FRÉZKA S PEVNÝM HRIADEĽOM

Griggio T220

Stav: použitý, Slotting spindle 1 pc. Number of milling units 5 pcs. Spindle diameter 50 mm Control Weinig, PC-Nexus # 2774 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and fully checked before delivery ----- Technical Data Summary (Any additionally included accessories upon request) Pos. 1: Cross-cut saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3 kW > Radial adjustment pneumatically controlled in 8 positions, e.g. for top edge rounding > Laser guide light for identifying the saw section Pos. 2: Horizontal rounding unit, below ----- > Position: horizontal below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length: 25 mm > Spindle speed: 9,000 rpm > Max. tool swing diameter: 130 mm > Axial adjustment mechanically coupled with cross-cut saw > Radial adjustment pneumatically controlled on/off NC-controlled length stop ----- > Length: 3,500 mm > Electronic length stop Pos. 3: Tenoning and slotting spindle ----- > Number of tools: variable, continuously adjustable, NC > Tool clamping length: 320 mm > Spindle stroke, vertical: variable 254 mm, continuously adjustable, NC-controlled > Spindle speed: 3,500 rpm > Max. tool swing diameter: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Pos. 4: 1st profiling spindle (climb and conventional milling) Chedpfx Afovu Hghewjf ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool swing diameter: 232 mm > Motor power: 7.5 kW Pos. 5: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, continuously adjustable, NC > Tool clamping length: 320 mm > Spindle stroke, vertical: variable 254 mm, continuously adjustable, NC-controlled > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool swing diameter: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash bar guide consisting of: Guide rail in the stop (area of the climb milling spindle), Sash support bar from above in the area of the vertical profiling unit on the right and profiling spindle. Pos. 6: Horizontal profiling unit, above ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 9,000 rpm > Max. tool swing diameter: 130 mm > Axial adjustment: 30 mm, 8 positions > Radial adjustment: 125 mm, 8 positions Pos. 7: 3rd profiling spindle (hardware spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment: 115 mm, 8 positions > Radial adjustment: 110 mm, 8-position turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool swing diameter: 210 mm > Motor power: 3.0 kW Pos. 8: Profiling/grooving unit from below ----- > Motor power: 3.0 kW > Tool clamping length: 125 mm > ...

Stav: dobrý (použitý), Drážkovacie kotúče, frézovacie náradie na okná, vymeniteľné rezné doštičky, náradie na výrobu okien - Drážkovacie kotúče, frézovacie náradie vhodné pre: drevené okná - Dufix: č./variant 46616 - Upínanie: Ø 50 mm Cedpfsb A Np Nsx Afwshf - Hmotnosť: 6,8 kg

Stav: veľmi dobrý (použitý), Bloková lepiaca lis STROMAB SL2-6000 Dĺžka lepenia: 6000 mm Výška lepenia: 1200 mm Maximálna šírka lepenia: 200 mm Počet vertikálnych hydraulických prítlakov: 12 Počet čelných prítlakov: 6 Priemer valca: 70 mm Tlak vertikálneho valca: 7300 kg CE certifikát Cjdowzg Scspfx Afwohf Technická dokumentácia DTR

Stav: použitý, Mörtiková a drážkovacia fréza, fréza na ozuby a drážky, stroj na výrobu čapov a drážok, drážkovací rotor, stroj na čapovanie a drážkovanie, frézka na čapy a drážky - Výrobca: Festo, stroj na frézovanie čapov a drážok - Typ: ZA 101/S - Technické údaje: viď typový štítok/fotografie - Rozmery: 1675/1545/V1330 mm Chsdpsf D H E Nsfx Afwsf - Hmotnosť: 546 kg

Stav: dobrý (použitý), Zlaté / Stehle / Fantacci / Leitz Okenní nářadí pro dřevěná okna použité Csdpsixtudsfx Afwehf různé typy, na vyžádání

Stav: nový, Kód: N0015 Značka: RESCO Model: TENONE Nástroje pre čapovaciu frézku Chjdpfx Afed Ezquewef 4 ks skupín, priemer 300 mm, Z=4, F.50

Stav: veľmi dobrý (použitý), Tenon and Mortise Machine WEINIG Type 51 Swiveling studio window device with digital angle display Roller table with automatic feed, 6 m/min. Roller table length approx. 2,100 mm Pneumatic workpiece clamping automatic counter wood changer Cross-cut saw Pneumatically indexed 4-way turret Motor approx. 3 kW / 380 / 400 V / 50 Hz Saw blade diameter = 350 mm Saw blade speed 2,800 rpm Mortising spindle Diameter D = 50 mm Clamping length 320 mm Spindle motor approx. 11 kW / 380 / 400 V / 50 Hz Spindle speed 3,000 rpm Max. tool diameter 320 mm Length stop system Machine incl. tooling Installation dimensions L x W approx. = 2,700 x 2,800 mm Weight approx. 2,000 kg Note for used machines: • Subject to technical changes and prior sale. • Prices are ex location – free loaded onto truck! • Machines have been cleaned and function tested. • All machines are sold as inspected, without any guarantee or warranty. Buyers are welcome to inspect the machines at their location. • Special agreements are only valid in written form. Chedpfx Asv Tb Hgjfwof (We only answer inquiries with your address and phone number!)

