Lamellová korpusová lis

Gannomat Concept 70-ECO

Stav: nový, Rok výroby: 2026, Gannomat Concept 70 Eco Lamella / Carcass Press with Rapid Traversing Technical Data: Lamella carcass press from our showroom; Working area: Width from 150–2,500 mm, Height from 150–1,400 mm, Depth 700 mm; - Upper lamella press beam with 6 elements, side lamella press beam with 5 elements - Lamella press beams equipped with field-proven tolerance compensation for tightly bonded carcass joints - Counterpressure surfaces are continuous, coated support plates, 40 mm thick - Pressing force of the press beams is continuously electronically adjustable via 2 potentiometers and set via frequency converter; therefore, torque transmission is absolutely wear-free - Pressing force for horizontal press beams min. 500 daN (kg) up to continuously max. 2,200 daN (kg) - Pressing force for vertical press beams min. 300 daN (kg) up to continuously max. 2,200 daN (kg) Nlodjy Egz Sjpfx Aaroa - Including Option: Rapid traverse travel speed for quick positioning of press beams, controlled via automatic workpiece detection with sensors in the press beams; pressing speed 5/10/25 mm/sec and rapid traverse travel speed 50 mm/sec; the sensors can be deactivated for pressing special parts - Jog mode for precise positioning of both press beams, e.g., for low pressing forces, drawers, and 45-degree cabinets Easy operation via 6 separate pushbuttons, freely adjustable pressing time preselection with automatic opening, feeding height 300 mm Machine is on display at our showroom and can be delivered immediately. Location: ex stock 54634 Bitburg - immediately available -

Stav: použitý, Rok výroby: 2011, prevádzkové hodiny: 26 920 h, IRB 6640-235/2.55 Year of manufacture: 2011 We are also pleased to offer this robot as a fully refurbished unit! Nodpfxjim Si As Aarola For further information, we are happy to assist you!

Rok výroby: 2025, stav: nový, New machine Year of manufacture: 2025 Equipment and technical data: Supplied in standard configuration with: Robust, torsion-resistant steel frame in welded and bolted construction Lamellar pressing beam TOP with 6 elements, lamellar pressing beam SIDE with 5 elements Lamellar pressing beam with proven tolerance compensation (Ganner system) for tightly bonded carcass connections Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates Continuous pressing surface with a height of 95 mm at the lower vertical pressing beam Electromotive adjustment of both pressing beams via precision trapezoidal threaded spindles (with increased lead and running accuracy) and high-performance running nuts with grease reservoir Pressing is performed electromotively, via 2 separate worm gear motors (2 x 0.75 kW) The pressing force of the pressing beams is infinitely electronically adjustable by 2 potentiometers and controlled by frequency inverters, making the pressing force control absolutely wear-free Pressing force for horizontal pressing beam: min. 500 daN (kg), steplessly adjustable up to max. 2200 daN (kg) Pressing force for vertical pressing beam: min. 300 daN (kg), steplessly adjustable up to max. 2200 daN (kg) Pressing and positioning speed of the pressing beams with fine positioning via 3-stage selector switch: 5 / 10 / 25 mm/sec Jog mode for precise positioning of both pressing beams, e.g. for low pressing forces, drawers, and 45° carcasses Very simple operation using 6 separate push buttons, 8 movement sequences selectable via control unit Freely adjustable pressing time preselection 0-30 min (switchable to seconds or hours) with individually programmable opening dimensions for both pressing beams Post-pressing function to increase or reduce pressing force during the pressing process Nsdpfx Aow Nafkjarsla Working/feeding height: 300 mm Working dimensions: Length min: 150 mm, max: 2500 mm Height min: 150 mm, max: 1400 mm Depth: 700 mm Including surcharge for rapid traverse speed for fast positioning of the pressing beams, controlled via automatic workpiece detection with sensors in the pressing beams, pressing speed 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, sensors can be switched off for pressing of special components Including set of machine feet for working height of 500 mm Location: Flörsheim Availability: Short notice

Stav: ako nová (výstavný stroj), Rok výroby: 2024, Technické údaje: Lamelový korpusový lis z našej výstavnej expozície; Njdpfjb Eln Dsx Aarela Pracovný rozsah: šírka od 150 do 2 550 mm, výška od 150 do 1 400 mm; hĺbka od 150 do 700 mm; Nastaviteľná prítlačná sila bočného prítlačného nosníka: 300/700/1100/1400/1800/2200 dN (kg); Nastaviteľná prítlačná sila horného prítlačného nosníka: 500/800/1200/1500/1900/2200 dN (kg); Jednoduchá obsluha pomocou 6 samostatných tlačidiel; voľne nastaviteľný čas lisovania s automatickým otvorením; výška podávania 300 mm. Stroj je vystavený u nás v expozícii a je možné ho ihneď dodať. Miesto: sklad 54634 Bitburg.

