Tlakový lis na telo

Gannomat Concept Eco

Stav: veľmi dobrý (použitý), Rok výroby: 2016, LAMELLA - CASE CLAMP GANNOMAT «CONCEPT 70 ECO» complete in standard configuration with: - Sturdy, torsion-resistant frame made of steel, welded and bolted construction - Top lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly pressed cabinet joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support panels - Continuous pressing surface with 95 mm height on the lower vertical pressure beam - Electromotive adjustment of both pressure beams via precision trapezoidal-thread spindles (with increased lead and concentricity accuracy) and high-performance running nuts with grease reservoir - Clamping action is electromotive, via 2 separate worm gear motors (2 x 0.75 kW) - The pressing force of the pressure beams is infinitely electronically adjustable via 2 potentiometers and regulated by frequency converters, thus making the pressing force adjustment completely wear-free - Pressing force for horizontal beam min. 500 daN (kg) up to infinitely max. 2200 daN (kg) Pressing force for vertical beam min. 300 daN (kg) up to infinitely max. 2200 daN (kg) - Pressing and adjustment speed of the beams with fine positioning via 3-stage selector switch: 5 / 10 / 25 mm/sec Extremely simple operation - Working/feeding height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm Height min: 150 mm, max: 1400 mm Depth: 700 mm Machine No. 563.624 400V, 3Ph, 50Hz (3.2 kVA, 16 A) Set of machine feet for 500 mm working height Operating manual in German Factory reconditioned by Ganner, 6-month parts warranty Fsdpfxsw Td A Ij Abzsgk Location: ex stock 54634 Bitburg - immediately available -

Stav: nový, Rok výroby: 2023, číslo stroja/vozidla: A2306/9210, Pneumatická lis na zásuvky a rámy typu Box V3.0 umožňuje jednoduchú a rýchlu montáž zásuviek a rámov. Vďaka svojmu funkčnému dizajnu je možné optimálne lisovať ako jednotlivé obrobky, tak aj celé zásuvky s rôznymi typmi spojov. Fjdpfx Ajgqfnzsbzogk Tým je zaručené dokonalé spojenie a tvar zásuviek i rámov. Špeciálny lisovací proces umožňuje lisovanie aj skladacích spojov a čiel so sklenenou výplňou bez ich deformácie. Maximálny lisovací tlak: vertikálne: 800 kg / horizontálne: 800 kg Nastaviteľné hĺbkové dorazy na zohľadnenie vystupujúcich čiel zásuviek počas lisovania Pomalé priblíženie pohyblivej lisovacej jednotky k obrobku Ovládanie lisu joystickom Voliteľné príslušenstvo: - Digitálny ukazovateľ pozície - Kit Door (na čelné lisovanie spojov rohov nábytku) Výhody: - Vysoká flexibilita: variabilne nastaviteľný lisovací tlak a rôzne rozmery zásuviek a rámov - Minimálne nutné prestavby umožňujú vysokú produktivitu - Intuitívne ovládanie - Vysoká bezpečnosť obsluhy vďaka CE bezpečnostným štandardom, napríklad obojručné ovládanie - Plug & Play

Stav: nový, Rok výroby: 2025, Funkcionalita: plne funkčný, Gannomat Concept 70 Eco Cabinet Press Year of manufacture: 2025 including the following options: - Rapid traverse movement speed / adjustment speed up to 50 mm/sec - Machine feet (working height 500 mm) The Concept Eco and Concept Primus are ideal assembly aids for dowel joints when pressing carcases and for drawer manufacturing. Brief overview: • Proven tolerance compensation system (GANNOMAT system) • 2 potentiometers for stepless press force adjustment • Minimum pressing force: 300/500 daN (kg) for Concept Eco; minimum pressing force: 600/800 daN (kg) for Concept Primus • Maximum pressing force: 2200 daN (kg) for Concept Eco; maximum pressing force: 3500 daN (kg) for Concept Primus • 3 pressing and adjustment speeds: 5 / 10 / 25 mm/sec (with fine positioning / creep speed) • Freely adjustable preselection of pressing time with automatic opening • Concept Eco: Extremely easy operation using 6 separate push buttons for 8 motion sequences • Concept Primus: Intuitive operation via LCD display Universal application: Fgedpfjvxgrrsx Abzek • Carcases e.g. for furniture and cabinets • Mitre carcases • Carcases with protruding tops • Drawers • Simultaneous pressing of multiple carcases or drawers Advantages: • Field-proven tolerance compensation (GANNOMAT System) • Electromechanical carcase press with frequency-controlled gear motors • Independently operating vertical and horizontal pressing beams • Long service life thanks to proven, high-quality components • Solid and robust construction • Space-saving design • Carcase pressing = Simple + Fast + Efficient + Flexible + Precise + Professional • Easy operation thanks to user-friendly, practical control panel • Fast due to beam positioning speeds up to 50 mm/sec (option) • Efficient through precise pressing of various carcase sizes • Flexible due to adjustable parameters such as pressing force, pressing time, movement speeds • Precise due to angle-accurate pressing of furniture carcases and drawers • Professional production of carcases and drawers with a modern cabinet press

