Special purpose vehicle trailer

GOLDHOFER STHP 8 (3+5)/GG 219 to/Pendelachsen/ausziehbar

Stav: použitý, maximálna hmotnosť nákladu: 175 620 kg, celková hmotnosť: 219 000 kg, konfigurácia náprav: > 3 nápravy, prvá registrácia: 01/2002, Výbava: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendle axle units with radio remote control. Technical total weight: 219,000 kg possible Technical payload: 175,620 kg possible Hydraulically suspended and 8-axle steerable Goldhofer low-bed semi-trailer, type STHP 8 (3+5), consisting of 4 heavy-duty modules with a detachable gooseneck and extendable excavator trough (up to 5 meters long) with 4 wheel recesses and ABS, allowing up to 175,620 kg payload (technically possible). Bsdpfx Aiez N Nrdsdjlp Comprising the following 4 separate heavy-duty module components: 1st Module: Hydraulic universal gooseneck, type STH/ST - Year of manufacture: 2002 - Compatible with heavy-duty module chassis, with drive-over load decks - Unladen weight: approx. 5,900 kg - Permitted fifth wheel load at front: 35,000 kg - Length: approx. 4.10 m - Fifth wheel height: approx. 1.30 m - King pin: 3.5" bolt - Plug-in aluminium side boards - Fully hydraulically adjustable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module - First registration: 14.11.2001 - As a single module, technical total weight: 108,000 kg; technical axle load possible: 36,000 kg at 5 km/h - Unladen weight: 10,350 kg - As a single module, technical payload up to 97,650 kg possible at 5 km/h - 8 hydraulic pendle axles, 24 wheels with 215/75/R17.5 tyres - Axle load: 25 t at 20 km/h - Vehicle width: 3 meters - Axle spacing: 1.5 meters - Max. steering angle: ±60° - Chassis-integrated, hydromechanical 2-circuit all-wheel forced steering with max. steering angle of 60° for the axle units and integrated hydraulic oil tank - Optimised bolt-tab coupling system front and rear for longitudinal combinations - Single-tyred pendle axle units, 8 wheels per axle line - Hydraulic axle compensation +/- 300 mm, hydropneumatic gas storage suspension - Hydraulic steering for all axles - BPW axles with drum brakes and ABS; technical axle load up to 34 t at 5 km/h 3rd Module: Extendable low-bed heavy-duty module – excavator bridge - Year of manufacture: 2002 - Internal dimensions: approx. 7.50 m long, 3.00 m wide, loading height 0.40 m - Construction height: 350 mm - Extendable up to approx. 5.00 m – telescopic - 4 wheel recesses with drive-on module at the head section - Construction height in wheel recess area: approx. 150 mm - Load capacity up to 80 t in low-bed and 175.6 t in total module STHP 8 (3+5) possible - Unladen weight: 11,900 kg - Hydraulic bolt-tab coupling at front and rear with claw coupling adapter 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module - First registration: 04.01.2002 - Technically possible total weight: 115,000 kg; technically possible axle loads: 23,000 kg at 5 km/h - Unladen weight: 14,200 kg - Technical payload up to 100,800 kg possible - Single-tyred hydraulic pendle axle units, 4 wheels per axle line, 20 wheels, 285/70 R 19.5 tyres - Hydraulic axle compensation +/- 300 mm, hydropneumatic gas storage suspension - Hydraulic steering for all axles - Radio remote control for steering axles Note: With the 4 heavy-duty modules, up to 3 different tractor combinations are possible! Payloads vary depending on the tractor combination. A current manufacturer’s certificate from Goldhofer is available for the special low-bed combination. The low-bed unit can be inspected and tested at our premises. Net price plus 19% VAT. All information without guarantee. Subject to errors and prior sale. Internal vehicle number: 2285 Advert also available in English.