Stav: dobrý (použitý), Rok výroby: 1992, Single-piece wood sanding machine Njdpfxowyda Ue Aarsla Sanding from above and below Electric height adjustment with digital display Steplessly adjustable feed speed Star-delta start Pneumatic belt tensioning Main switch Sanding belt oscillation Finishing brushing unit above and below, manual height adjustment Working width: 190 mm Working height: 4 – 150 mm Minimum workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 – 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Incl. infeed and outfeed roller table L = 1600 mm, non-driven Note on used machines: • Errors in technical specifications and prior sale excepted. • Prices stated are ex location, loaded free of charge! • The machines have been cleaned and function tested. • All machines are purchased as inspected, with no claim to warranty. The buyer is free to inspect the machines at the site. • Special agreements are only valid in written form. (We will only respond to inquiries that include your address and telephone number!)

Stav: nový, Rok výroby: 2025, Gannomat Concept 70 Eco Lamella Carcass Press with Rapid Traverse Technical Data: Lamella carcass press from our showroom; Working range: width from 150 - 2,500 mm, height from 150 - 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements Njdeiidm Njpfx Aarola - Lamella pressure beams feature a proven tolerance compensation system for tightly pressed carcass joints - Counter-pressure surfaces are continuous, coated support plates, 40 mm thick - The pressing force of the pressure beams is infinitely electronically adjustable via 2 potentiometers and set using a frequency converter, which ensures absolutely wear-free torque transmission - Pressing force for horizontal pressure beam: min. 500 daN (kg) up to infinitely max. 2,200 daN (kg) - Pressing force for vertical pressure beam: min. 300 daN (kg) up to infinitely max. 2,200 daN (kg) - Included Option: Rapid traverse speed for fast positioning of the pressure beams, controlled by automatic workpiece detection with sensors in the pressure beams; pressing speed 5/10/25 mm/sec and rapid traverse speed 50 mm/sec; sensors can be deactivated for pressing special parts - Jog mode for precise positioning of both pressure beams, e.g., for low pressing forces, drawer assemblies, and 45-degree carcasses Easy operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm The machine is in our showroom and available for immediate delivery. Location: Ex stock 54634 Bitburg - immediately available -

Stav: nový, Rok výroby: 2025, Funkcionalita: plne funkčný, Gannomat Concept 70 Eco Cabinet Press Year of manufacture: 2025 including the following options: - Rapid traverse movement speed / adjustment speed up to 50 mm/sec - Machine feet (working height 500 mm) The Concept Eco and Concept Primus are ideal assembly aids for dowel joints when pressing carcases and for drawer manufacturing. Brief overview: • Proven tolerance compensation system (GANNOMAT system) • 2 potentiometers for stepless press force adjustment Nodpfx Ajvxgrrsarjla • Minimum pressing force: 300/500 daN (kg) for Concept Eco; minimum pressing force: 600/800 daN (kg) for Concept Primus • Maximum pressing force: 2200 daN (kg) for Concept Eco; maximum pressing force: 3500 daN (kg) for Concept Primus • 3 pressing and adjustment speeds: 5 / 10 / 25 mm/sec (with fine positioning / creep speed) • Freely adjustable preselection of pressing time with automatic opening • Concept Eco: Extremely easy operation using 6 separate push buttons for 8 motion sequences • Concept Primus: Intuitive operation via LCD display Universal application: • Carcases e.g. for furniture and cabinets • Mitre carcases • Carcases with protruding tops • Drawers • Simultaneous pressing of multiple carcases or drawers Advantages: • Field-proven tolerance compensation (GANNOMAT System) • Electromechanical carcase press with frequency-controlled gear motors • Independently operating vertical and horizontal pressing beams • Long service life thanks to proven, high-quality components • Solid and robust construction • Space-saving design • Carcase pressing = Simple + Fast + Efficient + Flexible + Precise + Professional • Easy operation thanks to user-friendly, practical control panel • Fast due to beam positioning speeds up to 50 mm/sec (option) • Efficient through precise pressing of various carcase sizes • Flexible due to adjustable parameters such as pressing force, pressing time, movement speeds • Precise due to angle-accurate pressing of furniture carcases and drawers • Professional production of carcases and drawers with a modern cabinet press

