Tlakový lis na telo

Ganner Concept 70 Eco

Rok výroby: 2025, Stav: nový, New machine Year of manufacture: 2025 Equipment and technical data: Supplied in standard configuration with: Robust, torsion-resistant steel frame in welded and bolted construction Lamellar pressing beam TOP with 6 elements, lamellar pressing beam SIDE with 5 elements Lamellar pressing beam with proven tolerance compensation (Ganner system) for tightly bonded carcass connections Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates Continuous pressing surface with a height of 95 mm at the lower vertical pressing beam Electromotive adjustment of both pressing beams via precision trapezoidal threaded spindles (with increased lead and running accuracy) and high-performance running nuts with grease reservoir Pressing is performed electromotively, via 2 separate worm gear motors (2 x 0.75 kW) The pressing force of the pressing beams is infinitely electronically adjustable by 2 potentiometers and controlled by frequency inverters, making the pressing force control absolutely wear-free Pressing force for horizontal pressing beam: min. 500 daN (kg), steplessly adjustable up to max. 2200 daN (kg) Pressing force for vertical pressing beam: min. 300 daN (kg), steplessly adjustable up to max. 2200 daN (kg) Pressing and positioning speed of the pressing beams with fine positioning via 3-stage selector switch: 5 / 10 / 25 mm/sec Knjdpfsw Nafkjx Afzed Jog mode for precise positioning of both pressing beams, e.g. for low pressing forces, drawers, and 45° carcasses Very simple operation using 6 separate push buttons, 8 movement sequences selectable via control unit Freely adjustable pressing time preselection 0-30 min (switchable to seconds or hours) with individually programmable opening dimensions for both pressing beams Post-pressing function to increase or reduce pressing force during the pressing process Working/feeding height: 300 mm Working dimensions: Length min: 150 mm, max: 2500 mm Height min: 150 mm, max: 1400 mm Depth: 700 mm Including surcharge for rapid traverse speed for fast positioning of the pressing beams, controlled via automatic workpiece detection with sensors in the pressing beams, pressing speed 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, sensors can be switched off for pressing of special components Including set of machine feet for working height of 500 mm Location: Flörsheim Availability: Short notice

Stav: veľmi dobrý (použitý), Rok výroby: 2016, LAMELLA - CASE CLAMP GANNOMAT «CONCEPT 70 ECO» complete in standard configuration with: - Sturdy, torsion-resistant frame made of steel, welded and bolted construction - Top lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly pressed cabinet joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support panels - Continuous pressing surface with 95 mm height on the lower vertical pressure beam - Electromotive adjustment of both pressure beams via precision trapezoidal-thread spindles (with increased lead and concentricity accuracy) and high-performance running nuts with grease reservoir - Clamping action is electromotive, via 2 separate worm gear motors (2 x 0.75 kW) - The pressing force of the pressure beams is infinitely electronically adjustable via 2 potentiometers and regulated by frequency converters, thus making the pressing force adjustment completely wear-free - Pressing force for horizontal beam min. 500 daN (kg) up to infinitely max. 2200 daN (kg) Pressing force for vertical beam min. 300 daN (kg) up to infinitely max. 2200 daN (kg) - Pressing and adjustment speed of the beams with fine positioning via 3-stage selector switch: 5 / 10 / 25 mm/sec Extremely simple operation - Working/feeding height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm Height min: 150 mm, max: 1400 mm Depth: 700 mm Machine No. 563.624 400V, 3Ph, 50Hz (3.2 kVA, 16 A) Set of machine feet for 500 mm working height Ksdpjw Td A Isfx Afzond Operating manual in German Factory reconditioned by Ganner, 6-month parts warranty Location: ex stock 54634 Bitburg - immediately available -

Stav: ako nová (výstavný stroj), Rok výroby: 2024, Technické údaje: Lamelový korpusový lis z našej výstavnej expozície; Pracovný rozsah: šírka od 150 do 2 550 mm, výška od 150 do 1 400 mm; hĺbka od 150 do 700 mm; Nastaviteľná prítlačná sila bočného prítlačného nosníka: 300/700/1100/1400/1800/2200 dN (kg); Kedjb Eln Djpfx Afzjnd Nastaviteľná prítlačná sila horného prítlačného nosníka: 500/800/1200/1500/1900/2200 dN (kg); Jednoduchá obsluha pomocou 6 samostatných tlačidiel; voľne nastaviteľný čas lisovania s automatickým otvorením; výška podávania 300 mm. Stroj je vystavený u nás v expozícii a je možné ho ihneď dodať. Miesto: sklad 54634 Bitburg.

Stav: veľmi dobrý (použitý), Rok výroby: 2013, LAMELLA – CARCASE PRESS GANNOMAT "CONCEPT 70 ECO" Complete in standard configuration with: Carcase connections. - Counter-pressure surfaces (side pressure wall, base) are 40 mm thick, coated, continuous support plates - Electrically powered adjustment of both pressing beams via precision trapezoidal-thread spindles (with increased lead accuracy and concentricity) and high-performance travelling nuts with grease reservoir. Kjdpfx Ajw Tdymsfzond - Hydraulic pressing by means of two separate worm gear motors (2 x 0.75 kW) - Pressing force: 2,000 daN (kg) per press beam - The pressing force of the pressing beam is electronically controlled and set using a frequency inverter, resulting in absolutely wear-free torque transmission. - Pressing and adjustment speed: 25 mm/sec - Extremely easy operation with six separate push buttons, six motion sequences selectable via control - Freely adjustable pre-selection for pressing time with automatic opening, 0–30 min (switchable to seconds or hours) - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2550 mm Height min: 150 mm, max: 1,400 mm Depth: 700 mm 1 rotary switch for variable pressing force: 1,000 / 1,500 / 2,000 daN (kg) Machine No. 380.324 400 V, 3Ph, 50 Hz (2.5 kVA, 16 A) Set of machine feet for working height 500 mm Machine used: Year of manufacture 2013, fully overhauled by Ganner, 6 months parts warranty Special price: Ex stock 54634 Bitburg - Immediately available -

Stav: nový, Rok výroby: 2025, Gannomat Concept 70 Eco Lamella Carcass Press with Rapid Traverse Knjdpfx Asiidm Nsfzjd Technical Data: Lamella carcass press from our showroom; Working range: width from 150 - 2,500 mm, height from 150 - 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements - Lamella pressure beams feature a proven tolerance compensation system for tightly pressed carcass joints - Counter-pressure surfaces are continuous, coated support plates, 40 mm thick - The pressing force of the pressure beams is infinitely electronically adjustable via 2 potentiometers and set using a frequency converter, which ensures absolutely wear-free torque transmission - Pressing force for horizontal pressure beam: min. 500 daN (kg) up to infinitely max. 2,200 daN (kg) - Pressing force for vertical pressure beam: min. 300 daN (kg) up to infinitely max. 2,200 daN (kg) - Included Option: Rapid traverse speed for fast positioning of the pressure beams, controlled by automatic workpiece detection with sensors in the pressure beams; pressing speed 5/10/25 mm/sec and rapid traverse speed 50 mm/sec; sensors can be deactivated for pressing special parts - Jog mode for precise positioning of both pressure beams, e.g., for low pressing forces, drawer assemblies, and 45-degree carcasses Easy operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm The machine is in our showroom and available for immediate delivery. Location: Ex stock 54634 Bitburg - immediately available -