Stav: použitý, maximálna hmotnosť nákladu: 175 620 kg, celková hmotnosť: 219 000 kg, konfigurácia náprav: > 3 nápravy, prvá registrácia: 01/2002, Výbava: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendle axle units with radio remote control. Technical total weight: 219,000 kg possible Technical payload: 175,620 kg possible Hydraulically suspended and 8-axle steerable Goldhofer low-bed semi-trailer, type STHP 8 (3+5), consisting of 4 heavy-duty modules with a detachable gooseneck and extendable excavator trough (up to 5 meters long) with 4 wheel recesses and ABS, allowing up to 175,620 kg payload (technically possible). Comprising the following 4 separate heavy-duty module components: 1st Module: Hydraulic universal gooseneck, type STH/ST - Year of manufacture: 2002 - Compatible with heavy-duty module chassis, with drive-over load decks - Unladen weight: approx. 5,900 kg - Permitted fifth wheel load at front: 35,000 kg - Length: approx. 4.10 m - Fifth wheel height: approx. 1.30 m - King pin: 3.5" bolt - Plug-in aluminium side boards - Fully hydraulically adjustable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module - First registration: 14.11.2001 - As a single module, technical total weight: 108,000 kg; technical axle load possible: 36,000 kg at 5 km/h - Unladen weight: 10,350 kg - As a single module, technical payload up to 97,650 kg possible at 5 km/h - 8 hydraulic pendle axles, 24 wheels with 215/75/R17.5 tyres - Axle load: 25 t at 20 km/h - Vehicle width: 3 meters - Axle spacing: 1.5 meters - Max. steering angle: ±60° - Chassis-integrated, hydromechanical 2-circuit all-wheel forced steering with max. steering angle of 60° for the axle units and integrated hydraulic oil tank - Optimised bolt-tab coupling system front and rear for longitudinal combinations - Single-tyred pendle axle units, 8 wheels per axle line - Hydraulic axle compensation +/- 300 mm, hydropneumatic gas storage suspension - Hydraulic steering for all axles - BPW axles with drum brakes and ABS; technical axle load up to 34 t at 5 km/h 3rd Module: Extendable low-bed heavy-duty module – excavator bridge - Year of manufacture: 2002 - Internal dimensions: approx. 7.50 m long, 3.00 m wide, loading height 0.40 m - Construction height: 350 mm - Extendable up to approx. 5.00 m – telescopic - 4 wheel recesses with drive-on module at the head section - Construction height in wheel recess area: approx. 150 mm - Load capacity up to 80 t in low-bed and 175.6 t in total module STHP 8 (3+5) possible - Unladen weight: 11,900 kg - Hydraulic bolt-tab coupling at front and rear with claw coupling adapter 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module - First registration: 04.01.2002 - Technically possible total weight: 115,000 kg; technically possible axle loads: 23,000 kg at 5 km/h - Unladen weight: 14,200 kg - Technical payload up to 100,800 kg possible - Single-tyred hydraulic pendle axle units, 4 wheels per axle line, 20 wheels, 285/70 R 19.5 tyres - Hydraulic axle compensation +/- 300 mm, hydropneumatic gas storage suspension - Hydraulic steering for all axles - Radio remote control for steering axles Note: With the 4 heavy-duty modules, up to 3 different tractor combinations are possible! Payloads vary depending on the tractor combination. A current manufacturer’s certificate from Goldhofer is available for the special low-bed combination. The low-bed unit can be inspected and tested at our premises. Net price plus 19% VAT. All information without guarantee. Subject to errors and prior sale. Internal vehicle number: 2285 Bjdpsz N Nrkjfx Aidelp Advert also available in English.