Stav: dobrý (použitý), Rok výroby: 2014, Použitý korpusový lis - GANNOMAT Concept 70 Eco - Rok výroby: 2014 Fjdoxhc T Tjpfx Abzogk - Dostupné december 2025

Rok výroby: 1998, Stav: dobrý (použitý), Predávam kolíkovaciu vŕtačku s kolíkovacou jednotkou KOCH Sprint-PTP Rok výroby: 1998 Počet kolíkovacích vretien: 1 Počet jednotiek: 1 Programovanie CNC riadená motorická os Z Pracovná šírka: 1200 mm Maximálna pracovná výška: 36 mm Fodpjd Exwgofx Abzogk K dispozícii ihneď na predaj

Stav: použitý, Rok výroby: 2024, číslo stroja/vozidla: 1300.448, New showroom machine! List price: €32,665 Supplied in standard configuration with: - Sturdy, torsion-free steel frame in a welded and bolted construction - Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements - Lamella pressure beams with field-proven tolerance compensation (Ganner system) for tightly pressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick coated solid support panels - Continuous pressing surface 95 mm high on the lower vertical pressure beam - Electromotive adjustment of both pressure beams via precision trapezoidal threaded spindles (with increased pitch and concentricity accuracy) and high-performance traveling nuts with grease reservoirs - Pressing is electromotive, via 2 separate worm gear motors (2 x 0.75 kW) - The pressing force of the pressure beams is steplessly electronically adjustable via 2 potentiometers and controlled by frequency converters, making the press force control completely wear-free - Pressing force for horizontal pressure beam: min. 500 daN (kg) up to stepless max. 2200 daN (kg) - Pressing force for vertical pressure beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the beams with fine positioning via 3-stage selector switch: 5 / 10 / 25 mm/second - Simple operation via 6 separate pushbuttons; 8 motion sequences selectable via control Fodouf Hx Hepfx Abzjgk - Freely adjustable pressing time preselection with automatic opening 0-30 min (switchable to seconds or hours) - Working height/loading height: 300 mm - Working dimensions: Length min. 150 mm, max. 2,500 mm; Height min. 150 mm, max. 1,400 mm; Depth: 700 mm - Weight: approx. 1,800 kg net - Dimensions (L x W x H): 3.45 m x 0.95 m x 2.30 m - Electrical connection: 400V, 3Ph, 50Hz (3.2 kVA, 16A) Optional equipment: - Rapid traverse speed for quick positioning of the pressure beams, controlled by automatic workpiece detection via sensors in the pressure beams. Pressing speeds: 5 / 10 / 25 mm/sec and rapid traverse speed: 50 mm/sec. Sensors can be deactivated for pressing of special components - 1 set of machine feet (working height 500 mm)

Stav: veľmi dobrý (použitý), Rok výroby: 2013, LAMELLA – CARCASE PRESS GANNOMAT "CONCEPT 70 ECO" Complete in standard configuration with: Carcase connections. - Counter-pressure surfaces (side pressure wall, base) are 40 mm thick, coated, continuous support plates - Electrically powered adjustment of both pressing beams via precision trapezoidal-thread spindles (with increased lead accuracy and concentricity) and high-performance travelling nuts with grease reservoir. - Hydraulic pressing by means of two separate worm gear motors (2 x 0.75 kW) - Pressing force: 2,000 daN (kg) per press beam - The pressing force of the pressing beam is electronically controlled and set using a frequency inverter, resulting in absolutely wear-free torque transmission. - Pressing and adjustment speed: 25 mm/sec - Extremely easy operation with six separate push buttons, six motion sequences selectable via control - Freely adjustable pre-selection for pressing time with automatic opening, 0–30 min (switchable to seconds or hours) - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2550 mm Height min: 150 mm, max: 1,400 mm Fedsw Tdymspfx Abzjgk Depth: 700 mm 1 rotary switch for variable pressing force: 1,000 / 1,500 / 2,000 daN (kg) Machine No. 380.324 400 V, 3Ph, 50 Hz (2.5 kVA, 16 A) Set of machine feet for working height 500 mm Machine used: Year of manufacture 2013, fully overhauled by Ganner, 6 months parts warranty Special price: Ex stock 54634 Bitburg - Immediately available -