Stav: nový, Rok výroby: 2024, Funkcionalita: plne funkčný, celková hmotnosť: 1 060 kg, celková výška: 1 800 mm, celková šírka: 1 830 mm, celková dĺžka: 2 000 mm, dĺžka posuvu os X: 3 000 mm, dĺžka posuvu osi Y: 800 mm, dĺžka posuvu osi Z: 50 mm, maximálna rýchlosť vretena: 3 200 ot./min, hmotnosť obrobku (max.): 25 kg, výkon: 2,2 kW (2,99 k), spotreba vzduchu: 750 m³/h, prevádzkový tlak: 6 lišta, počet vretien: 12, pohotovostná hmotnosť: 975 kg, dĺžka záruky: 12 mesiace, Programovateľná vŕtačka so softvérom easy-smart-touch, s 3 riadenými osami X, Y, Z, s možnosťou frézovania drážky a vykonávania jednoduchých frézovacích operácií (príslušenstvo), obrábanie zhora a priechodný panel. Posuv panelu pomocou trojitej prísavky. Stroj vyrobený podľa smerníc CE. ŠTANDARDNÁ VÝBAVA HLAVOVÝ AGREGÁT Hlavu so samostatnými vretenami 7 vertikálnych vreten Nledpfsu U Hgiex Aaroa 1 dvojité horizontálne vreteno TH1 (os X) na vŕtanie spredu/dozadu MANUÁLNY prítlak panelu SNÍMAČ KONCA PANELU na dokonalé napojenia Softvér na vzdialenú podporu Príruba na odsávanie Kefa so stolom proti poškrábaniu na zabránenie usadzovaniu prachu a pilín Režim práce voliteľný - zo strany obsluhy alebo v kontinuálnom cykle HARDVÉR & SOFTVÉR 12” dotyková obrazovka so systémom NO TEXT (patent MAGGI) USB port a Ethernet port na import súborov, online podporu a aktualizácie softvéru Systém založený na Linux kernel CNC pamäť na až 1 000 programov Balenie: Zabalené na palete (2200x2050x160 mm - 123 kg)