Stav: použitý, maximálna hmotnosť nákladu: 175 620 kg, celková hmotnosť: 219 000 kg, konfigurácia náprav: > 3 nápravy, prvá registrácia: 01/2002, Výbava: ABS, STHP 8 (3+5) 8-piece hydraulic swing BPW axle unit with remote control. Technically permissible total weight: 219,000 kg Payload: 175,620 kg Hydraulically suspended and 8-axle steerable Goldhofer low-bed trailer, Type STHP (3+5), comprising 4 heavy-duty modules with a detachable gooseneck, up to 5 m excavator low bed telescopic, with 4 wheel recesses and ABS. Technically possible payload up to 175,620 kg. Consists of the following 4 separate heavy-duty module components: 1st Module: Hydraulic Universal Gooseneck Type STH - Compatible with heavy-duty module bogies and drivable loading decks - Unladen weight: 5,900 kg - Permitted front fifth wheel load: 35,000 kg - Length approx. 4.10 m - Saddle height approx. 1.30 m - King pin: 3.5" - Plug-in aluminium sideboards - Fully hydraulically movable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module - As a single module: technically permissible total weight 108,000 kg, axle loads up to 36,000 kg at 5 km/h - Unladen weight: 10,350 kg - Technical payload as single module: up to 97,650 kg at 5 km/h - Hydraulic pendulum axles (8-fold), tyres 215/75 R17.5 - Axle load: 25 t at 20 km/h - Vehicle width: 3 m - Axle spacing: 1.5 m - Max. steering angle: ±60° - Hydromechanical 2-circuit all-wheel forced steering integrated with max. 60° steering angle per axle unit, integrated hydraulic oil tank - Front and rear pin-plate couplings optimised for longitudinal combinations - Single-wheel pendulum axle assemblies (8 wheels per axle line) - Hydraulic axle compensation: +/- 300 mm, hydropneumatic suspension with gas accumulator - Hydraulic steering for all axles - BPW axles with drum brakes, inc. ABS, technically possible axle load: 34 t at 5 km/h 3rd Module: Low bed heavy duty module, extendable, excavator deck - Year of manufacture: 2002 - Internal dimensions: approx. 7.50 m long, 3.00 m wide, 0.40 m loading height - Construction height: 350 mm - Extendable by approx. 5.00 m - Unladen weight: 11,900 kg - 4 wheel recesses with extension module in gooseneck area - Overall height in wheel recess area approx. 150 mm - Load capacity: up to 80 t on the lowbed, up to 175.6 t in total with STHP 8 (3+5) - Hydraulic bolt-plate coupling with claw coupling adapter, front/rear 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module - First registration: 04.01.2002 - Technically permissible total weight: 115,000 kg, axle loads up to 23,000 kg at 5 km/h - Unladen weight: approx. 14,200 kg - Technical payload: up to 100,800 kg - Single-tire hydraulic pendulum axle units, 4 wheels per axle line, 20 x 285/70 R19.5 tyres - Hydraulic axle compensation (+/- 300 mm), hydropneumatic suspension (gas accumulator) - Hydraulic steering for all axles - Radio remote control for steering axles 5. Notes: With the four heavy-duty modules, up to three different trailer combinations are possible! Payloads will vary depending on train configuration. The low bed can be demonstrated on site. Latest Goldhofer manufacturer's certificate for the special low-bed combination is available. Price: NET plus 19% VAT. All information provided without guarantee. Subject to errors and prior sale. Internal vehicle number: 2285 Bsdpfx Asz N Nq Hoidjlp Full advert also available in German / Inserat auch komplett in Deutsch verfügbar.

Stav: použitý, maximálna hmotnosť nákladu: 175 620 kg, celková hmotnosť: 219 000 kg, konfigurácia náprav: > 3 nápravy, prvá registrácia: 01/2002, Výbava: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendulum axle units with radio remote control. Technically permitted gross weight: 219,000 kg Technically permitted payload: 175,620 kg Hydraulically suspended, 8-axle steerable Goldhofer low-bed semi-trailer, type STHP 8 (3+5), consisting of 4 heavy-duty modules with a detachable gooseneck and a telescoping excavator low-bed deck up to 5 meters long, featuring 4 wheel recesses with ABS, and a technically possible payload up to 175,620 kg. Consisting of the following 4 separate heavy-duty module components: 1st Module: Hydraulic universal gooseneck, type STH / ST - Year of manufacture: 2002 - Compatible with heavy-duty module bogies and drive-on loading bridges - Unladen weight: approx. 5,900 kg - Permitted fifth wheel load at front: 35,000 kg - Length: approx. 