Langloch vŕtačka / Rámová kolíkovacia vŕtačka

Ganner Gannomat Junior 323

Stav: ako nová (výstavný stroj), Rok výroby: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction systems of this series are H3 dust-tested, residual dust content less than 0.1 mg/m³. High extraction capacity with minimal space requirements. Maximum performance in this class. Very quiet operation. Iajdpfx Agscnw U Dotol Application Area Clean air extraction systems for wood chips and wood dust Designed for commercial operation Suitable for all woodworking machines with corresponding extraction nozzle diameter Can be used for multiple dust sources High-quality, well-thought-out construction Robust and compact housing made of galvanized steel sheet Extraction nozzle can be easily switched from left to right, for flexible use Large maintenance openings Large-capacity, mobile chip containers with clamping bracket and chip collection bag System is delivered fully assembled, ready for immediate use Mobile Description of the Filter Ultra-compact with maximum filter surface Filter material made of polyester fleece, aluminum-coated, washable for long service life Filter comes standard in antistatic design, certified and approved to M-BIA category Filter resistance monitoring via differential pressure switch, adjustable, with warning light on control box The fan is installed downstream of the filter Features: With newly developed locking device for secure positioning of the container All systems in this series H3 dust-tested, residual dust content less than 0.1 mg/m³ Scope of Delivery: Metal fan wheel Service opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter 2 fixed and 2 swivel castors with parking brake Pre-configured for connection of machine recognition for up to 8 machines and slide valve controls Manual filter cleaning Sound pressure attenuator available as an accessory Model: RLA 125 M Article No.: 5131256 Technical Data Extraction nozzle diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal air flow: 1095 m³/h Max. air flow: Vacuum at nominal flow: Filter surface: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from bottom edge of suction nozzle to floor: 850 mm Weight: 194 kg Location: Coming into stock at 54634 Bitburg

Stav: použitý, No. 04493 Combined Machine Steko 228 P.B.S. Pressing - Sanding - Sawing Used - Pneumatic veneer press with electric heating Aluminium heating plates 2280 x 1000 mm (L x W) Lower plate extendable Opening width approx. 145 mm Total pressing force 40 tonnes, maximum specific pressing pressure 2 kg/cm² Heating 2 x 1.8 kW - Long belt sanding machine 3 kW Ijdpfx Ajxl Ha Segtsal Table 2600 x 750 mm (L x W), extendable Sanding height 200 mm Belt length 6800 mm Belt width 120 - 150 mm Left/right run, speed 19 m/s - Panel saw / Veneer saw / Edging saw 2.2 kW With pneumatic pressure beam Cutting length approx. 2600 mm, adjustable cutting height 0 - 60 mm Maximum saw blade diameter 250 mm With chain feed - Extraction system for sanding machine and saw 0.55 kW Airflow approx. 11 m³/min Push-button control with main and emergency stop switches Machine on chassis Installation footprint according to manufacturer 7.5 m² Transport dimensions approx. 3900 x 2100 x 1400 mm (L x W x H) Weight approx. 2500 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended. Sale in as-is condition Technical data, condition description, year of manufacture and delivery scope according to manufacturer’s brochure and/or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded. Sold as seen. Terms of payment: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex stock

Stav: použitý, Hoblovačka a frézovací automat Weinig Powermat 500 na štvorstranné hobľovanie a profilovanie dreva s CNC riadením a rýchloupínacím systémom Powerlock. Počet vretien: 7 Vreteno 1: Dolné / 7,5 kW / 8 000 ot./min Vreteno 2: Pravé / 7,5 kW / 8 000 ot./min Vreteno 3: Ľavé / 7,5 kW / 8 000 ot./min Vreteno 4: Pravé / 7,5 kW / 8 000 ot./min Vreteno 5: Horné / 7,5 kW / 8 000 ot./min Vreteno 6: Horné / 7,5 kW / 8 000 ot./min Vreteno 7: Dolné / 7,5 kW / 8 000 ot./min Pracovná šírka: 260 mm Pracovná výška: 160 mm Posuv: 30 m/min / 4 kW Dĺžka zrovnávacej stola: 2 500 mm Vzduchový vankúšový stôl: Áno Riadenie: PowerCom Plus Iajdpfxexzdwyo Agtjl