Stav: použitý, Paint finishing line consisting of: Pos. 1 Belt Conveyor Infeed Transport - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed rate adjustable via handwheel approx. 2.5 – 7.5 m/min - Voltage/Frequency: 400 V / 50 Hz - Colour: RAL 7035 Pos. 2 Cefla Dedusting Machine - Manufacturer: Sorbini - Model: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm +/- 20 mm - Operator side: right - Roller conveyor - Air blast channel, top: 2 pcs. - Air blast channel, bottom: 1 pc. - Dedusting brush - With ionizing bar, top - With ionizing bar, bottom - With independent drive - With separate control unit - Length approx. 910 mm - Width approx. 2,600 mm - Weight 1,260 kg - Extraction nozzle dia. 180 + 120 mm - Total connected load: 7.6 kW - Voltage/Frequency: 400 V / 50 Hz Pos. 3 Venjakob VEN SPRAY Perfect Automatic Spray Coater - Manufacturer: Venjakob - Type: VEN SPRAY PERFECT - Year of manufacture: 2013 - Working width: 1,300 mm - Working height: 940 +/- 20 mm - Operator side: left - IR preheating, number of emitters: 2 pcs. - Dual drive for spray guns - Dry extraction - Extraction nozzle diameter: 600 mm - Exhaust air output: 10,000 m³/h - Belt conveyor system - Feed speed stepless adjustable approx. 4–10 m/min - Belt cleaning system - Lacquer recovery via V-belt system - Spray gun control: EPS-CNC CNC 7000 - Colour management system for 3+1 pumps - Number of installed airless spray guns: 4 pcs. - Quick-change system for spray devices - Remote maintenance system - Dust protection hood at machine outfeed - Exhaust air recirculation system - Controlled exhaust fan - Suitable for water-based coatings - Suitable for solvent-based coatings - Length: 5,509 mm - Width: 4,500 mm + 2,400 mm - Height: 3,380 mm + 510 mm - Total connected load: approx. 20–26 kW - Voltage/Frequency: 400 V / 50 Hz - Colour: RAL 7035 - Kremlin AVX AirMix spray guns - Small volume tank - Spray gun carrier arm system for quick removal of 4 AirMix spray guns from the spray booth, including quick couplings for pneumatic and material hoses. Pos. 4 Venjakob Belt Conveyor - Manufacturer: Venjakob Nsdpfx Aev I Akvjarela - Working width: 1,300 mm - Length: 2,000 mm - Feed rate adjustable via handwheel approx. 2.5 – 7.5 m/min - Voltage/Frequency: 400 V / 50 Hz - Colour: RAL 7035 Pos. 5 Cefla High-Performance Dryer - Manufacturer: Cefla - Type: VN 2000/5500/190.5/30 - Year of manufacture: 2003 - Working width: 1,300 mm - Number of pallets: 30 pcs. - Pallet length: 5,600 mm - Usable pallet length: 5,300 mm - Load capacity per pallet: 300 kg - Max part height: approx. 110 mm - Clear height between pallets: 120 mm - Centre-to-centre (pallet): 3,658 mm - Max part length: approx. 5,200 mm - Number of controlled temperature zones: 2 pcs. - Supply air output: 6,000 m³/h - Exhaust air output: 6,000 m³/h - Max heat output: 175 kW - Max drying temperature: approx. 55–60°C - With heat exchanger, hot water - Without hot water control valves - Through-feed direction in U-form - Infeed side: right - Feed speed variable via frequency converter approx. 2–20 m/min - Suitable for water-based coatings - Suitable for solvent-based coatings - Length: 7,820 mm - Width: 6,130 mm - Height: 3,905 mm - Total connected load: approx. 23 kW - Voltage/Frequency: 400 V / 50 Hz - Voltage fluctuation max. +/- 5 % - Without control valves and water pumps Pos. 6 Belt Conveyor Infeed Transport - Manufacturer: Cefla - Working width: 1,300 mm - Length: 2,000 mm - Feed rate adjustable via

Stav: veľmi dobrý (použitý), Portalová obráběcí linka Pohyblivý panel, pohyblivá pracovní hlava (horizontální obrobek) Numerické řízení Power Control, software WoodWOP Bezpečnostní kabina pracovní hlavy. Kompletní opláštění stroje pro ochranu Vstupní podávací stůl (podpěra obrobku). Výstupní stůl (s transportním pásem) Pohon obrobku třemi transportními pásy (posuvná rychlost (m/min) max. cca 130) Minimální rozměry obrobku (X-Y-Z) mm: 250 x 100 x 15 Maximální rozměry obrobku (X-Y-Z) mm: 2500 x 1050 x 60 Motorizovaný pásový dopravník pro odvoz odpadu Samostatný elektrický a řídicí rozvaděč. Celkový instalovaný výkon (kW): 99 2 PRACOVNÍ JEDNOTKY (HORNÍ) – (SERVOMOTOR X-Y-Z): 4 vrtací agregáty (4 x 2,3 kW) s 10 svislými vřeteny každý (celkově 40 svislých vřeten) 3 PRACOVNÍ JEDNOTKY (SPODNÍ) – (SERVOMOTOR X-Y-Z): 6 vrtacích agregátů (6 x 2,3 kW) s 40 svislými vřeteny každý (celkem 240 svislých vřeten) 2 PRACOVNÍ JEDNOTKY (HORIZONTÁLNÍ) 2 vrtací agregáty s horizontálními vřeteny 21 horizontálních vrtacích vřeten (pravá strana) + 21 horizontálních vrtacích vřeten (levá strana) 8 vstřikovacích trysek pro nanášení lepidla a vkládání kolíků (pravá strana) 8 vstřikovacích trysek pro nanášení lepidla a vkládání kolíků (levá strana) 2 zásobníky na kolíky pro automatické vkládání kolíků Nedpfx Aaegwbbqjrjla VOLITELNÉ: Čárový kód (bezdrátový skener)