4.10 m - Coupling height: approx. 1.30 m - King pin: 3.5" bolt - Removable aluminum side boards - Fully hydraulically adjustable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty bogie module - First registration: 14.11.2001 - As a single module, technically possible gross weight: 108,000 kg - Technically possible axle loads: 36,000 kg at 5 km/h - Unladen weight: 10,350 kg - Technically possible payload as a single module: up to 97,650 kg at 5 km/h - 8 hydraulic pendulum axles, 24 tires (215/75/R17.5) - Axle load: 25 t at 20 km/h - Vehicle width: 3 meters - Axle spacing: 1.5 meters - Max. steering angle: ±60° - Integrated in chassis: hydromechanical 2-circuit all-wheel forced steering with a max. steering angle of 60° for the axle units, with integrated hydraulic oil tank - Optimized pin-eye coupling at front and rear for longitudinal combinations - Single-tired pendulum axle units, 8 wheels per axle line - Hydraulic axle compensation +/- 300 mm, hydropneumatic nitrogen suspension - Hydraulic steering for all axles - BPW axles with drum brakes, ABS, and technically possible 34 t axle load at 5 km/h 3rd Module: Extendable heavy-duty low-bed module – excavator deck - Year of manufacture: 2002 - Internal dimensions: approx. 7.50 m length, 3.00 m width, 0.40 m loading height - Construction height: 350 mm - Extendable by approx. 5.00 m – telescopic - 4 wheel recesses with drive-on module at the front end - Construction height in wheel recess area: approx. 150 mm - Load capacity up to 80 t in the low-bed, and 175.6 t in the complete STHP8 (3+5) module combination - Unladen weight: 11,900 kg - Hydraulic pin-eye couplings with claw adapter at front and rear 4th Module: Goldhofer THP/ET5 5-axle heavy-duty bogie module - First registration: 04.01.2002 - Technically possible gross weight: 115,000 kg Blsdoz N Np Ajpfx Aidop - Technically possible axle loads: 23,000 kg at 5 km/h - Unladen weight: 14,200 kg - Technically possible payload: up to 100,800 kg - Single-tired hydraulic pendulum axle units, 4 wheels per axle line, 20 tires (285/70 R19.5) - Hydraulic axle compensation +/- 300 mm, hydropneumatic nitrogen suspension - Hydraulic steering for all axles - Radio remote control for steering axles Notes: Up to 3 different tractor-trailer combinations possible with these 4 heavy-duty modules! Payloads vary depending on tractor-trailer configuration. A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed can be tested at our facility. Price NET, plus 19% VAT. All information subject to change, errors and interim sale reserved. Internal vehicle number: 2285

Stav: použitý, maximálna hmotnosť nákladu: 175 620 kg, celková hmotnosť: 219 000 kg, konfigurácia náprav: > 3 nápravy, prvá registrácia: 01/2002, Výbava: ABS, STHP 8 (3+5) 8-piece hydraulic swing BPW axle unit with remote control. Technically permissible total weight: 219,000 kg Payload: 175,620 kg Hydraulically suspended and 8-axle steerable Goldhofer low-bed trailer, Type STHP (3+5), comprising 4 heavy-duty modules with a detachable gooseneck, up to 5 m excavator low bed telescopic, with 4 wheel recesses and ABS. Technically possible payload up to 175,620 kg. Consists of the following 4 separate heavy-duty module components: 1st Module: Hydraulic Universal Gooseneck Type STH - Compatible with heavy-duty module bogies and drivable loading decks - Unladen weight: 5,900 kg - Permitted front fifth wheel load: 35,000 kg - Length approx. 4.10 m - Saddle height approx. 1.30 m - King pin: 3.5" - Plug-in aluminium sideboards - Fully hydraulically movable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module - As a single module: technically permissible total weight 108,000 kg, axle loads up to 36,000 kg at 5 km/h - Unladen weight: 10,350 kg - Technical payload as single module: up to 97,650 kg at 5 km/h - Hydraulic pendulum axles (8-fold), tyres 215/75 R17.5 - Axle load: 25 t at 20 km/h - Vehicle width: 3 m - Axle spacing: 1.5 m - Max. steering angle: ±60° - Hydromechanical 2-circuit all-wheel forced steering integrated with max. 60° steering angle per axle unit, integrated hydraulic oil tank - Front and rear pin-plate couplings optimised for longitudinal combinations - Single-wheel pendulum axle assemblies (8 wheels per axle line) - Hydraulic axle compensation: +/- 300 mm, hydropneumatic suspension with gas accumulator - Hydraulic steering for all axles - BPW axles with drum brakes, inc. ABS, technically possible axle load: 34 t at 5 km/h 3rd Module: Low bed heavy duty module, extendable, excavator deck - Year of manufacture: 2002 - Internal dimensions: approx. 