúpeli Presný popis procesu nájdete na stránke výrobcu siriowire v sekcii „Ultrasonic & Electrolytic cleaning“. Zariadenie je v dobrom a použiteľnom stave, kompletné okrem čerpadiel. Na fotografiách chýba obslužný chodník a odkvapová vaňa s rámom, na ktorej zariadenie stojí; tieto fotografie budú ešte doplnené. Na posledných troch fotografiách môžete vidieť zariadenia tohto prevedenia v prevádzke.

Stav: veľmi dobrý (použitý), Here we offer you a Zwick / Roell universal testing machine, table-top testing machine. Zwick / Roell material testing machine Model: BDO-FB0.5TH Load capacity in tension/compression: 500 N Height: 1565 mm, Width: 292 mm, Depth: 469 mm Test area width: unlimited Test area depth: 100 mm Max working stroke without accessories: 1266 mm PC or printer interface: RS 232 Required PC connection (for PC operation): COM 1 Power data: 115/230 V (PH, N, PE) Rated power: 0.4 kVA Mains frequency: 50/60 Hz Weight: 47 kg Hodpfx Aod Sr S Iogtefb Type: BDO-FB0.5TH Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and information as stated!) If you have any further questions, we are happy to assist you by phone.

Rok výroby: 2022, prevádzkové hodiny: 10 h, Stav: nový, Universal Testing Machine H5TMC Mechanical Design: According to DIN EN ISO 7500-1 2 backlash-free recirculating ball screws, driven by AC servo motor, Fmax = 5 kN, stiffness 10 kN/mm 1 test area up to nominal load: Hfjdpfxeiq Hw Us Agteb Test area width: 420 mm (optional extensions: +190 mm / +330 mm / +620 mm) Max. testing stroke without test tools, adapter, and KMZ: 1025 mm (optional extensions: +250 mm / +500 mm) Optional: Conversion to floor-standing model, required additional assembly: base table Traverse Speeds: Testing speed: 0.001 – 2000 mm/min under full load Return speed: 2000 mm/min Force Measurement: Measuring range: within 0.4 – 100% of the nominal load, Class 1 (optional Class 0.5) (+/- 1% of the indicated value in accordance with DIN EN ISO 7500-1) Force measurement resolution: +/- 180,000 digits at 20ms integration time The machine is delivered with a factory test certificate. If factory or DKD calibration is required at the installation site, this must be charged separately upon customer request. Crosshead travel measurement: Incremental quadrature input with encoder monitoring, storage of the crosshead position Resolution of crosshead travel measurement:

Rok výroby: 2024, Stav: nový, číslo stroja/vozidla: H3000-H5000TM,

Stav: veľmi dobrý (použitý), Rok výroby: 2015, využiteľný objem nádrže: 500 l, Vyhrievaná miešacia nádrž Objem: 500 litrov Rok výroby: 2015 Stav: Výborný Nádrž je vybavená plne funkčným miešadlom a tlakovým plášťom. Vodný okruh dvojplášťa je vybavený výhrevným telesom a obehovým čerpadlom na cirkuláciu vody v plášti, čo zabezpečuje rýchle ohriatie produktu v nádrži. Predpríprava na inštaláciu vstupného/výstupného čerpadla je k dispozícii; ovládacie prvky sú už nainštalované v rozvádzači. Vhodná na ohrievanie kvapalín až tesne pod bod varu. Hfedpfxew Dr I Io Agtsb K dispozícii sú technické výkresy. Rozmery DxŠxV = 1500 mm x 1100 mm x 2050 mm

Rok výroby: 2008, Stav: veľmi dobrý (použitý), Instron SF602 od výrobcu automobilov, funkcia v poriadku, ale bez počítača Hsdpfxog R Iduj Agtjfb