Stav: dobrý (použitý), Predám pásovú brúska SANDYA CL110 Isdjvx Tnmspfx Agtsal

Stav: nový, Rok výroby: 2024, Martin Thickness Planer T 45 with XPLANE Cutterhead The T45 thickness planer offers ideal conditions for modern manufacturing: It delivers smoothly planed surfaces, is fast and simple to operate, and works extremely quietly. The standard electronic control makes setting the planing thickness incredibly easy, thanks to 99 memory slots for planing dimensions, ensuring the first workpiece is a perfect fit. Of course, the thickness table can be moved with a simple press of a button or incrementally adjusted upwards in 0.1 mm steps. The feed control switches are also conveniently within reach. The heavy, vibration-damping composite base, paired with the high-quality cutterhead bearings, guarantees excellent surface finishes. Thanks to its sound-insulated design, even the standard version operates at low noise levels. • Planing width: 630 mm • Weight: approx. 1,200 - 1,400 kg • Planing height: 2.8 - 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Speed: 5,000 rpm • Operation: 1-axis control for planing dimension, up to 99 values storable, 49 of which can be used for a freely programmable planing sequence; buttons for manual rapid and fine adjustment of planing thickness with digital display, push button for cutterhead start and stop, integrated operating hours counter • Cutterhead: Solid steel Xplane cutterhead Cutterhead with 3 spiral knife rows (33 convex carbide knives per row), supplied with a complete set of knives and a Torx T20 key; spindle speed 6,000 rpm included; The emission sound pressure level LpA during operation is reduced by 10 dB(A) • Thickness table: Electric thickness table adjustment with fine setting, travel speed 10 mm/s, mounted on 4 support spindles for tilt resistance, finely planed table surface • Feed: 2 speeds, 6 / 12 m/min, electrically switchable even during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, rollers are gentle on material and self-cleaning, easy roller replacement; segmented pressure beam at infeed • Extraction: High-lift, divided hood with chip extraction port Ø 160 mm, can be connected left or right (dual-sided connection possible in special cases); Minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication bar for oil lubrication points; bearing/cutterhead lubrication via grease nipples • Accessories: 1 grease gun filled with long-life grease 1 oil can 1 open-end wrench 1 tool for knife change 1 pair of dummy knives 640 mm 2 pairs TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Iajdpfxoqlck Ns Agtsl Operating noise (with extraction) 90 Dust emission: Low dust in accordance with DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Stav: použitý, Number of sanding units: 4 pcs. Sanding width: 190 mm Maximum sanding height: 180 mm Control: yes Weight: 3300 kg Dimensions (L/W/H): 2600x920x1890 mm Extraction port diameter: 2x180, 2x120 mm Double-sided sanding machine Löwer DSM 2004 ----- 4-belt sander + disk unit from above/below Manufacturer's description: ----- Double-sided four-belt single-wood sanding machine for sanding solid wood such as window frames, etc. Highly robust premium design with innovative details. Suitable for continuous heavy-duty use, even with high material removal rates. - Successive sanding units for pre-sanding, fine sanding, and finish sanding, each from above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and shoe 3. Finishing unit with fiber brush (see special equipment below) - Direct-driven sanding rollers for slip-free power transmission - Maintenance- and wear-free CERMET-coated sanding shoes with excellent thermal conductivity and absolute dimensional accuracy - External cooling of the sanding zones for cooler sanding and longer belt service life - Forced pneumatic-controlled sanding belt oscillation - Effective sanding dust extraction directly at the sanding rollers - Fine dust extraction at the tension rollers - Integrated brushing and finishing unit with large sanding dust extraction - Motorized sanding thickness adjustment via precision threaded spindles and large linear ball bearing sets on hardened and ground precision shafts, dust and dirt protected - Adjustment of material removal on the underside via precision threaded spindle with scale ring (resolution 0.1mm) - Sanding belt tension via pneumatic cylinder with constant tension force - Quick sanding belt changes with pneumatic belt relaxation in seconds - Possibility to adjust belt tracking during belt change - Electropneumatic compressed air monitoring - Infeed protection via contact roller for workpieces that are too thick - Workpiece transport via calibrated, slip- and adhesion-proof transport belts over heavy cast iron tables with finely planed surfaces and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and even workpiece transport - Feed gear motor with stepless speed adjustment 4-20 m/min - All motors electrically protected - Ergonomically arranged controls - Digital thickness display (resolution 0.1mm) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2-180 mm - Four brake motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4-20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm at 0.37 kW each - Extraction ports: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870 mm - Length (with soft disc 2740 mm): 2600 mm - Length with control panel (with soft disc 3035 mm): 2985 mm - Width: 880 mm - Height: 1910 mm - Weight approx. 3300 kg - Operating voltage: 400 Volt, 50 Hz, 3P - CE-certified Ijdpfx Aovu Hgbsgteal Equipped with the following options: - 4-belt sanding belt air blast directly via nozzles at the radii ...