7.50 m long, 3.00 m wide, 0.40 m loading height - Construction height: 350 mm - Extendable by approx. 5.00 m - Unladen weight: 11,900 kg - 4 wheel recesses with extension module in gooseneck area - Overall height in wheel recess area approx. 150 mm - Load capacity: up to 80 t on the lowbed, up to 175.6 t in total with STHP 8 (3+5) Blodpfxsz N Np No Aidjp - Hydraulic bolt-plate coupling with claw coupling adapter, front/rear 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module - First registration: 04.01.2002 - Technically permissible total weight: 115,000 kg, axle loads up to 23,000 kg at 5 km/h - Unladen weight: approx. 14,200 kg - Technical payload: up to 100,800 kg - Single-tire hydraulic pendulum axle units, 4 wheels per axle line, 20 x 285/70 R19.5 tyres - Hydraulic axle compensation (+/- 300 mm), hydropneumatic suspension (gas accumulator) - Hydraulic steering for all axles - Radio remote control for steering axles 5. Notes: With the four heavy-duty modules, up to three different trailer combinations are possible! Payloads will vary depending on train configuration. The low bed can be demonstrated on site. Latest Goldhofer manufacturer's certificate for the special low-bed combination is available. Price: NET plus 19% VAT. All information provided without guarantee. Subject to errors and prior sale. Internal vehicle number: 2285 Full advert also available in German / Inserat auch komplett in Deutsch verfügbar.

Stav: použitý, maximálna hmotnosť nákladu: 175 620 kg, celková hmotnosť: 219 000 kg, konfigurácia náprav: > 3 nápravy, prvá registrácia: 01/2002, Výbava: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendulum axle units with radio remote control. Technically permitted gross weight: 219,000 kg Technically permitted payload: 175,620 kg Hydraulically suspended, 8-axle steerable Goldhofer low-bed semi-trailer, type STHP 8 (3+5), consisting of 4 heavy-duty modules with a detachable gooseneck and a telescoping excavator low-bed deck up to 5 meters long, featuring 4 wheel recesses with ABS, and a technically possible payload up to 175,620 kg. Consisting of the following 4 separate heavy-duty module components: 1st Module: Hydraulic universal gooseneck, type STH / ST - Year of manufacture: 2002 - Compatible with heavy-duty module bogies and drive-on loading bridges - Unladen weight: approx. 5,900 kg - Permitted fifth wheel load at front: 35,000 kg - Length: approx. 4.10 m - Coupling height: approx. 1.30 m - King pin: 3.5" bolt Bsdpfxez N Nqmo Aidolp - Removable aluminum side boards - Fully hydraulically adjustable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty bogie module - First registration: 14.11.2001 - As a single module, technically possible gross weight: 108,000 kg - Technically possible axle loads: 36,000 kg at 5 km/h - Unladen weight: 10,350 kg - Technically possible payload as a single module: up to 97,650 kg at 5 km/h - 8 hydraulic pendulum axles, 24 tires (215/75/R17.5) - Axle load: 25 t at 20 km/h - Vehicle width: 3 meters - Axle spacing: 1.5 meters - Max. steering angle: ±60° - Integrated in chassis: hydromechanical 2-circuit all-wheel forced steering with a max. steering angle of 60° for the axle units, with integrated hydraulic oil tank - Optimized pin-eye coupling at front and rear for longitudinal combinations - Single-tired pendulum axle units, 8 wheels per axle line - Hydraulic axle compensation +/- 300 mm, hydropneumatic nitrogen suspension - Hydraulic steering for all axles - BPW axles with drum brakes, ABS, and technically possible 34 t axle load at 5 km/h 3rd Module: Extendable heavy-duty low-bed module – excavator deck - Year of manufacture: 2002 - Internal dimensions: approx. 7.50 m length, 3.00 m width, 0.40 m loading height - Construction height: 350 mm - Extendable by approx. 5.00 m – telescopic - 4 wheel recesses with drive-on module at the front end - Construction height in wheel recess area: approx. 