Stav: pripravené na použitie (použité), celková výška: 3 900 mm, celková šírka: 2 900 mm, celková dĺžka: 8 000 mm, výrobca ovládačov: Heidenhain, pohotovostná hmotnosť: 13 000 kg, Typ: TMML6-centrum Maximálna vzdialenosť od stĺpa po stred vretena: 1210 mm (hĺbka kýlu) Zásobník na nástroje s 30 pozíciami Hfedpfxjv St Efe Agtjb Dopravník triesok Možnosť dodatočnej montáže nového riadenia Heidenhain Pôvodný stôl je možné opätovne použiť alebo je možné použiť T-drážkovú podlahovú dosku na obrábanie vyšších obrobkov Pozdĺžny pojezd osi X: 3023 mm Priečny pojezd osi Y: 800 mm Vertikálny pojezd osi Z (výška): 1528 mm Rozmery upínacej plochy - stôl: 4200 x 1000 mm Maximálna výška obrobku: 2000 mm Výkon na vretene: 20 kW Uchytenie frézovacieho vretena (ISO): ISO 50 Maximálny rozsah otáčok: 50 > 1980 ot/min

Rok výroby: 2017, Stav: takmer ako nový (použitý), Funkcionalita: plne funkčný, Fours H&C 2-úrovňová pec, max. 3460 mm x 2200 mm Rok výroby: 2024 Hedpjvyzh Rsfx Agtofb Rozmery podpier pre sklo: Podpera 1 = 3260 mm x 2200 mm Podpera 2 = 3460 mm x 2200 mm Približné vonkajšie rozmery pece: Šírka: 4300 mm Výška: 2710 mm Hĺbka: 3260 mm + koľajnice Maximálna teplota: 160 °C Výkon: S-LTD-298

Rok výroby: 2018, Stav: dobrý (použitý), Funkcionalita: plne funkčný, číslo stroja/vozidla: H3000TM, Universal testing machine H3000TM Made in Germany Crosshead travel: 520 mm Hfedpfxst Rg H Ao Agteb Working space depth: 66 mm Overall height: 1010 mm Weight: 45 kg Testing speed: 1 to 500 mm/min Return speed: 500 mm/min Travel resolution: 0.01 mm We offer a very large selection of grips: screw grips, wedge grips, pneumatic and hydraulic grips. Compression plates, bending fixtures, friction coefficient fixtures, and much more. Strain gauges, extensometers, long-travel transducers, clip-on transducers, and climate chambers. Force transducers available: 50N – 100N – 200N – 500N – 1000N – 2000N – or 3000N Including Hess software for Windows 8, 9, 10, or 11 for universal testing sequences, simple tests can also be performed without a PC, and a 5 kN SP 56g screw grip with pyramid or rubber jaws 30x50 mm. Factory calibration certificate with DAkkS-calibrated measuring instruments. Calibrated for both tensile and compression loading in 10 increments. The universal testing machine series H3000TM is a single-spindle machine featuring a robust construction of aluminium and stainless steel (V2A), equipped with recirculating ball screw drives, ball bushing guides, and a toothed belt drive. The bellows cover protects the spindle and guides. The testing machine is microprocessor-controlled and features a membrane keypad. The two-line LCD display shows force and displacement. The machine can be operated as a standalone unit or via PC using a USB interface. Travel measurement is performed with an encoder (0.01 mm visible resolution on LCD, internal 0.0001 mm). The machine is fitted with a standard load cell: 0.03% linearity and matching calibration. Optionally, a second channel for an additional load cell or displacement sensor can be added. The universal testing machine is available with two different travel paths, 500 mm or 1200 mm (with load cell, without test fixture). Scope of delivery: One load cell of your choice (50N – 100N – 200N – 500N – 1000N – 2000N – or 3000N), certificate, 220 V cable, USB cable, documentation, CE Declaration of Conformity. Load Cell 3000N Measurement range: 1-3000N tension and compression, with nominal 2mV/V output signal. Overload protection: +/- 100%, Linearity: +/- 0.05%, Hysteresis: +/- 0.03%, Reproducibility: +/- 0.02%, including 1.5m connection cable and calibration certificate.