Stav: veľmi dobrý (použitý), Rok výroby: 2007, Funkcionalita: plne funkčný, Rámový lis CMB SFR 4500×200 Pracovná dĺžka: 4500 mm Pracovná šírka: 200 mm Pracovná výška: 1200 mm Počet vertikálnych prítlačiek: 9 Počet čelných prítlačiek: 4 Prevádzkový tlak: 250 bar Cedpfxjv Scz Ao Afwshf Motor hydraulického čerpadla: 1,5 kW Hmotnosť: cca 2500 kg

Stav: použitý, Slitting spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm 1 used Weinig Unicontrol 6 with GLS ----- For sale on behalf of customer Technical Data Summary ----- 1. Cross-cut saw ----- Cross-cut saw, pneumatic, with 8-position revolver stop Spindle speed: 2800 rpm Spindle diameter: 40 mm Chjdpsxvtggsfx Afwsf Maximum tool diameter: 350 mm Motor power: 3 kW Laser guide for recognizing the saw section Manual length stop 4100 mm 1. Tenon and slitting spindle ----- Number of tools: 3 / 4 pcs. Tool clamping length: 320 mm Vertical spindle stroke pneumatic: 240 mm for timber thickness IV 68-92 Spindle speed: 3500 rpm Spindle diameter: 50 mm Maximum tool diameter: 320 mm Motor power: 11 kW 1. Profiling spindle - synchronous spindle (climb and counter-climb) ----- Position: vertical, right Number of tools: 1 pc. Tool clamping length: 120 mm Spindle speed: 6000 rpm Spindle diameter: 50 mm Maximum tool circle: 232 mm Motor power: 7.5 kW 2. Profiling spindle ----- Position: vertical, right Number of tools: 3 / 4 pcs. Tool clamping length: 320 mm Vertical spindle stroke pneumatic: 240 mm for timber thickness IV 68-92 Spindle speed: 6000 rpm Spindle diameter: 50 mm Maximum tool circle: 232 mm Motor power: 11 kW 3. Profiling spindle (fitting spindle) ----- Position: vertical, right Number of tools: 3 pcs. Spindle speed: 6000 rpm Spindle diameter: 40 mm Maximum tool circle: 180 mm Motor power: 3 kW Clamping length: 150 mm 4. Glazing bead saw, horizontal-vertical indexed ----- Position: horizontal top Number of tools: 1 pc. Tool clamping length: 40 mm Spindle diameter: 40 mm Motor power: 3 kW Axial feed: 2 positions Radial feed: 2 positions Further features ----- Rebating unit for tear-free rebating Double-part package Return conveyor for single-operator use at working height: Swivel tray Screen control, 99 programs Angled window fitting unit Electronic angle display for angled windows INCLUDES OPPOLD window tooling, year 2013: Oppold IV 68/78/92 timber Oppold IV 68/78 timber-aluminium Tools are sold in the current condition, quantity, and with accessories as currently available. Note regarding window cuts, tooling drawings, tool system lists: Engelfried GmbH does not provide a guarantee that the tools actually supplied match the stated and drawn systems. (Specifications according to manufacturer - without guarantee!)

Stav: použitý, Slot spindle 1 unit Number of milling units: 4 Spindle diameter: 50 mm # 2809 Weinig Unicontrol 6 ----- Technical Data Overview (Please inquire about any additional included accessories) Pos. 1: Crosscut Saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide for identification of saw cut section CNC-Controlled Length Stop ----- > Length: 3500 mm > Electronic length stop including positioned crosscut saw Pos. 2: Tenoning and Slotting Spindle ----- > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Vertical pneumatic spindle stroke: 240 mm for wood thickness 68 - 92 mm > Spindle speed: 3000 rpm > Max. cutter circle: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 360 mm > Motor power: 11 kW Pos. 3: 1st Profiling Spindle (Climb & Conventional Cut) ----- > Position: Vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. cutter circle: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd Profiling Spindle ----- > Position: Vertical right > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Vertical pneumatic spindle stroke: 240 mm for wood thickness 68 - 92 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm Chedpfoxtvgkex Afwsf > Max. cutter circle: 232 mm > Motor power: 11 kW 2 axially indexed feed rollers opposite the profiling spindle, for the processing of narrow, short parts (e.g., glazing bars) Sash bar guide consisting of: Sash bar support rail from above, located in the area of the vertical right profiling unit and profiling spindle Pos. 5: Horizontal Top Profiling Unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. cutter circle: 130 mm > Axial adjustment: 30 mm, 2 positions > Radial adjustment: 125 mm, 4 positions, manual Pos. 6: 3rd Profiling Spindle (Fitting Spindle) ----- > Position: Vertical right > Tool clamping length: 160 mm > Axial adjustment: 115 mm, 8 positions via pneumatic turret > Radial adjustment: 110 mm, 8 positions via pneumatic turret > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Max. cutter circle: 210 mm > Motor power: 3.0 kW Additional features ----- > Electric feed height adjustment incl. mechanical digital display and manual feed rail clamping > Scribing device for splinter-free rebating > Twin part package > Return conveyor for one-man operation: swivel belt > Screen-based control > Angled window device > Electronic angle display for angled windows > Industrial PC with Windows PC control/NEXUS Extraction connection diameters: ----- Crosscut saw: 80 mm Slot spindle: 140 mm Profile spindle 1: 140 mm Profile spindle 2: 140 mm Grooving unit: ...