150 mm - Load capacity up to 80 t in the low-bed, and 175.6 t in the complete STHP8 (3+5) module combination - Unladen weight: 11,900 kg - Hydraulic pin-eye couplings with claw adapter at front and rear 4th Module: Goldhofer THP/ET5 5-axle heavy-duty bogie module - First registration: 04.01.2002 - Technically possible gross weight: 115,000 kg - Technically possible axle loads: 23,000 kg at 5 km/h - Unladen weight: 14,200 kg - Technically possible payload: up to 100,800 kg - Single-tired hydraulic pendulum axle units, 4 wheels per axle line, 20 tires (285/70 R19.5) - Hydraulic axle compensation +/- 300 mm, hydropneumatic nitrogen suspension - Hydraulic steering for all axles - Radio remote control for steering axles Notes: Up to 3 different tractor-trailer combinations possible with these 4 heavy-duty modules! Payloads vary depending on tractor-trailer configuration. A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed can be tested at our facility. Price NET, plus 19% VAT. All information subject to change, errors and interim sale reserved. Internal vehicle number: 2285

Stav: použitý, maximálna hmotnosť nákladu: 175 620 kg, celková hmotnosť: 219 000 kg, konfigurácia náprav: > 3 nápravy, prvá registrácia: 01/2002, Výbava: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendle axle units with radio remote control. Technical total weight: 219,000 kg possible Technical payload: 175,620 kg possible Hydraulically suspended and 8-axle steerable Goldhofer low-bed semi-trailer, type STHP 8 (3+5), consisting of 4 heavy-duty modules with a detachable gooseneck and extendable excavator trough (up to 5 meters long) with 4 wheel recesses and ABS, allowing up to 175,620 kg payload (technically possible). Comprising the following 4 separate heavy-duty module components: 1st Module: Hydraulic universal gooseneck, type STH/ST - Year of manufacture: 2002 - Compatible with heavy-duty module chassis, with drive-over load decks - Unladen weight: approx. 5,900 kg - Permitted fifth wheel load at front: 35,000 kg - Length: approx. 4.10 m - Fifth wheel height: approx. 1.30 m - King pin: 3.5" bolt - Plug-in aluminium side boards - Fully hydraulically adjustable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module - First registration: 14.11.2001 - As a single module, technical total weight: 108,000 kg; technical axle load possible: 36,000 kg at 5 km/h - Unladen weight: 10,350 kg - As a single module, technical payload up to 97,650 kg possible at 5 km/h - 8 hydraulic pendle axles, 24 wheels with 215/75/R17.5 tyres - Axle load: 25 t at 20 km/h - Vehicle width: 3 meters - Axle spacing: 1.5 meters - Max. steering angle: ±60° - Chassis-integrated, hydromechanical 2-circuit all-wheel forced steering with max. steering angle of 60° for the axle units and integrated hydraulic oil tank - Optimised bolt-tab coupling system front and rear for longitudinal combinations - Single-tyred pendle axle units, 8 wheels per axle line Bledpoz N Npvofx Aidjp - Hydraulic axle compensation +/- 300 mm, hydropneumatic gas storage suspension - Hydraulic steering for all axles - BPW axles with drum brakes and ABS; technical axle load up to 34 t at 5 km/h 3rd Module: Extendable low-bed heavy-duty module – excavator bridge - Year of manufacture: 2002 - Internal dimensions: approx. 7.50 m long, 3.00 m wide, loading height 0.40 m - Construction height: 350 mm - Extendable up to approx. 5.00 m – telescopic - 4 wheel recesses with drive-on module at the head section - Construction height in wheel recess area: approx. 150 mm - Load capacity up to 80 t in low-bed and 175.6 t in total module STHP 8 (3+5) possible - Unladen weight: 11,900 kg - Hydraulic bolt-tab coupling at front and rear with claw coupling adapter 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module - First registration: 04.01.2002 - Technically possible total weight: 115,000 kg; technically possible axle loads: 23,000 kg at 5 km/h - Unladen weight: 14,200 kg - Technical payload up to 100,800 kg possible - Single-tyred hydraulic pendle axle units, 4 wheels per axle line, 20 wheels, 285/70 R 19.5 tyres - Hydraulic axle compensation +/- 300 mm, hydropneumatic gas storage suspension - Hydraulic steering for all axles - Radio remote control for steering axles Note: With the 4 heavy-duty modules, up to 3 different tractor combinations are possible! Payloads vary depending on the tractor combination. A current manufacturer’s certificate from Goldhofer is available for the special low-bed combination. The low-bed unit can be inspected and tested at our premises. Net price plus 19% VAT. All information without guarantee. Subject to errors and prior sale. Internal vehicle number: 2285 Advert also available in English.