Stav: nový, Rok výroby: 2025, Výrobky Robland vyrába spoločnosť Landuyt N.V., so sídlom v Brugge, Belgicko. BM-3000: • Vyfrézovacie kotúčové ústrojenstvo (maximálna hĺbka drážky 10 mm) Fgsdpfjd Hz Nisx Abzok • Ľavý vrták 5 mm na vytváranie radových otvorov • Vrták 20 mm na montáž systémov Minifix • Frézovacie nástroj 8 mm na obmedzené vŕtacie a frézovacie operácie • Vrták 35 mm na montáž pántov • Hrúbka dosiek, ktoré je možné obrábať: 12–40 mm • Stroj je vybavený štvorpolohovým vrtacím skľučovadlom a pílovým kotúčom • Pracovný rozsah osi Y: vŕtanie: 900 mm; pílenie: 850 mm Technické údaje: • Rozsah osi Y: - Vŕtanie: 920 mm - Rezanie: 860 mm • Podpora osi X: 3000 mm • Osi Z: hrúbka dosiek 12 mm až 40 mm • Osi A: 360° • Posuvová rýchlosť: 20 m/min • Minimálne rozmery materiálu (X): 300 mm, (Y): 120 mm, (Z): 12 mm • Stroj je vybavený štvorpolohovým vrtacím skľučovadlom a pílovým kotúčom • Maximálny a minimálny Ø otvorov, ktoré je možné vŕtať: 3 mm – 35 mm • Pílka sa pohybuje po osi X • Maximálna hĺbka drážky pomocou pílového kotúča: 10 mm • Motor: 0,75 HP, 3x 400V / 3x 230V • Minimálna požadovaná odsávacia kapacita: 2300 m³/h

Stav: nový, Rok výroby: 2025, Gannomat Concept 70 Eco Lamella Carcass Press with Rapid Traverse Fjdpfx Abeiidm Nozogk Technical Data: Lamella carcass press from our showroom; Working range: width from 150 - 2,500 mm, height from 150 - 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements - Lamella pressure beams feature a proven tolerance compensation system for tightly pressed carcass joints - Counter-pressure surfaces are continuous, coated support plates, 40 mm thick - The pressing force of the pressure beams is infinitely electronically adjustable via 2 potentiometers and set using a frequency converter, which ensures absolutely wear-free torque transmission - Pressing force for horizontal pressure beam: min. 500 daN (kg) up to infinitely max. 2,200 daN (kg) - Pressing force for vertical pressure beam: min. 300 daN (kg) up to infinitely max. 2,200 daN (kg) - Included Option: Rapid traverse speed for fast positioning of the pressure beams, controlled by automatic workpiece detection with sensors in the pressure beams; pressing speed 5/10/25 mm/sec and rapid traverse speed 50 mm/sec; sensors can be deactivated for pressing special parts - Jog mode for precise positioning of both pressure beams, e.g., for low pressing forces, drawer assemblies, and 45-degree carcasses Easy operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm The machine is in our showroom and available for immediate delivery. Location: Ex stock 54634 Bitburg - immediately available -

Stav: nový, Automatická pokosová píla UK-450 - Priemer kotúča: 450 mm - Dĺžka obrábania podľa požiadaviek zákazníka - Automatické polohovanie - Automatické nastavovanie uhla pokosu (až do +/- 60°) Fgedpfed A Ttxsx Abzjk - Oblasti použitia: obrábanie dreva, plastov a hliníka - Podávacia dráha ako hladká dráha (voliteľne ako valčeková dráha) Ďalšie technické údaje a podrobnosti na požiadanie.