Stav: použitý, Cross-cut saw 3 kW Spindle diameter: 50 mm Spindle length: 300 mm Number of tool sets: variable Control: CNC Dimensions (L/W/H): 2500 x 1700 x 2100 mm Weight: 1700 kg HABERKORN - Groove Milling Machine FZS-2 Electronic with infinitely variable slotting spindles and automatic roller table ----- Cross-cut saw ----- Spindle arrangement: top Three-phase motor 3 kW Spindle diameter: 30 mm Speed: 2800 rpm Saw blade diameter: 400 mm * Automatic brake with speed monitoring * Stepless saw positioning with Siko display * Safety and extraction hood with 100 mm suction port 2 Groove Spindles, 50 mm diameter ----- Power: 2 x 7.5 kW Speed: 4200 rpm Spindle diameter: 50 mm Tool diameter: approx. 360 mm Working length: 300 mm * Both groove spindles positionable via ball screw spindle * Freely programmable, 19 programs, display with function keys * Safety and extraction hood with 180 mm suction port * Automatic brake with speed monitoring Mitre Table ----- * Swivel range: +/- 65° Iajdpfswgwlksx Agtol * Automatically changing counter block (programmable) * Pneumatic clamp * High-precision electronic angle display * Automatic length compensation * Counter block always in cutting plane for any angle setting Special Equipment ----- Steplessly adjustable roller table feed Laser for workpiece positioning Manual length stop LA 2000 Length: 2500 mm Suction port diameter: 2 x 180 mm for groove spindles 1 x 100 mm for cross-cut saw ----- Price for the above-mentioned machine upon request! ----- Pictures show an identical model. Original images not yet available. (Technical specifications according to manufacturer's information – without guarantee!) All prices are net, plus statutory VAT.

Stav: použitý, Rok výroby: 2008, Fully equipped with cutting length extension to 540 mm incl. HM special blade 350 x 3.5 x 40 Z 108 trapezoidal teeth Flat tooth, negative, for aluminum cuts Used, top condition, low hours Manufacturer: Graule Model: ZS 135 Year of manufacture: 2008 Machine no.: 2008/30/23 Isdpfx Agjww Nd Tstoal CE type tested Motor: 2 kW Brake motor Cutting height approx. 135 mm Large cutting length extended to approx. 540 mm Blade diameter approx. 350 mm Saw blade bore approx. 30 mm Tiltable to the right Tiltable to the left Machine stand Right-sided roller table 3000 mm with stop and scale – RLH with handwheel adjustment, pneumatic clamping, and electronic digital display Left-sided roller table 5000 mm, type RO Feed brake Material stop made of aluminium Coolant spray device 2 x pneumatic workpiece clamps, right & left Pressure reducing valve Original price approx. €12,750.00 Location: 97447 Gerolzhofen, ex stock, unloaded, unpacked Handed over in as-inspected condition, without warranty or guarantee

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Vŕtací stroj na vŕtanie otvorov do schodiskových bočníc, madiel a zábradlí. Vŕtacia jednotka má výškové nastavenie pomocou vretena s mechanickým digitálnym ukazovateľom (0,1 mm). Vŕtacia jednotka sa otáča 60 stupňov doľava a 60 stupňov doprava. Upínanie vrtáka pomocou upínacej klieštiny (presná kruhová hádzavosť). Líniový laser pre smer vŕtania a polohovanie obrobku. Pneumatické upínacie valce. Rozmery stola: 1000 x 300 mm. Ovládanie nožným pedálom. Uvoľnením pedálu sa uvoľní trieska. Stroj je po generálnej oprave v dielni a je plne funkčný. Iasdovl E Tbspfx Agtel Veľmi kompaktný.

Stav: použitý, Rok výroby: 2007, Funkcionalita: plne funkčný, číslo stroja/vozidla: 3750, The machine applies glue to solid wood up to 18.0 mm thick as well as roll material up to 3.0 mm. It trims edge banding from rolls up to 3.0 mm thick, including PVC, ABS, and real wood veneer up to 2.0 mm. Features include flush trimming up to 18 mm, radius and chamfer milling stations, total length of 3.20 m, power consumption 7.1 kW, glue pot, end trimming shear, stepless feed, cross-cut saw for front and rear edges, flush milling unit, rounding milling unit, chassis, and a 100 mm extraction port. Iasdpfx Aoigad Esgtjl