Stav: použitý, maximálna hmotnosť nákladu: 175 620 kg, celková hmotnosť: 219 000 kg, konfigurácia náprav: > 3 nápravy, prvá registrácia: 01/2002, Výbava: ABS, STHP 8 (3 + 5) Bsdpjz N Nqasfx Aidelp 8 hydraulic BPW pendle axle units with radio remote control. Technical total weight: 219,000 kg possible Technical payload: 175,620 kg possible Hydraulically suspended and 8-axle steerable Goldhofer low-bed semi-trailer, type STHP 8 (3+5), consisting of 4 heavy-duty modules with a detachable gooseneck and extendable excavator trough (up to 5 meters long) with 4 wheel recesses and ABS, allowing up to 175,620 kg payload (technically possible). Comprising the following 4 separate heavy-duty module components: 1st Module: Hydraulic universal gooseneck, type STH/ST - Year of manufacture: 2002 - Compatible with heavy-duty module chassis, with drive-over load decks - Unladen weight: approx. 5,900 kg - Permitted fifth wheel load at front: 35,000 kg - Length: approx. 4.10 m - Fifth wheel height: approx. 1.30 m - King pin: 3.5" bolt - Plug-in aluminium side boards - Fully hydraulically adjustable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module - First registration: 14.11.2001 - As a single module, technical total weight: 108,000 kg; technical axle load possible: 36,000 kg at 5 km/h - Unladen weight: 10,350 kg - As a single module, technical payload up to 97,650 kg possible at 5 km/h - 8 hydraulic pendle axles, 24 wheels with 215/75/R17.5 tyres - Axle load: 25 t at 20 km/h - Vehicle width: 3 meters - Axle spacing: 1.5 meters - Max. steering angle: ±60° - Chassis-integrated, hydromechanical 2-circuit all-wheel forced steering with max. steering angle of 60° for the axle units and integrated hydraulic oil tank - Optimised bolt-tab coupling system front and rear for longitudinal combinations - Single-tyred pendle axle units, 8 wheels per axle line - Hydraulic axle compensation +/- 300 mm, hydropneumatic gas storage suspension - Hydraulic steering for all axles - BPW axles with drum brakes and ABS; technical axle load up to 34 t at 5 km/h 3rd Module: Extendable low-bed heavy-duty module – excavator bridge - Year of manufacture: 2002 - Internal dimensions: approx. 7.50 m long, 3.00 m wide, loading height 0.40 m - Construction height: 350 mm - Extendable up to approx. 5.00 m – telescopic - 4 wheel recesses with drive-on module at the head section - Construction height in wheel recess area: approx. 150 mm - Load capacity up to 80 t in low-bed and 175.6 t in total module STHP 8 (3+5) possible - Unladen weight: 11,900 kg - Hydraulic bolt-tab coupling at front and rear with claw coupling adapter 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module - First registration: 04.01.2002 - Technically possible total weight: 115,000 kg; technically possible axle loads: 23,000 kg at 5 km/h - Unladen weight: 14,200 kg - Technical payload up to 100,800 kg possible - Single-tyred hydraulic pendle axle units, 4 wheels per axle line, 20 wheels, 285/70 R 19.5 tyres - Hydraulic axle compensation +/- 300 mm, hydropneumatic gas storage suspension - Hydraulic steering for all axles - Radio remote control for steering axles Note: With the 4 heavy-duty modules, up to 3 different tractor combinations are possible! Payloads vary depending on the tractor combination. A current manufacturer’s certificate from Goldhofer is available for the special low-bed combination. The low-bed unit can be inspected and tested at our premises. Net price plus 19% VAT. All information without guarantee. Subject to errors and prior sale. Internal vehicle number: 2285 Advert also available in English.